EMC 5052112 7.68TB SAS 12GBPS 2.5inch Enterprise Internal Solid State Drive | Refurbished

The EMC 5052112 is a 7.68TB SAS (Serial Attached SCSI) solid-state drive designed for enterprise-level use. It has a 2.5-inch form factor and a 12Gbps SAS interface, which allows for fast data transfer speeds and reliable performance.

In terms of performance, this drive has impressive read and write speeds, with sequential read speeds of up to 1,500 MB/s and sequential write speeds of up to 1,000 MB/s. This makes it well-suited for demanding workloads that require fast access to large amounts of data, such as big data analytics, virtualization, and high-performance computing.

As for endurance, the EMC 5052112 is designed to withstand heavy workloads over an extended period of time. It has a mean time between failures (MTBF) rating of 2 million hours, which indicates that it can be relied on to perform consistently over a long period of time. Additionally, it supports power loss protection and advanced data integrity features to help prevent data loss or corruption in the event of power outages or other disruptions.

The installation and configuration of the EMC 5052112 7.68TB SAS 12Gbps 2.5-inch enterprise internal solid-state drive (SSD) can vary depending on the specific system it will be installed in. However, here are some general steps that may help guide the process:

• Check compatibility: Ensure that the EMC 5052112 SSD is compatible with the system you plan to install it in. Check the system’s documentation or manufacturer’s website for compatibility information.
• Power off the system: Before installing the drive, power off the system and unplug it from the power source. This is an important safety measure to avoid any electrical shock or damage to the drive or system.
• Locate the drive bay: Locate the drive bay where you plan to install the EMC 5052112 SSD. This will typically be a 2.5-inch drive bay, and it may be located on the motherboard or on a separate drive cage.
• Insert the drive: Carefully insert the EMC 5052112 SSD into the drive bay. Make sure that the drive is properly aligned and seated in the bay. Secure the drive using the mounting screws or brackets provided.
• Connect the SAS cable: Connect the SAS cable to the SAS interface on the EMC 5052112 SSD and to the corresponding SAS interface on the motherboard or RAID controller. Make sure the cable is securely connected.
• Power on the system: Once the drive is installed and connected, power on the system and allow it to boot up.
• Configure the drive: Depending on the system configuration, you may need to configure the EMC 5052112 SSD before it can be used. This may involve initializing the drive, partitioning and formatting it, or configuring RAID settings.
• Verify operation: Once the EMC 5052112 SSD is installed and configured, verify that it is operating correctly by checking the system’s drive status or running diagnostic tests.

It is important to follow the specific instructions provided in the system’s documentation or by the drive manufacturer to ensure proper installation and configuration of the EMC

The EMC 5052112 is a 7.68TB SAS (Serial Attached SCSI) 12Gbps enterprise internal solid-state drive (SSD) designed for high-performance storage applications. It comes in a small form factor of 2.5 inches, making it ideal for use in compact server and storage systems.

The drive uses multi-level cell (MLC) NAND flash memory and features a 12Gbps SAS interface, which provides fast data transfer rates and high reliability. The drive is also designed to support up to 10 full drive writes per day (DWPD) endurance rating, which means it can handle frequent read and write operations with ease.

The EMC 5052112 has a durable and robust design, with a high level of shock and vibration resistance. This makes it suitable for use in rugged environments where reliability is crucial. The drive also features advanced error correction and wear leveling technologies, which help to ensure data integrity and extend the lifespan of the drive.

In terms of power consumption, the EMC 5052112 is designed to operate efficiently and with low power consumption, making it a cost-effective choice for enterprise applications. It also supports power loss protection, which ensures that data is not lost in the event of an unexpected power outage.