J4858-69101 HP Procurve Networking Gigabit-Sx-Lc Mini-GBIC. New Factory Sealed 3 Years HP Warranty.

The J4858-69101 HP ProCurve Networking Gigabit-Sx-Lc Mini-GBIC transceiver is a small form-factor pluggable (SFP) module designed to provide high-speed connectivity for networking equipment. It is specifically designed for use with HP ProCurve networking equipment, but may also be compatible with other devices that support SFP modules.

The benefits and advantages of the J4858-69101 HP ProCurve Networking Gigabit-Sx-Lc Mini-GBIC transceiver include:

• High-speed connectivity: The J4858-69101 module provides Gigabit Ethernet connectivity over multimode fiber, with a maximum data transfer rate of 1 Gbps. This high-speed connectivity makes it ideal for use in data centers, server farms, and other high-performance networking environments.
• Small form-factor design: The J4858-69101 module is designed to be small and lightweight, making it easy to install and deploy in networking equipment. Its small form-factor design also allows for greater flexibility in network design and topology.
• Easy installation and configuration: The J4858-69101 module is hot-swappable, meaning it can be installed or removed without powering down the networking equipment. It also supports plug-and-play installation, which simplifies the process of adding new networking devices to an existing network.
• Cost-effective: The J4858-69101 module is a cost-effective solution for upgrading or expanding existing networks. It allows for greater flexibility in network design and topology, without the need for expensive upgrades or equipment replacements.
• High reliability: The J4858-69101 module is designed to be highly reliable, with low error rates and a long lifespan. It also supports advanced features like fault detection and automatic link restoration, which help to ensure network uptime and availability.

J4858-69101 is a mini-GBIC transceiver module for HP Procurve Networking equipment, specifically designed for Gigabit Ethernet over fiber optic cables. Here are some common issues that may arise when using this transceiver and some troubleshooting tips:

• No connectivity: If there is no connectivity, make sure that the transceiver is properly installed and seated in the slot. Check the cable connections on both ends and make sure that they are securely connected. If the issue persists, try using a different transceiver or cable to isolate the problem.
• Slow performance: If the performance of the network is slow, check the cable quality and length. Make sure that the cable is within the recommended length and that it is a high-quality fiber optic cable. Additionally, check the fiber optic connectors and make sure that they are clean and free from dust or debris.
• Signal loss: If there is a signal loss, check the power levels of the transceiver. Use an optical power meter to measure the power levels and make sure that they are within the recommended range. If the power levels are too low, it may be due to a faulty transceiver or cable.
• Compatibility issues: Ensure that the transceiver is compatible with the network equipment and fiber optic cable being used. If not, try using a different transceiver that is compatible with the network equipment.
• Firmware issues: Make sure that the firmware on the network equipment is up to date. An outdated firmware version can cause compatibility issues or performance problems.
• Environmental factors: Make sure that the transceiver is being used within its recommended operating temperature range. If the temperature is too high or too low, it can cause performance issues.
• Physical damage: Check the transceiver for physical damage, such as cracks or bent pins. If there is damage, replace the transceiver.

Maintenance and Care

J4858-69101 is a small form-factor pluggable (SFP) transceiver module used in HP Procurve Networking switches to provide Gigabit Ethernet connectivity over fiber optic cables. Here are some tips on maintenance and care of this module:

• Handle with care: The J4858-69101 module is a delicate device and should be handled with care. Avoid dropping or mishandling it to prevent damage.
• Clean the connectors: The connectors on the module should be kept clean to ensure optimum performance. Use a clean, lint-free cloth to wipe the connectors and remove any dust or debris. Avoid using solvents or other cleaning agents that could damage the module.
• Keep the module dry: Moisture can damage the module, so keep it dry at all times. If the module gets wet, remove it from the switch and allow it to dry completely before using it again.
• Store properly: When not in use, store the module in a safe place where it will not be exposed to dust or moisture. Ideally, the module should be stored in an antistatic bag to prevent static electricity from damaging it.
• Check for compatibility: Before installing the J4858-69101 module, make sure that it is compatible with your HP Procurve Networking switch. Refer to the switch documentation or contact HP support if you are unsure.
• Follow installation instructions: Follow the installation instructions provided with the module carefully to ensure proper installation. Make sure that the module is inserted into the correct slot and that it is securely in place.
• Monitor performance: Keep an eye on the performance of the module and the switch to which it is attached. If you notice any issues, such as slow data transfer or dropped connections, contact HP support for assistance.

General Information

• Form Factor : Plug-In Module
• Interface : Sfp (Mini-Gbic)
• Features : Full Duplex Capability

Networking

• Connectivity Technology : Wired
• Data Transfer Rate : 1 Gbps
• Data Link Protocol : Ethernet Gigabit Ethernet
• Cabling Type : Ethernet 1000base-Sx
• Compliant Standards : Ieee 802.3z