Description
Performance Metrics
The HP 605858-B21 is a 160GB SATA-II Multi-Level Cell (MLC) Solid State Drive (SSD) designed for use in enterprise environments. The performance metrics of this SSD are as follows:
- Sequential Read Speed: Up to 250 MB/s
- Sequential Write Speed: Up to 70 MB/s
- Random Read Speed (4KB): Up to 6,500 IOPS
- Random Write Speed (4KB): Up to 3,500 IOPS
These performance metrics indicate that the HP 605858-B21 SSD is optimized for read-heavy workloads, such as boot drives and application loading. Its sequential read speed of up to 250 MB/s is quite fast, which means that large files and applications can be loaded quickly. However, its sequential write speed of up to 70 MB/s is relatively slow, which means that write-heavy workloads may experience slower performance.
The HP 605858-B21 SSD’s random read speed of up to 6,500 IOPS and random write speed of up to 3,500 IOPS are also relatively modest, which means that its performance in small block random read/write workloads may be less than optimal.
Endurance and Durability
The endurance and durability of a Solid State Drive (SSD) are important factors to consider when evaluating its suitability for enterprise use. The HP 605858-B21 is a 160GB SATA-II Multi-Level Cell (MLC) Solid State Drive designed for enterprise environments.
The endurance of an SSD is typically measured in terms of the number of program/erase (P/E) cycles it can perform before the drive’s cells wear out. The HP 605858-B21 SSD has an endurance rating of up to 7.2 Petabytes Written (PBW), which means it can write up to 7.2 PB of data over its lifetime. This endurance rating indicates that the HP 605858-B21 is suitable for use in applications with moderate write workloads.
In terms of durability, the HP 605858-B21 SSD is built with enterprise-grade components and is designed to withstand the demands of enterprise environments. It has a Mean Time Between Failures (MTBF) rating of 2 million hours, which indicates its reliability and durability. This rating means that the SSD is expected to work reliably for an average of 2 million hours before a failure occurs.
The HP 605858-B21 SSD also features wear leveling technology, which helps to evenly distribute data writes across the drive to prevent any particular cell from wearing out faster than others. This technology helps to prolong the life of the SSD and maintain its performance over time.
Installation and Configuration
The installation and configuration of the HP 605858-B21 160GB SATA-II Multi-Level Cell (MLC) Solid State Drive (SSD) is similar to that of a traditional hard drive. Here are the steps to follow:
- Turn off the computer or server where you will be installing the HP 605858-B21 SSD.
- Open the computer or server case to access the drive bays.
- Identify an available 2.5-inch drive bay in which to install the HP 605858-B21 SSD.
- Insert the SSD into the drive bay and secure it using the appropriate mounting screws.
- Connect the SATA data cable to the SSD and the motherboard.
- Connect the SATA power cable to the SSD.
- Close the computer or server case.
- Turn on the computer or server.
Once the hardware installation is complete, you will need to configure the HP 605858-B21 SSD in the operating system. Here are the steps to follow:
- Boot up the computer or server and enter the BIOS setup utility.
- Verify that the SSD is detected in the BIOS and that the system recognizes its capacity.
- Save the changes and exit the BIOS setup utility.
- Boot into the operating system and navigate to the Disk Management utility.
- Initialize the SSD as a new disk and create a partition if necessary.
- Format the SSD with a file system that is supported by the operating system.
- Assign a drive letter to the SSD so that it can be accessed like any other drive.
After completing these steps, the HP 605858-B21 SSD should be ready for use. It is important to note that the exact steps for configuring the SSD may vary depending on the operating system and the configuration of the system in which it is installed. It is always recommended to consult the manufacturer’s documentation or seek the assistance of a qualified technician if you are unsure of the installation or configuration process.
General Information
- Manufacturer: HP
- Part Number or SKU# 605858-B21
- Interface: SATA 3GBPS
Technical Information
- Storage Capacity : 160GB
- Technology : Multi-level Cell (mlc) X-25m Slimline
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
