J9153A HPE X132 10G SFP LC 10 GBASE-ER Transceiver | Refurbished

Installation of the J9153A HPE X132 10G LC 10 GBASE-ER SFP Transceiver:

• Make sure the device that the transceiver will be installed in is powered off and unplugged.
• Locate the SFP transceiver port on the device and remove the blank SFP cover if one is present.
• Carefully align the transceiver with the port, making sure that the notches on the transceiver match the notches on the port.
• Gently push the transceiver into the port until it clicks into place.
• Power on the device and check that the transceiver is recognized and functioning properly.

Maintenance of the J9153A HPE X132 10G LC 10 GBASE-ER SFP Transceiver:

• Regularly check the transceiver for any physical damage, such as cracks or bent connectors.

• Clean the transceiver and the port it is installed in with a dry or slightly damp cloth.
• Check the transceiver’s connection status and signal quality to ensure it is functioning properly.
• If the transceiver is not functioning properly or is damaged, it should be replaced.
• Regularly check the transceiver’s firmware and update it if necessary.

It is important to follow the manufacturer’s instructions and guidelines for proper installation and maintenance of the J9153A HPE X132 10G LC 10 GBASE-ER SFP Transceiver to ensure optimal performance and longevity.

The J9153A HPE X132 10G LC 10 GBASE-ER SFP Transceiver has several performance monitoring features that allow users to monitor and troubleshoot the device’s performance. These features include:

• Link Status: Indicates whether the link is up or down.
• RX Power: Displays the received power level in dBm.
• TX Power: Displays the transmitted power level in dBm.
• Temperature: Displays the internal temperature of the transceiver in degrees Celsius.
• Voltage: Displays the voltage level of the transceiver in volts.

Additionally, the transceiver also supports the use of the Digital Diagn Monitoring Interface (DDMI), which allows for more detailed monitoring of the device’s performance and status. This includes information such as the transceiver’s serial number, vendor name, and wavelength.

All these features allows network administrator to monitor the status and performance of the link between the transceiver and the other networking equipment, which helps to quickly identify and troubleshoot any issues that may arise.

The J9153A HPE X132 10G LC 10 GBASE-ER SFP Transceiver is a high-performance transceiver that is designed to support 10 Gigabit Ethernet over single mode fiber. It has a wavelength of 1550 nm and a maximum distance capability of 40 km.

The wavelength of 1550 nm is in the infrared range and is commonly used for long-distance fiber optic communications. This wavelength is able to travel through single mode fiber with minimal attenuation, which means that the signal can travel further without losing strength.

The maximum distance capability of 40 km is the maximum distance that the transceiver can transmit a signal without the need for signal amplification. This distance is ideal for connecting data centers, enterprise networks, and service provider networks that are located far apart.

The J9153A HPE X132 10G LC 10 GBASE-ER SFP Transceiver also supports 10 GBASE-ER (10 Gigabit Ethernet over Extended Reach) which is a standard that enables the transmission of 10 Gigabit Ethernet over distances up to 40 km. This allows the transceiver to support high-speed data transfer over long distances, making it ideal for use in a variety of applications.