Description
Features and benefits of the HP Flexfabric 2 Ports Adapter
The HP FlexFabric 10Gb 2-port 554FLB FIO Adapter (part number 647584-001) is a network adapter designed for use in HP ProLiant servers and blades. Some of its features include:
- 10 Gigabit Ethernet (10 GbE) connectivity: This adapter provides high-speed network connections for data transfer and communication.
- FlexFabric technology: This allows the adapter to support multiple protocols, including Fibre Channel over Ethernet (FCoE) and iSCSI, making it suitable for a variety of networked storage and data center applications.
- Dual-port design: This adapter has two ports, which can be used for redundancy and load balancing.
- Fibre Channel over Ethernet (FCoE) capable: This allows the adapter to support both Fibre Channel and Ethernet protocols, providing a unified network for data and storage traffic.
- iSCSI capable: The adapter can support iSCSI protocol which can provide block-level access to data over an IP network
- Advanced features: The adapter supports advanced features such as Quality of Service (QoS) and Data Center Bridging (DCB).
- High Performance: The adapter provides high-performance 10 GbE networking for increased bandwidth and low latency for HP ProLiant servers and blades.
- Low power Consumption: The adapter is designed to consume low power which helps in reducing energy costs and improving energy efficiency.
Management and Monitoring
Management and monitoring of the 647584-001 HP Flexfabric 10GB 2-Port 554flb Fio Adapter can be done through the use of various software and hardware tools.
- HPE Intelligent Provisioning: This is a built-in tool that allows for the management and monitoring of the adapter’s firmware, BIOS, and other system settings. It can also be used to update the adapter’s firmware and drivers.
- HPE Systems Insight Manager (SIM): This software allows for the monitoring and management of the adapter’s performance and network traffic. It can also be used to generate reports and alerts for potential issues.
- HPE Network Advisor: This software allows for the management and monitoring of the adapter’s network connectivity, including the ability to troubleshoot and resolve issues.
- HPE iLO (Integrated Lights-Out) Management: This is a remote management tool that allows for the monitoring and management of the adapter’s power, temperature, and other system parameters.
- SNMP (Simple Network Management Protocol): This protocol allows for the monitoring and management of the adapter’s network traffic and performance through the use of SNMP-compliant software or hardware tools.
Troubleshooting and Support
Troubleshooting and support for the 647584-001 HP Flexfabric 10GB 2-Port 554flb Fio Adapter can involve several different steps and procedures depending on the specific issue being encountered.
- Check the connectivity: Verify that the adapter is properly connected to the host system and that all cables are securely connected. Check for any loose or damaged cables.
- Check the driver and firmware: Make sure that the latest driver and firmware for the adapter are installed on the host system.
- Check the network configuration: Verify that the network settings on the host system are configured correctly for the adapter. Make sure that the IP address, subnet mask, and gateway are set correctly.
- Check for hardware issues: If the adapter is not functioning properly, it may be due to a hardware issue. Check for any physical damage to the adapter and make sure that it is seated properly in the host system.
- Check for software conflicts: If the adapter is not functioning properly, it may be due to a software conflict. Check for any other software that may be conflicting with the adapter and try disabling or uninstalling it.
- Contact HP support: If the problem persists after trying the above steps, contact HP support for further assistance. Provide them with the model number and serial number of the adapter, as well as a detailed description of the issue.
General Information about the HPE 647584-001
- Manufacturer: HP
- Model Number or SKU# 647584-001
- Type : Networking
- Adapter -Type : Network Adapter – 2 Ports
- Form Factor : Plug-In Card
- Interface (Bus) Type : Pci Express 2.0 X8
- Pci Specification Revision : Pcie 2.0
- Ports Qty : 2 Ports
- Processor : 1 – Emulex
- Ram : 128 MB
Networking
- Connectivity Technology : Wired
- Cabling Type : Ethernet 10G Base-Kr, Ethernet 10G Base-Kx4
- Data Link Protocol : Gigabit Ethernet, 10 Gigabit Ethernet, Fibre Channel Over Ethernet (Fcoe)
- Data Transfer Rate : 10 GBPS
Expansion / Connectivity
- Interfaces : 2 X Network – 10GB Ethernet / 1GB Ethernet
- Compatible Slots : 1 X Flexiblelom
