Description
Secure locking Mechanism for Data Protection
The VR858 Dell Genuine 2.5 SSD Hard Drive Caddy Tray is equipped with a secure locking mechanism that protects the stored data from potential physical damage or unauthorized access. This locking mechanism works by securely fastening the SSD drive into the caddy tray, preventing it from sliding out or getting dislodged. The caddy tray is designed to fit the Dell Storage SC5020, which is a storage server designed for data protection and high-performance storage solutions. The locking mechanism also provides physical protection for the SSD drive, reducing the risk of damage from impact, heat, or other environmental factors. Additionally, the caddy tray is designed with a metal housing that helps dissipate heat and protects the drive from physical damage. By incorporating a secure locking mechanism, the VR858 Dell Genuine 2.5 SSD Hard Drive Caddy Tray ensures the highest level of data protection and reliability for your storage solutions.
Maximizes Storage Capacity for 2.5 SSD
The VR858 Dell Genuine 2.5 SSD Hard Drive Caddy Tray is designed specifically for the Dell Storage SC5020 system. This caddy tray allows for the installation of a 2.5-inch SSD, which is a solid-state drive, into the Dell Storage SC5020. This maximizes the storage capacity for the system by providing an additional drive for data storage and retrieval. The use of an SSD drive results in improved system performance, as well as faster data access and retrieval times compared to traditional hard disk drives. The caddy tray is easy to install and provides a secure connection for the SSD drive, ensuring reliable data storage and protection. The VR858 Dell Genuine 2.5 SSD Hard Drive Caddy Tray is a cost-effective solution for expanding the storage capacity of the Dell Storage SC5020 system.
Installation for Streamlined Setup
- First, make sure to turn off the power to the server and unplug it to ensure the safety of the user.
- Locate the hard drive caddy in the server’s internal bay and remove it. To remove the caddy, gently pull it out of the bay.
- Take the new Dell Genuine 2.5 SSD Hard Drive Caddy and insert it into the internal bay. Make sure to secure it in place by clicking the tabs on the sides of the caddy into place.
- Connect the SATA cable to the caddy and plug it into the SATA port on the motherboard. Make sure the cable is connected securely.
- Take the SSD hard drive and attach it to the caddy by screwing in the screws. Make sure the drive is secure.
- Once the SSD hard drive is attached, connect the SATA power cable to the drive and plug it into the power supply.
- Turn on the power to the server and boot up the system. The server should automatically detect the new SSD hard drive and it will be ready for use.
- If the server does not detect the new drive, go into the BIOS and make sure the SATA controller is enabled. If it is not, enable it and save the changes.
- Once the server has detected the drive, the user can go into the operating system and format the drive as desired. The drive is now ready for use.
Note: The steps for installation may vary slightly depending on the server model, but the overall process is the same.
General Information
- Brand Name : Dell
- Part Number : VR858
- Sub-Type : Others Trays
- Type : Hot Swap Trays
