Description
Introduction of SAS Hard Drive
The introduction section of a product description for the 400-AMSC Dell 8TB 7.2K RPM SAS 12GBPS Hard Drive would provide an overview of the product and its key features.
This section would likely include information such as the product’s name and model number, the manufacturer (Dell), the storage capacity (8TB), the rotational speed (7.2K RPM), the interface (SAS 12GBPS), and any other notable features or specifications.
Additionally, this section may include a brief description of the intended use or target market for the product, such as enterprise storage or data center use. The introduction should be brief but informative and should give the reader a good understanding of the product they are considering purchasing.
Data Transfer Speeds
The data transfer speed of the 400-AMSC Dell 8TB 7.2K RPM SAS 12GBPS Hard Drive refers to the rate at which data can be transferred between the hard drive and the host system. The SAS 12GBps interface of this hard drive supports a maximum data transfer speed of 12 Gb/s, which is faster than the previous generation of SAS 6GBps hard drives.
However, it’s important to note that the actual data transfer speed that can be achieved will depend on various factors such as the system’s hardware and software configurations, the number and type of hard drives in use, as well as the type and amount of data being transferred.
Also, the 7.2K RPM of the hard drive means that it spins at 7,200 revolutions per minute, which is slower than the 10K or 15K hard drives that are more common in enterprise environments. This means that the hard drive will have a slower access time and write operations. However, this also means that the hard drive will consume less power and generate less noise and heat, which can be beneficial in some environments.
Compatibility of 8TB Hard Drive
The compatibility of the 400-AMSC Dell 8TB 7.2K RPM SAS 12GBPS Hard Drive refers to its ability to work seamlessly with other hardware and software components in a system. This hard drive uses a SAS (Serial Attached SCSI) 12GBps interface, which is compatible with servers and systems that also have a SAS 12GBps host bus adapter (HBA). This hard drive also requires a system that supports SAS 12GBps hard drives and also has the proper power and cooling.
It is important to note that this hard drive is not compatible with systems that use a different interface, such as SATA (Serial ATA) or NVMe (Non-Volatile Memory Express). It is also not backward compatible with SAS 6GBps or SAS 3GBps systems.
Additionally, it’s recommended to check the system’s firmware, BIOS and driver version, as well as the hard drive’s firmware version, are up to date and compatible with each other to avoid any issues.
It is also recommended to check with the system vendor or consult the system’s documentation to ensure that the 400-AMSC Dell 8TB 7.2K RPM SAS 12GBPS Hard Drive is compatible with your specific system before purchasing.
Product Features
- Manufacturer : Dell
- Dell Part Number : 400-AMSC
- Product Type : Hard Disk Drive With Tray
Specifications
- Storage Capacity : 8 TB
- Interface : SAS-12GBPS
- Drive Dimensions : 3.5 Inch
Performance
- Spindle Speed : 7200 RPM
- Drive Transfer Rate : 1200 Mbps (external)
- Interfaces : 1 X Serial Attached Scsi – 12GBPS
- Compatible Bays : 1 X Internal – 3.5inch
Dimension And Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 Lbs
Compatibility
- poweredge R230
- poweredge R230XL
- poweredge R320
- poweredge R330xl
- poweredge R420
- poweredge R430
- poweredge R520
- poweredge R530
- poweredge R730
- poweredge R730XD
- poweredge R730XD XL
- poweredge R730Xl
- poweredge T320
- poweredge T330
- poweredge T420
- poweredge T430
- poweredge T440
- poweredge T620
- poweredge T630
- poweredge T640
- poweredge VRTX
- powervault Md3400