Dell A8171185 4GB (1x4GB) 2133mhz Pc4-17000 Ecc Registered 1.2v Cl15 Single Rank X8 DDR4 SDRAM 288-pin Rdimm Memory Module for Server | New Bulk Pack

The Dell A8171185 memory module is a DDR4 SDRAM 288-pin RDIMM designed specifically for use in servers. It has a capacity of 4GB and operates at a frequency of 2133MHz, which is also known as PC4-17000.

This memory module features ECC (Error-Correcting Code) technology, which can detect and correct single-bit errors that occur during data transfer. ECC is particularly important in server environments where data integrity and reliability are critical.

The Dell A8171185 memory module is also registered, which means that it has a buffer to improve signal integrity and reduce electrical load on the memory controller. This makes it an ideal choice for high-performance servers that demand stable and consistent memory performance.

The module has a voltage rating of 1.2 volts and operates at a latency of CL15. It is a single rank module, meaning that all of the memory chips are located on one side of the PCB, which is a design choice that can provide better performance in certain server configurations.

Comparison with other memory modules

When comparing the Dell A8171185 memory module with other memory modules for servers, several factors need to be considered, such as capacity, speed, latency, voltage, and reliability.

One of the primary advantages of the Dell A8171185 memory module is its ECC technology, which helps to detect and correct errors in data transfer. This feature is critical in server environments where data integrity and reliability are crucial. Many other memory modules for servers also offer ECC technology, but some may not, making the Dell A8171185 a more secure option.

Another key factor to consider when comparing memory modules for servers is the module’s speed and latency. The Dell A8171185 memory module operates at a frequency of 2133MHz with a CL15 latency, which is a relatively standard specification for DDR4 memory modules. However, some other memory modules may offer higher speeds or lower latencies, which could result in faster performance in some server configurations.

In terms of capacity, the Dell A8171185 memory module offers 4GB of memory, which is suitable for many server applications. However, some other memory modules may offer higher capacities, such as 8GB or 16GB, which may be necessary for more demanding applications.

Voltage is another essential consideration when comparing memory modules for servers. The Dell A8171185 memory module operates at a voltage of 1.2 volts, which is a relatively low voltage that can help to reduce power consumption and heat generation. Some other memory modules may operate at higher voltages, which could lead to higher power consumption and heat generation, which could affect the overall stability and reliability of the server.

Installation instructions for Dell A8171185 memory module

Installing the Dell A8171185 memory module in a server is a relatively straightforward process, but it’s important to follow the proper installation instructions to ensure that the module is installed correctly and operates reliably. Here are some general steps to follow:

• Before starting the installation process, ensure that the server is turned off and unplugged from the power source to avoid electrical damage.
• Open the server case and locate the memory slots. The memory slots are typically located near the CPU and are usually labeled.
• Remove any existing memory modules from the slots if necessary. Some servers may require that you install memory modules in pairs or follow specific installation rules. Check the server manual for specific instructions.
• Take the Dell A8171185 memory module out of its packaging and hold it by the edges, being careful not to touch the gold pins or any other components on the module.
• Align the notches on the memory module with the notches in the memory slot, ensuring that the module is oriented correctly.
• Gently push down on the memory module until it clicks into place. You should feel some resistance, but don’t apply too much force.
• Repeat the installation process for any additional memory modules.
• Close the server case and reconnect the power supply.
• Turn on the server and check the BIOS to ensure that the server recognizes the new memory module(s).
• If the server recognizes the new memory, the installation is complete. If the server does not recognize the new memory, double-check that the module is installed correctly and that it is compatible with the server.

It’s essential to follow proper ESD (Electrostatic Discharge) precautions when handling the memory module to avoid any damage from static electricity. Also, note that Dell may provide specific instructions for installing the Dell A8171185 memory module, so consult the manual or documentation that came with the module for additional guidance.