Description
Installation and Configuration
Installation and configuration of the HP Dual Port 10GBe Server Adapter can be a complex process, but with the right steps and guidelines, it can be completed successfully. In this section, we will discuss the steps involved in the installation and configuration of the HP Dual Port 10GBe Server Adapter.
Before we proceed, it is important to note that the steps for installation and configuration may vary depending on the server and operating system you are using. Therefore, it is recommended to consult the product documentation and support resources for your specific system.
- Check System Compatibility: The first step is to check if your server and operating system are compatible with the HP Dual Port 10GBe Server Adapter. Refer to the product documentation or consult with HP support to ensure that your system meets the minimum requirements for the adapter.
- Prepare the Server: Before installing the adapter, ensure that the server is powered off and unplugged from the power source. Remove the server cover and locate an available PCIe slot for the adapter. Verify that the slot is compatible with the adapter and is not being used by any other device.
- Install the Adapter: Gently insert the adapter into the PCIe slot, making sure it is securely seated. Tighten the retention screw to secure the adapter in place.
- Connect the Network Cables: Connect the network cables to the adapter ports. The HP Dual Port 10GBe Server Adapter has two ports, labeled Port 1 and Port 2. Connect the cables to the appropriate ports based on your network configuration.
- Boot the Server and Install Drivers: Once the adapter is physically installed, power on the server and boot into the operating system. Download and install the appropriate drivers for your operating system from the HP website or installation CD that came with the adapter.
- Configure the Adapter: After the drivers are installed, open the network adapter settings in your operating system. Configure the adapter with the appropriate network settings, such as IP address, subnet mask, gateway, and DNS server.
- Verify the Adapter Settings: Verify that the adapter is working properly by checking the network connectivity and verifying the adapter settings. You can use network diagnostic tools or ping commands to test the connection.
Performance and Reliability
The HP Dual Port 10GBe Server Adapter is designed to provide high performance and reliability for demanding server applications. Here are some key factors that contribute to the adapter’s performance and reliability:
- Bandwidth: The HP Dual Port 10GBe Server Adapter provides 20 Gbps of total bandwidth, which allows for faster data transfer rates and reduces network congestion. This is especially important for high-traffic server applications that require fast and reliable data transfer.
- Low Latency: The adapter has low latency, which means that data packets are delivered quickly and with minimal delay. This is important for applications that require real-time data transfer, such as video streaming, online gaming, and financial transactions.
- Scalability: The HP Dual Port 10GBe Server Adapter is designed to be scalable, which means it can easily handle increased network traffic and bandwidth requirements. This is important for applications that are expected to grow and evolve over time.
- Quality of Service (QoS): The adapter has built-in Quality of Service (QoS) features that allow administrators to prioritize network traffic based on application requirements. This ensures that critical applications receive the necessary network resources and bandwidth.
- Reliability: The HP Dual Port 10GBe Server Adapter is built with high-quality components and undergoes rigorous testing to ensure reliability and durability. This means that it is less likely to fail or cause downtime, which is critical for mission-critical applications.
Compatibility
The HP Dual Port 10GBe Server Adapter is compatible with a wide range of servers and operating systems. Here are some key points to keep in mind regarding the adapter’s compatibility:
- Server Compatibility: The HP Dual Port 10GBe Server Adapter is compatible with HP ProLiant Gen8 and Gen9 servers, as well as selected third-party servers. It is important to check the product documentation to ensure compatibility with your specific server model.
- Operating System Compatibility: The adapter is compatible with a wide range of operating systems, including Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and VMware ESXi. It is important to check the product documentation to ensure compatibility with your specific operating system version.
- Driver Support: The adapter requires specific drivers to function properly, and it is important to ensure that the appropriate driver version is installed for your operating system. HP provides drivers for the adapter on their website, as well as on the installation CD that comes with the adapter.
- Network Compatibility: The HP Dual Port 10GBe Server Adapter is compatible with a wide range of network topologies, including Ethernet, Fibre Channel over Ethernet (FCoE), and iSCSI. It is important to ensure that your network infrastructure is compatible with the adapter and that you have the necessary network cables and switches.
- Firmware Compatibility: The adapter may require firmware updates to ensure compatibility with the latest servers, operating systems, and network technologies. It is important to check for firmware updates on HP’s website and to follow the instructions carefully when updating the firmware.
General Information about the HPE 581201-B21
- Device Type : Network Adapter – 2 Ports
- Interface (Bus) Type : Pci Express 2.0 X8
- Pci Specification Revision : Pcie 2.0
Networking
- Connectivity Technology : Wired
- Data Link Protocol : 10 Gigabit Ethernet
Features
- Ipv6 Support, Tcp/Ip Offloading, Quality Of Service (Qos), Jumbo Frames Support
Compliant Standards
- IEEE 802.1q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.3ae, IEEE 802.3ap, IEEE 802.3az