Description
Technical Specifications of HP
The technical specifications of the HP System Board 608865-001 for the Proliant DL180 G6 System Board are as follows:
- Chipset: Intel 5520 Chipset
- Processor Support: Intel Xeon 55xx and 56xx series processors with up to 8 cores
- Memory Support: Up to 192GB of DDR3 memory using 18 DIMM slots
- Expansion Slots: 2 PCI Express Gen 2 (x8) and 1 PCI Express Gen 2 (x4)
- Network Connectivity: 4 Gigabit Ethernet ports (Broadcom BCM5716)
- Storage: 6 SATA ports (3 Gb/s)
- Power Supply: 1+1 Redundant Power Supply
- Operating System Support: Microsoft Windows Server 2008, Red Hat Enterprise Linux, and VMware vSphere
- Management: Integrated Lights-Out 2 (iLO 2) Advanced Pack
- Dimensions: 17.24 x 16.18 x 1.66 in.
- Weight: 8.16 lb.
Please note that these specifications may be subject to change and vary depending on the manufacturer and vendor. It is recommended to consult the product documentation or reach out to the manufacturer for the latest and accurate specifications.
Installation and Configuration
Installing the 608865-001 HP System Board for the Proliant DL180 G6 System Board requires careful planning and preparation. Before starting the installation process, make sure that you have all the necessary tools and components, such as screwdrivers, anti-static wristbands, and thermal grease. Here are the steps to follow:
- Prepare the Work Area: Ensure that the work area is clean and well-lit, and place the system board on an anti-static surface.
- Ground Yourself: Before handling the system board, ground yourself by wearing an anti-static wristband or touching a grounded metal object.
- Remove the Old System Board: Locate the existing system board and unscrew it from the chassis. Disconnect any cables or components connected to it.
- Install the New System Board: Line up the new system board with the mounting points in the chassis and securely screw it into place.
- Connect Cables and Components: Reattach all the cables and components that were disconnected from the old system board.
- Apply Thermal Grease: Apply a thin layer of thermal grease to the processor and spread it evenly with a thermal grease spreader.
- Close the Chassis: Close the chassis and secure all screws and fasteners.
Troubleshooting and Maintenance Tips
Troubleshooting and maintenance are important aspects of any computer component, including the HP System Board 608865-001 for the Proliant DL180 G6 system board. Here are some tips to help you troubleshoot and maintain this system board:
- Power Issues: If the system board is not receiving power, check the power supply, cable connections, and the power switch.
- Error Messages: If the system displays error messages, refer to the user manual or the HP website for troubleshooting tips.
- Hardware Issues: If hardware components are not functioning properly, replace them or contact HP support for assistance.
- Driver Updates: Keep drivers updated to avoid compatibility issues and improve performance.
- Regular Maintenance: Clean the system board periodically with a soft cloth to prevent dust buildup and potential damage to components.
- Avoid Overheating: Ensure proper ventilation to prevent overheating, which can cause damage to the system board and other components.
- Protect from Electrical Surges: Use surge protectors to prevent electrical surges from damaging the system board and other components.
- Professional Repair: If the system board is damaged or not functioning properly, have a professional repair it to avoid further damage.
By following these troubleshooting and maintenance tips, you can extend the life of your HP System Board 608865-001 and keep your Proliant DL180 G6 system board running smoothly.
Product Details
- Manufacturer: HP
- Manufacturer Part Number: 608865-001
- Manufacturer Type: Motherboard
- Manufacture Sub-Type: Server Board
- Product Name: ProLiant
- Manufacturer HP Systems, Inc
Performance
- HP System Board For Proliant Dl180 G6 System Board.
