Description
Introduction to 960GB Solid State Drives
The 400-AMIS Dell 960GB MLC SATA 6GBPS Mixed Use 2.5inch Internal Solid State Drive is a high-performance storage solution designed for use in Dell servers and other compatible devices. The drive utilizes Multi-Level Cell (MLC) NAND Flash technology, which provides a balance between cost and performance. With a capacity of 960GB, this drive provides ample storage space for a wide range of applications.
The drive features a SATA 6GBPS interface, which allows for fast data transfer speeds of up to 600MB/s. The mixed use design of the drive is optimized for a balance of read and write performance, making it suitable for use in a variety of environments including enterprise, data centers, and cloud computing.
The 2.5-inch form factor of the drive makes it easy to install and integrate into existing systems, and the solid state design ensures that it is durable and reliable. Overall, the 400-AMIS Dell 960GB MLC SATA 6GBPS Mixed Use 2.5inch Internal Solid State Drive is an excellent choice for businesses and organizations looking for a high-performance, high-capacity storage solution.
Scalability and Expansion
Scalability refers to the ability of a system or network to handle an increasing amount of work or load. In the case of the Dell 960GB MLC SATA 6GBPS Mixed Use 2.5inch Internal Solid State Drive, scalability refers to its ability to handle an increasing amount of data storage as the need for storage space grows.
Expansion refers to the ability to add more storage capacity to a system. In the case of the Dell 960GB MLC SATA 6GBPS Mixed Use 2.5inch Internal Solid State Drive, expansion could mean adding additional drives to increase the overall storage capacity of the system. This can be done by adding additional internal drives or by adding external storage devices such as a network-attached storage (NAS) or a storage area network (SAN).
Together, scalability and expansion allow for the Dell 960GB MLC SATA 6GBPS Mixed Use 2.5inch Internal Solid State Drive to adapt to the changing storage needs of a system and ensure that it can handle the increasing amount of data storage required.
Installation and Setup SSD
Installation and setup of the Dell 960GB MLC SATA 6GBPS Mixed Use 2.5inch Internal Solid State Drive (SSD) is a relatively simple process. The following are the steps to install and set up the SSD:
- Before installing the SSD, ensure that your computer is turned off and unplugged from the power source. Open the computer case by removing the screws or pressing the release button.
- Locate the existing hard drive in your computer. Depending on your computer’s make and model, the hard drive may be located in different places.
- Remove the existing hard drive by unscrewing it from the drive bay. Carefully disconnect any cables that are connected to the hard drive.
- Take the new SSD out of its packaging and carefully place it in the drive bay. Secure the SSD using the screws that were removed from the old hard drive.
- Reconnect any cables that were disconnected from the old hard drive. Make sure that the cables are properly connected to the new SSD.
- Close the computer case and plug the computer back in. Turn on the computer and enter the BIOS setup.
- In the BIOS setup, navigate to the “Boot” section and set the new SSD as the primary boot device. Save the changes and exit the BIOS setup.
- The computer will now boot from the new SSD. You will need to install an operating system on the new SSD before using it.
- After installing the operating system, you can use the SSD as a primary storage device for your computer.
It is important to note that the above steps may vary slightly depending on the make and model of your computer. It is always recommended to consult the computer’s manual or the manufacturer’s website for specific instructions.
Detail Description
- Manufacturer: Dell
- MPN: 400-AMIS
- Type : Solid State Drive(SSD)
- SSD-Type : 960GB SATA 6GBPS
- SKU: 400-AMIS
Performance
- Form Factor 2.5-inch
- Capacity 960 GB
- Flash Memory Technology Multi-level Cell (MLC)
- Drive Interface Type SATA 6.0 GBPS
Dimensions & Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
