Description
Design and Construction
The HP 691864-B21 200GB SATA 6GBPS SSD is an enterprise-class solid-state drive designed for high performance and reliability in demanding data center environments. It is built using advanced flash memory technology and a robust design that is designed to provide reliable operation and fast performance.
The drive uses the standard 2.5-inch form factor, which is a common size for enterprise-class SSDs. It is built using MLC (Multi-Level Cell) flash memory, which is a type of memory that can store multiple bits of data per cell. This allows MLC memory to offer higher storage densities and lower cost per gigabyte than other types of flash memory.
The HP 691864-B21 SSD is designed to be compatible with the SATA 6Gbps (SATA III) interface, which provides fast data transfer rates and high throughput. It can achieve up to 550 MB/s sequential read speeds and up to 500 MB/s sequential write speeds, making it suitable for high-performance computing, virtualization, and other demanding workloads.
The drive also includes advanced features such as power loss protection, which helps to prevent data loss in the event of a power failure or other unexpected interruption. It also includes advanced error correction and wear-leveling algorithms, which help to ensure data integrity and extend the lifespan of the drive.
Reliability and Durability
The HP 691864-B21 200GB SATA 6GBPS SSD is designed to provide high reliability and durability in demanding enterprise environments. The drive uses advanced flash memory technology and a robust design to ensure consistent performance and long-term reliability.
One of the key features that helps to ensure the reliability of the HP 691864-B21 SSD is its use of MLC (Multi-Level Cell) flash memory. MLC memory is known for its high endurance and reliability, making it well-suited for use in enterprise-class SSDs that need to withstand heavy workloads and constant use.
The HP 691864-B21 SSD also includes advanced error correction and wear-leveling algorithms, which help to ensure data integrity and extend the lifespan of the drive. These algorithms help to prevent data corruption and minimize the risk of drive failures due to wear and tear.
In addition to these features, the HP 691864-B21 SSD includes power loss protection, which helps to prevent data loss in the event of a power failure or other unexpected interruption. This feature helps to ensure that data is always available, even in the event of a system failure or other unforeseen event.
Installation and Configuration
The installation and configuration process for the HP 691864-B21 200GB SATA 6GBPS SSD will depend on the specific system it is being installed in. However, here are some general steps that can be followed:
- Shutdown the system: Before installing the new SSD, shut down the system and unplug it from the power source.
- Open the chassis: Open the chassis of the system to access the drive bays. Depending on the system, this may involve removing screws or clips that hold the case in place.
- Locate the drive bay: Locate an empty drive bay where the new SSD can be installed. If all drive bays are currently in use, you may need to remove an existing drive to free up a slot.
- Connect the SSD: Connect the SATA data cable to the SSD and the SATA power cable to the power connector on the SSD.
- Mount the SSD: Mount the SSD in the drive bay using screws or clips provided with the system.
- Close the chassis: Close the chassis of the system and secure it in place using screws or clips.
- Configure the system: Once the new SSD is installed, configure the system to recognize it as a new storage device. This may involve accessing the BIOS settings and configuring the system to boot from the new SSD, or using disk management tools to partition and format the drive.
- Install the operating system: If the new SSD is intended to be the primary boot drive, install the operating system and any other required software on it.
General Specification
- Manufacturer: HP
- Part Number or SKU#: 691864-B21
- Product Type: Solid State Drive(SSD)
Key Feature
- Storage Capacity: 200 GB
- Drive Interface: SATA 6GBPS
- Form Factor: 2.5inch
- Enclosure: Internal
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
