Description
Key Features and Specifications
The HP EH957B LTO-5 Ultrium 3000 SAS internal hot swap tape drive is a high-performance data storage solution for businesses and organizations that require reliable and efficient backup and archiving of large amounts of data. Some of its key features and specifications include:
- SAS interface: The drive uses a SAS (Serial Attached SCSI) interface for fast and reliable data transfer.
- LTO-5 technology: The drive uses LTO-5 (Linear Tape-Open 5) technology, which offers a storage capacity of up to 3 TB (compressed) and a data transfer rate of up to 280 MB/s (compressed).
- Hot swap capability: The drive can be easily replaced in a running system without interrupting operations, making it an ideal solution for businesses that require continuous data access.
- Encryption support: The drive supports hardware-based data encryption, which helps protect sensitive and confidential data from unauthorized access.
- Data compression: The drive uses data compression to increase the storage capacity and reduce the amount of data that needs to be written to the tape.
- Tape handling: The drive supports a wide range of tape media, including LTO-5, LTO-4, and LTO-3 tapes, and has a cartridge memory feature that allows for better media management.
- Warranty: The drive comes with a one-year limited warranty, with options for extended warranty and support.
- Capacity: 3TB (compressed)
- Transfer rate: 280 MB/s (compressed)
- Data compression: 2:1
- Encryption: AES 256-bit hardware-based data encryption
- Tape handling: LTO-5, LTO-4, and LTO-3 tapes
Install and Set up
The EH957B HP LTO-5 Ultrium 3000 SAS Internal Hot Swap Tape Drive is a high-performance tape drive that can be installed and set up in a few simple steps. Here is a general overview of the process:
- Unpack the tape drive and any included accessories, such as the power cord and SAS cable.
- Connect the SAS cable to the tape drive and the SAS controller on the server.
- Connect the power cord to the tape drive and an electrical outlet.
- Turn on the server and boot into the operating system.
- Install any necessary drivers or software for the tape drive. This may include a tape backup software program or a specific driver for the tape drive.
- Configure the tape drive in the server’s BIOS or RAID controller. This may include setting the tape drive as the primary boot device or configuring the tape drive as a RAID device.
- Test the tape drive to ensure it is working properly. This may include running a backup job or performing a diagnostic test.
- Configure backup jobs and schedules as necessary.
It is important to refer to the manufacturer’s instructions for specific details and any additional steps that may be required for your particular server configuration.
Maintaining and Troubleshooting
The EH957B HP LTO-5 Ultrium 3000 SAS Internal Hot Swap Tape Drive is a high-performance, reliable tape drive that is designed for use in enterprise-level data storage systems. It uses LTO-5 tape technology, which provides a capacity of up to 3TB per cartridge and a transfer rate of up to 140MB/s. The drive is designed for hot-swapping, which means that it can be replaced or serviced without shutting down the system.
To maintain the EH957B HP LTO-5 Ultrium 3000 SAS Internal Hot Swap Tape Drive, it is recommended to regularly check and clean the drive heads, as well as replace the drive’s cleaning cartridge when necessary. Additionally, it is important to keep the drive’s firmware up to date to ensure optimal performance and compatibility with other system components.
Troubleshooting the EH957B HP LTO-5 Ultrium 3000 SAS Internal Hot Swap Tape Drive can typically be done by checking for common issues such as poor connectivity, hardware conflicts, or outdated firmware. If the drive is not functioning properly, it may be necessary to replace it or perform a firmware update. Additionally, checking the system’s event logs or running diagnostic tests can help to identify any specific issues that may be causing problems.
In case of any technical difficulties, HP provides a comprehensive support and troubleshooting guide that covers various common issues and their solutions. It is recommended to consult the guide before attempting any repairs or replacements to ensure that the proper steps are taken to resolve the problem.
General Information HP EH957B
- Manufacturer: Hewlett-Packard
- MPN: EH957B
- Type: Tape Drive
- Tape Drive Type: Tape Storage
- SKU: EH957B#ABA
- Tape Type : LTO – 5
- Native Drive Capacity : 1.50TB
- Enclosure Type : Internal
Technical Features EH957B
- Native Data Transfer Rate : 140 MBPS
- Compressed Data Transfer Rate : 280 MBPS
- Compressed Drive Capacity : 3Tb
- Interface Type : 6 GB/SEC SAS Host Interface
- Buffer Size : 256 MB
- Encryption Capability : AES 256-Bit
- Form Factor : 5.25 X 1/2 H Internal
Dimensions & Weight
- Width: 5.7 Inch
- Depth: 8.1 Inch
- Height: 1.6 Inch
- Weight: 3.2 Lbs
