Description
Features and Specifications
The HPE Ethernet 1GB 2-port 332t Network 100Mb LAN, GigE Adapter (model number 615732-B21) is a network adapter that can be installed in a computer or server to add two Ethernet ports for connecting to a network.
Features:
- Two Ethernet ports: This adapter has two ports that can be used to connect to a network, allowing for multiple connections at once.
- 1 GB data transfer rate: This adapter can transfer data at a rate of 1 Gbps (gigabit per second), which is faster than the standard 100 Mbps (megabit per second) speed of a 100Mb LAN connection.
- 100Mb LAN compatibility: This adapter is also compatible with 100Mb LAN connections, allowing for compatibility with older network infrastructure.
- GigE compatibility: The adapter is compatible with GigE (Gigabit Ethernet) networks, which have a data transfer rate of 1 Gbps.
- Advanced Features: The adapter supports advanced features such as VLAN tagging, jumbo frames, and flow control.
Specifications:
- Form Factor: PCI Express x4
- Data Transfer Rate: 1 Gbps (gigabit per second)
- Network Protocols: TCP/IP, UDP/IP, IPv4, IPv6
- Operating Temperature: 32 to 131°F (0 to 55°C)
- Operating Humidity: 10 to 90% non-condensing
- Dimensions: 6.6 x 2.5 x 0.8 inches (167 x 63 x 20 mm)
- Weight: 0.2 lbs (90 grams)
Installation and Setup Instructions
- Begin by installing the 615732-B21 HPE Ethernet 1GB 2-port 332t Network 100Mb LAN, GigE Adapter into an available PCI Express slot on your server or desktop computer.
- Once the adapter is securely seated in the slot, connect the cables from the network switch or router to the adapter’s ports.
- Power on your computer and wait for it to boot up.
- Open the device manager on your computer by going to the control panel and searching for “Device Manager.”
- Locate the 615732-B21 HPE Ethernet 1GB 2-port 332t Network 100Mb LAN, GigE Adapter in the list of devices and right-click on it. Select “Update Driver Software.”
- Choose “Browse my computer for driver software” and navigate to the location where you have saved the driver software for the adapter.
- Follow the prompts to complete the driver installation.
- Once the driver is installed, go to the network and sharing center on your computer and configure the network settings for the adapter.
- Test the connection by accessing the internet or a network resource to ensure that the adapter is working properly.
- Once you have confirmed that the adapter is working, you can now start using it to connect to the network and share files and resources.
Troubleshooting and Maintenance
Troubleshooting and maintenance for the 615732-B21 HPE Ethernet 1GB 2-port 332t Network 100Mb LAN, GigE Adapter involves several steps. These steps include:
- Verifying the connection: Ensure that the adapter is properly connected to the network and that all cables are securely plugged in.
- Checking the status lights: The adapter has several status lights that indicate the status of the connection. If the lights are not functioning properly, it could indicate a problem with the adapter.
- Updating the drivers: Make sure that the adapter drivers are up to date by checking for updates on the HPE website.
- Checking for compatibility issues: Ensure that the adapter is compatible with the operating system and the network infrastructure.
- Testing the connection: Run a diagnostic test to check the performance of the adapter and identify any issues.
- Cleaning the adapter: Use a dry cloth to clean the adapter and remove any dust or debris that may have accumulated.
- Rebooting the system: If all else fails, try restarting the system to see if that resolves the issue.
- Replacing the adapter: If the adapter is still not working after trying all of the above steps, it may be necessary to replace it with a new one.
Regular maintenance of the adapter, such as cleaning and updating the drivers, can help prevent issues from occurring and ensure smooth operation.
General Information
- Manufacturer: HPE
- MPN: 615732-B21
- Type: Network adapter
- Spare Part: 616012-001
- SKU:615732-B21
- Form Factor: Plug-in card-low profile
- Interface (Bus) Type: PCI Express 2.0 x1
- PCI Specification Revision: PCIe 2.0
Dimensions
- Depth: 4.4 inch
- Height: 2.4 inch
Networking
- Ports: Gigabit Ethernet x 2
- Connectivity Technology: Wired
- Cabling Type: Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
- Data Link Protocol: 10Mb LAN, 100Mb LAN, GigE
- Data Transfer Rate: 1 Gbps
- Status Indicators: Link activity
- Features: Jumbo Frames support, PXE support, Large Send Offload (LSO)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1as, IEEE 802.3az
Processor/Memory
- Processor: 1 x BCM5720 – Broadcom
Expansion / Connectivity
- Interfaces: 2 x 1000Base-T – RJ-45
- Compatible Slots: 1 x PCI Express 2.0 x1
Miscellaneous
- Included Accessories: Low-Profile Bracket, Full-Height Bracket
- Compliant Standards: VCCI Class B ITE, EN 61000-3-2, EN55022, EN 61000-3-3, FCC Part 15 B, WEEE, RoHS
System Requirements
- OS Required: SunSoft Solaris 10, Microsoft Windows HPC Server 2008 SP2, Microsoft Windows Server 2008 R2 SP1, Red Hat Enterprise Linux 6.1, Red Hat Enterprise Linux 5.7
Environmental Parameters
- Min Operating Temperature: 32 °F
- Max Operating Temperature: 131 °F
- Humidity Range Operating: 10 – 90% (non-condensing)
Compatibility Information
- HP ProLiant DL160 Gen8, DL160 Gen8 Base, DL160 Gen8 Entry, DL160 Gen8 Performance, DL360e Gen8, DL360e Gen8 Base, DL360e Gen8 Entry, DL360e Gen8 Performance, DL360p Gen8, DL360p Gen8 Base, DL360p Gen8 CMS, DL360p Gen8 Entry, DL360p Gen8 High Performance, DL380e Gen8, DL380e Gen8 Base, DL380e Gen8 Entry, DL380e Gen8 High Performance, DL380e Gen8 Storage, DL380p Gen8, DL380p Gen8 Base, DL380p Gen8 Entry, DL380p Gen8 High Performance,
- DL380p Gen8 Special, DL385p Gen8, DL385p Gen8 Dedicated Workload, DL385p Gen8 Entry, DL385p Gen8 Maximized Consolidation, DL385p Gen8 Storage, DL560 Gen8, DL560 Gen8 Base, DL560 Gen8 Entry, DL560 Gen8 Performance, ML310e Gen8, ML310e Gen8 Base, ML310e Gen8 Entry, ML310e Gen8 Performance, ML310e Gen8 v2, ML350e Gen8, ML350e Gen8 Base, ML350e Gen8 Entry, ML350e Gen8 Performance, ML350e Gen8 v2, ML350e Gen8 v2 Base, ML350p Gen8, ML350p Gen8 Base, ML350p Gen8 Entry, ML350p Gen8 Performance, SL230s Gen8 1U Left Half Width Tray, SL230s Gen8 1U Right Half Width Tray,
- SL230s Gen8 Base 1U Left Tray Server, SL230s Gen8 Base 1U Right Tray Server, SL250s Gen8 2U Left Half Width Tray, SL250s Gen8 2U PCIe Gen3 Left Tray, SL250s Gen8 2U PCIe Gen3 Right Tray, SL250s Gen8 2U Right Half Width Tray, SL250s Gen8 Base 2U Left Half Width Tray, SL250s Gen8 Base 2U Right Half Width Tray, SL270s Gen8 1U Left Half Width Tray, SL270s Gen8 1U Right Half Width Tray, SL270s Gen8 Base 4U Left Half Width Tray, SL270s Gen8 Base 4U Right Half Width Tray, SL270s Gen8 SE 4U Left Tray, SL270s Gen8 SE 4U Right Tray
