Description
Overview of HPE 32GB RAM
“Product Overview” is a section that provides a general introduction and summary of the main features and benefits of the 726718-32G HPE 32GB 2133mzh Pc4-17000 Cas-15 Ecc Reg DDR4 SDRAM 288-Pin Ram. It should give the reader a quick understanding of what the product is, what it does, and why it is useful.
In the specific case of the 726718-32G HPE 32GB 2133mzh Pc4-17000 Cas-15 Ecc Reg DDR4 SDRAM 288-Pin Ram, the overview could include information such as:
- This is a high-performance memory module designed for use in servers and other high-end computing systems.
- It has a capacity of 32GB, which allows for large amounts of data to be stored and processed.
- The memory operates at a speed of 2133mhz, which is faster than standard DDR4 memory and allows for faster data transfer and processing.
- The module is also equipped with Error Correction Code (ECC) and Registered (Reg) technologies, which provide additional data integrity and reliability.
- The 288-pin form factor allows for easy installation in compatible systems.
This is just an example and the actual content of the overview would depend on the specific product and the information provided by the manufacturer.
Error Correction and Data Integrity
“Error Correction and Data Integrity” is a section that would describe the features and technologies included in the 726718-32G HPE 32GB 2133mzh Pc4-17000 Cas-15 Ecc Reg DDR4 SDRAM 288-Pin Ram that are designed to protect against data errors and ensure the integrity of stored and processed information.
In this specific product, it includes:
- Error Correction Code (ECC) – ECC is a technology that detects and corrects single-bit errors in memory. It works by adding a small amount of extra data, called a parity bit, to each piece of stored data. When data is read from memory, the ECC logic compares the stored parity bit with a calculated parity bit. If they don’t match, it indicates that an error has occurred, and the ECC logic will correct the error by changing the data bit back to its original value.
- Registered (Reg) – Registered memory is a type of memory that uses a register, or buffer, to control the flow of data between the memory and the memory controller. This allows for a higher number of memory modules to be used in a system, and also provides additional protection against data errors.
These two technologies help to increase the reliability and robustness of the memory module, which is particularly important in mission-critical applications such as servers, where data integrity and availability are crucial.
Installation and Setup
“Installation and Setup” is a section that would provide instructions and information on how to properly install and configure the 726718-32G HPE 32GB 2133mzh Pc4-17000 Cas-15 Ecc Reg DDR4 SDRAM 288-Pin Ram in a compatible system.
The actual instructions for installation and setup would depend on the specific system and configuration, but in general, it could include information such as:
- Verify that the system is compatible with the memory module and that it has an available 288-pin DIMM slot.
- Power off the system and unplug the power cord.
- Ground yourself by touching a metal surface to discharge any static electricity.
- Carefully open the system’s memory compartment.
- Locate the correct DIMM slot and align the notches on the module with the keys in the slot.
- Firmly press the module into the slot until it is seated properly.
- Close the memory compartment and plug the power cord back in.
- Power on the system and enter the system BIOS or UEFI firmware to verify that the memory is recognized and configured properly.
It is important to follow the manufacturer’s instructions and the system documentation carefully to ensure that the memory is installed and configured correctly. And also it is important to check the system and memory compatibility before installing the module.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 726718-32G
- Type: Memory (RAM)
- Sub-Type: PC4-17000
- Product Name: 32GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 32GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 4 X 8GB
- Bus Speed: 2133mhz DDR3-2133/PC4-17000
- Data Integrity Check: Ecc
- Signal Processing: Registered , Single Rank
- Cas Latency: Cl15
- Voltage: 1.2v
- Platform Support: Proliant Server Gan9
Desingned For
- Apollo 4520 Gen9, 4530, Proliant Bl460c Gen9, Bl660c Gen9, Dl160 Gen9, Dl180 Gen9, Dl360 Gen9, Dl380 Gen9, Dl388 Gen9, Dl560 Gen9, Dl580 Gen9, Dl80 Gen9, Ml110 Gen9, Ml350 Gen9, Ws460c Gen9, Xl170r Gen9, Xl190r Gen9, Xl230a Gen9, Xl250a Gen9, Storeeasy 3850
