Description
Read Intensive SSD
The Dell 400-BKFB 7.68TB PCI-E 4.0 x4 NVMe TLC solid state drive (SSD) is a high-performance drive that is optimized for read-intensive workloads.
The drive uses the PCI Express 4.0 interface with x4 lane which allows for faster data transfer speeds compared to previous versions of PCI-E, this combined with NVMe protocol for low-latency fast data access.
The drive also features a very high storage capacity of 7.68TB which makes it suitable for data-intensive workloads such as data warehousing, analytics, and other read-heavy applications.
Additionally, it is a read-intensive drive, which means it is optimized for high read performance. This makes it well-suited for use cases where the drive will primarily be used to read data, rather than write data.
The drive is also built with TLC (Triple-Level Cell) NAND flash memory, which is less expensive and denser than other types of flash memory. TLC has lower endurance rating compared to other types of flash memory. This means that it can handle a lower number of program-erase (P/E) cycles before it becomes unreliable. However, as this drive is primarily optimized for read workloads, it may not reach its P/E limit as quickly as write-intensive drives.
In summary, the Dell 400-BKFB 7.68TB PCI-E 4.0 x4 NVMe TLC SSD is a high-performance, read-intensive drive that is well-suited for data-intensive workloads and environments where fast read performance is important. It’s high storage capacity and use of PCI-E 4.0 NVMe protocol and TLC flash memory makes it an attractive option for use cases with high storage needs.
More Information
The Dell 400-BKFB 7.68TB PCI-E 4.0 x4 NVMe TLC solid state drive (SSD) is a high-performance storage device that is designed to handle data-intensive workloads.
The drive uses the PCI Express 4.0 interface with x4 lane, which is the latest version of the PCI Express standard and it has faster data transfer speeds than previous versions of PCI-E. This provides high-speed communication between the drive and the system’s motherboard, allowing for faster data access.
The drive also uses the NVMe (Non-Volatile Memory Express) protocol, which is designed for solid state drives and enables low-latency, high-performance access to data stored on the drive. NVMe provides faster data access than SATA and SAS interface and it works best with PCI-E 4.0 x4 lane.
The drive has a very high storage capacity of 7.68TB, which makes it suitable for data-intensive workloads such as data warehousing, analytics, and other read-heavy applications.
Additionally, it is a read-intensive drive, which means it is optimized for high read performance. This makes it well-suited for use cases where the drive will primarily be used to read data, rather than write data.
The drive is also built with TLC (Triple-Level Cell) NAND flash memory, which is a type of flash memory that stores three bits per cell. This allows for higher storage densities at a lower cost compared to other types of flash memory, but has lower endurance rating, meaning it can handle less number of program-erase (P/E) cycles before it becomes unreliable. But as this drive is primarily optimized for read workloads, it may not reach its P/E limit as quickly as write-intensive drives.
In summary, the Dell 400-BKFB 7.68TB PCI-E 4.0 x4 NVMe TLC SSD is a high-performance storage device that uses the latest technology to provide fast data access and large storage capacity. It’s well-suited for data-intensive workloads and environments where fast read performance is important. It’s high storage capacity, use of PCI-E 4.0, NVMe protocol and TLC flash memory makes it an attractive option for use cases with high storage needs.
Drive Compatibility
The Dell 400-BKFB 7.68TB PCI-E 4.0 x4 NVMe TLC solid state drive (SSD) is compatible with systems that have a PCI Express 4.0 x4 slot and support the NVMe protocol.
One thing to check before you install the drive is the form factor. The 400-BKFB is a 2.5 inch drive, which is the most common form factor, it will fit most standard drive bays and it can be used in servers, storage systems, and other equipment.
Additionally, you need to ensure that your system’s BIOS and/or operating system support PCI Express 4.0 and NVMe protocol, otherwise the drive will not be able to work properly. NVMe protocol is supported by most modern operating systems, including Windows, Linux, and macOS.
It’s also important to check that your system meets the power and thermal requirements for the drive, as the high-performance nature of this drive may require more power than other storage solutions. And ensure that your system has proper cooling solutions to maintain the drive’s ideal operating temperature.
It’s worth checking with the vendor or the system’s documentation to ensure compatibility, or even consulting with an expert if you have doubts.
In summary, the Dell 400-BKFB 7.68TB PCI-E 4.0 x4 NVMe TLC SSD is compatible with systems that have a PCI Express 4.0 x4 slot, support the NVMe protocol, and meet the power and thermal requirements for the drive. And also, it’s important to make sure that the operating system and BIOS support PCI-E 4.0 and NVMe protocol.
General Information about this Dell 400-BKFB
- Manufacturer: Dell
- Model Number or SKU# 400-BKFB
- Type: Solid State Drive (SSD)
- Interface: PCI-Express
Technical Information of 7.68TB Solid State Drive
- Storage Capacity: 7.68TB
- Interface: PCI Express 4.0 X4 (Nvme)
- Features: Read Intensive
- Device Type: Solid State Drive – Internal
- Form Factor: U.2 15mm 2.5inch
Dimensions & Weight for PCI-Express SSD
- Height: 0.6 Inch
- Width: 2.7 Inch
- Depth: 3.9 Inch
- Weight: 0.35 LBS
Compatibility
- Poweredge Mx740c
- Poweredge Mx840c
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.