Description
Installation and Configuration
The AJ716-63001 HP 8GB Short Wave B-Series Fibre Channel 1 Pack SFP Transceiver is a hot-swappable transceiver module designed to provide high-speed connectivity for Fibre Channel networks. The module is compatible with HP switches and storage devices that support the Small Form-factor Pluggable (SFP) interface.
Here are the steps to install and configure the AJ716-63001 transceiver:
- Power off the HP switch or storage device that you plan to install the AJ716-63001 transceiver into.
- Locate the SFP slot on the HP device. The SFP slot is usually located on the rear panel of the device.
- Remove the protective cap from the SFP slot.
- Insert the AJ716-63001 transceiver module into the SFP slot. Ensure that the module is properly aligned with the slot and push it firmly into place.
- Power on the HP device.
- Check the device’s documentation to confirm that the transceiver has been recognized and is functioning properly.
- If the transceiver is not recognized or is not functioning properly, check that the transceiver is compatible with the device and that it has been installed correctly.
- Configure the HP device to use the AJ716-63001 transceiver. Consult the device’s documentation for specific instructions on how to configure the SFP interface.
- Test the connectivity of the AJ716-63001 transceiver by connecting it to another Fibre Channel device or switch. Check that the link is up and that data is being transmitted correctly.
- If you encounter any issues during the installation or configuration process, consult the HP device’s documentation or contact HP support for assistance.
Troubleshooting and Maintenance
The AJ716-63001 is a Short Wave B-Series Fibre Channel 1 Pack SFP Transceiver manufactured by HP. Here are some troubleshooting and maintenance tips for this device:
- Ensure that the transceiver is properly inserted into the SFP slot. Check for any visible damage or debris on the connector.
- Check the compatibility of the transceiver with the switch or device it is being used with. Verify that the device supports the transceiver’s wavelength and distance capabilities.
- If the transceiver is not being recognized by the device, try restarting the device or resetting the transceiver.
- Verify that the fiber optic cable is properly connected and that the cable is not damaged.
- Check the power levels of the transceiver using diagnostic tools provided by the switch or device. If the power levels are abnormal, the transceiver may need to be replaced.
- Clean the transceiver with a lint-free cloth and alcohol-based cleaning solution. This will help remove any dirt or debris on the connector that may affect its performance.
- Regularly inspect the transceiver and cable for any signs of wear or damage. If any issues are found, replace the affected component immediately.
- Keep the transceiver and cable away from any sources of electromagnetic interference, such as large motors or electrical equipment.
- Follow the manufacturer’s guidelines for handling and storage of the transceiver. Avoid exposing the transceiver to extreme temperatures, humidity, or shock.
- Keep a spare transceiver on hand in case of failure. This will help ensure that the device remains operational in the event of a failure.
Compatibility and Interoperability
The AJ716-63001 HP 8GB Short Wave B-Series Fibre Channel 1 Pack SFP Transceiver is designed to be compatible with HP switches and storage devices that support the Small Form-factor Pluggable (SFP) interface. However, it is important to confirm the compatibility of the transceiver with the specific HP device before installation.
Here are some factors to consider when assessing the compatibility and interoperability of the AJ716-63001 transceiver:
- Device Compatibility: The AJ716-63001 transceiver is compatible with HP switches and storage devices that support the SFP interface. Consult the device’s documentation to confirm that it supports the transceiver.
- Operating Wavelength: The AJ716-63001 transceiver operates at a wavelength of 850 nm. Check that the device supports this wavelength range.
- Distance and Data Rate: The AJ716-63001 transceiver is designed for short-range connections (up to 150 meters) and supports a data rate of 8 Gbps. Check that the device supports the required distance and data rate.
- Multi-Source Agreement (MSA): The AJ716-63001 transceiver complies with the SFP Multi-Source Agreement (MSA), which defines the mechanical, electrical, and functional specifications for SFP transceivers. Ensure that the device also complies with the MSA.
- Brand Compatibility: While the AJ716-63001 transceiver is designed for use with HP devices, it may also be compatible with other brand devices that support the SFP interface. However, it is important to confirm compatibility with the specific device before installation.
General Information about the HP AJ716-63001
- Manufacturer: HP
- Part Number or SKU# AJ716-63001
- Spare Part Number: 468507-001
- Transceiver Type: SFP+ Transceiver Module
- Form Factor: Plug-in Module
Networking for SFP+ Transceiver Module
- Connectivity Technology: Wired
- Cabling Type: Fibre Channel
- Data Link Protocol: 2Gb Fibre Channel, 4Gb Fibre Channel, 8Gb Fibre Channel
- Data Transfer Rate: 8 Gbps
- Optical Wave Length: 850 nm
- Max Transfer Distance: 984 ft
Expansion / Connectivity
- Interfaces: 1 x 8Gb Fibre Channel – LC multi-mode x 2
- Compatible Slots: 1 X SFP+
Dimensions
- Height: 0.5 inch
- Width: 2.2 inch
- Depth: 0.5 inch
- Weight: 1 LBS
Compatibility
- Brocade 8Gb SAN Switch 8/12c, 8/24c, 8/24c Power Pack+ HP 8Gb Virtual Connect Fibre Channel Module for c-Class BladeSystem HPE 1606 Base Extension SAN Switch, 1606 Full Extension SAN Switch, 1606 Power Pack+ Extension SAN Switch, 32-port 8Gb/s Director Blade, 8/24 Base (16) Full Fabric Ports Enabled SAN Switch, 8/8 (8) Full Fabric Ports Enabled SAN Switch, 8/8 Base (0) e-port SAN Switch, SAN Switch 8/80 Power Pack+, SN6000B 16Gb 48-port/24-port Active Fibre Channel Switch, SN6000B 16Gb 48-port/24-port Active Power Pack+ Fibre Channel Switch, SN6000B 16Gb 48-port/48-port Active Fibre Channel Switch, SN6000B 16Gb 48-port/48-port Active Power Pack+ Fibre Channel Switch, SN8000B 32-port 8Gb/s Director Blade, SN8000B 48-port 8Gb/s Director Blade HPE BLc3000 Enclosure HPE BLc7000 Single-Phase Enclosure w/2 Power Supplies and 4 Fans w/8 Insight Control Environment Trial Licenses
- w/6 Power Supplies and 10 Fans w/16 Insight Control Environment Licenses HPE BLc7000 Three-Phase Enclosure w/6 Power Supplies and 10 Fans w/16 Insight Control Environment Licenses HPE StorageWorks 2408 FCoE Base Converged Network Switch, 2408 FCoE Converged Network Switch Power Pack+, 8/8 (8) Full Fabric Ports Enabled SAN Switch, 8/8 Base (0) e-port SAN Switch, Encryption SAN Switch, MSL2024 Ultrium 1840, MSL2024 Ultrium 3000, MSL2024 Ultrium 3280, MSL4048 Ultrium 3000, MSL4048 Ultrium 3280, MSL8096 Ultrium 3280, SAN Director 16-port 8Gb Fibre Channel Blade, SAN Director 32-port 8Gb Fibre Channel Blade, SAN Director 48-port 8Gb Fibre Channel Blade, SAN Switch 8/24 Base, SAN Switch 8/40 Base, SAN Switch 8/40 Power Pack, SAN Switch 8/80 Base, SAN Switch 8/80 Power Pack HPE StoreFabric 8/24 8Gb Bundled Fibre Channel Switch.