Description
More Feature
The drive is designed for read-intensive workloads, which means it is optimized for read operations, it generally has higher read speeds and lower write speeds than a drive that is optimized for write operations. This makes it well-suited for use-cases such as databases, analytics, and reporting tasks that require fast access to large amounts of data.
TLC (triple-level cell) refers to the type of NAND flash memory used in the device, which has a higher storage density but a lower endurance compared to MLC (multi-level cell) or SLC (single-level cell) NAND.
The hot-plug feature allows for easy maintenance and upgrades without the need to shut down the system. This feature allows the drive to be replaced or upgraded while the system is running. This makes it easier to swap out a drive that is failing or to upgrade to a larger drive without any interruption in service.
This product line by Dell is a series of drives that are designed to provide high performance and endurance for read-intensive workloads. These drives are built to provide high reliability, performance, and durability for different workloads, such as databases, analytics, and virtualization.
Drive Compatibility
The Dell 7.68TB SAS 12GBPS TLC SSD is a solid-state drive (SSD) with a storage capacity of 7.68 terabytes. It uses the SAS interface, which stands for Serial Attached SCSI, and supports a data transfer rate of 12 gigabits per second. The drive uses TLC (Triple-Level Cell) NAND flash memory, which stores three bits of data per cell, providing a higher storage density than other types of NAND flash memory, but with lower endurance and write performance.
In terms of compatibility, the drive is compatible with servers and storage arrays that support the SAS interface and have the appropriate physical form factor. It is also compatible with operating systems that support SAS-attached storage devices. The drive is not compatible with systems that use the SATA interface, as SAS and SATA are different types of interfaces.
To ensure compatibility, it’s important to check that the system in which the drive will be installed has a SAS controller that is compatible with the drive and has the appropriate number of SAS ports to connect the drive. The system should also meet the physical requirement for the drive, such as the form factor and power requirements.
In addition, it is important to check that the operating system, software, and any other relevant applications can recognize and support the drive and its capacity. Make sure that the drive’s performance meets your requirements before purchasing it. It is always a good idea to consult the manufacturer’s documentation or contact their support to ensure compatibility.
Drive Reliability
Dell SSDs are built with the highest quality materials and go through extensive testing, so the Dell 7.68TB SSD should have a good level of reliability. To know more about the specific drive you are interested in, you can check the technical datasheet provided by Dell, which should give you detailed information about its endurance, reliability, and performance.
Reliability of a Dell 7.68TB SSD (Solid State Drive) depends on various factors such as the quality of the specific drive, the workload it is subjected to, and the operating conditions it is used in.
Additionally, it’s important to monitor the temperature of the drive to ensure that it is operating within a safe temperature range. It’s also recommended to use the drive in a RAID configuration or use a backup solution to mitigate the risk of data loss due to drive failure.
It’s also important to consider the workload that the SSD will be subjected to and ensure that it has enough over-provisioning and wear-leveling algorithms to increase the reliability of the SSD and its lifespan.
General Information about this Dell GXKXX
- Manufacturer: Dell
- Part Number or SKU# GXKXX
- Product Type: Solid State Drive (SSD)
- Interface Type: SAS 12GBPS
Technical Information for 7.68TB Solid State Drive
- Storage Capacity: 7.68TB
- Nand Flash Memory Type: V-nand Tlc
- Form Factor: 2.5inch
- Data Transfer Rate: 1.2GPBS
- Features: Read-intensive Endurance, Advanced Format 512e
Dimensions & Weight of SAS 12GBPS SSD
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Performance of Triple Level Cell SSD
- Random Read: 385K IOPS
- Random Write: 45K IOPS
- Sequential Read: 2,097 MBPS
- Sequential Write: 1,573 MBPS
- Drive Transfer Rate: 1.2 GBPS (external)
- Min Terabytes Written: 14,016TB
Compatibility
- Poweredge C6420
- Poweredge R640
- Poweredge R740
- Poweredge R740xd
- Poweredge R7425
- Poweredge R840
- Poweredge R940
- Poweredge R940xa
- Powervault Nx3240
Benefits of SSD over spin drives
- More Durable: Feature a non-mechanical design of NAND flash mounted on circuit boards, and are more shock resistant.
- Faster: Faster data access, boot ups, file transfers, and an overall quicker computing experience than hard drives.
- Quieter: Run at near silent operation unlike loud, whirring hard disc drives.
- Lighter: Flash-based SSDs weigh considerably less.
- Cooler: SSDs require little power to operate, resulting in less heat output by your system.
- More Efficient: Consume less power at peak load.
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
