Description
Managed Switching Capabilities
The JG726-61101 HPE FlexFabric 5930-32QSFP+ Switch provides advanced managed switching capabilities:
- Layer 2 Switching: The switch supports Layer 2 switching, allowing for the efficient forwarding of network traffic based on MAC addresses.
- Layer 3 Routing: The switch also supports Layer 3 routing, which enables the routing of network traffic based on IP addresses and the creation of virtual networks.
- Quality of Service (QoS): The switch supports Quality of Service (QoS), which helps to prioritize network traffic and ensure that critical applications receive the necessary bandwidth and low latency.
- Virtual Networks: The switch supports virtual network technologies, such as VLANs and VRF, allowing for the creation of multiple virtual networks within a single physical network.
- Access Control: The switch supports access control features, such as port security and 802.1X authentication, to help secure the network and prevent unauthorized access.
- Management and Monitoring: The switch offers comprehensive management and monitoring tools, including a web-based interface and command line interface, for easy configuration and monitoring.
Network Security Features
The JG726-61101 HPE FlexFabric 5930-32QSFP+ Switch provides several network security features:
- Access Control: The switch supports access control features, such as port security and 802.1X authentication, to help secure the network and prevent unauthorized access.
- Network Segmentation: The switch supports network segmentation, which helps to improve network security by dividing the network into smaller, more manageable segments.
- Encryption: The switch supports encryption technologies, such as SSL and IPsec, to help protect against network threats and ensure secure communication.
- Firewall: The switch may also include a firewall to help protect against network threats and unauthorized access.
- Advanced Threat Protection: The switch may offer advanced threat protection features, such as intrusion detection and prevention, to help detect and prevent network threats.
- Monitoring and Logging: The switch provides tools for monitoring and logging, including support for SNMP and RMON, to help detect and respond to network security incidents.
Firmware and Software Upgrades
The JG726-61101 HPE FlexFabric 5930-32QSFP+ Switch may require firmware and software upgrades to ensure optimal performance, security, and to provide access to new features and capabilities. The following is an explanation of the firmware and software upgrade process:
- Upgrading Firmware: Firmware is the software that controls the basic operations of the switch. Firmware upgrades can be performed using the web-based interface or command line interface and may require a reboot of the switch to complete the upgrade.
- Upgrading Software: The switch may run additional software applications, such as network management software, that can be upgraded as needed. Software upgrades can also be performed using the web-based interface or command line interface.
- Planning Upgrade: Before upgrading, it is important to review the release notes and to plan the upgrade to ensure that the upgrade process is completed smoothly and without interruptions to network operations.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: JG726-61101
- Type: Networking
- Sub-Type: Switch 32 Ports
- Device Type : Switch – 32 Ports – L3 – Managed
- Enclosure Type : Rack-Mountable – 1u
- Subtype : 40 Gigabit Ethernet
- Ports : 32 X 40 Gigabit Qsfp+
- Performance : Throughput : 1905 Mpps, Routing/Switching Capacity : 2560 Gbps
- Capacity : Ipv4 Routing Table Entries : 16000, Ipv6 Routing Table Entries : 8000
- Mac Address Table Size : 288k Entries
- Jumbo Frame Support : Yes
- Routing Protocol : Ospf, Bgp-4, Is-Is, Rip-1, Rip-2, Igmp, Vrrp, Ospfv2, Ospfv3, Static Ipv6 Routing, Ripng, Is-Isv6, Bgp-4+, Mpls, Bidirectional Forwarding Detection (Bfd)
- Remote Management Protocol : Snmp 1, Telnet, Snmp 3, Snmp 2c, Tftp, Cli
- Authentication Method : Secure Shell (Ssh), Radius, Tacacs+, Secure Shell V.2 (Ssh2)
- Ram : 4 Gb – Sdram
- Flash Memory : 512 Mb
Expansion / Connectivity
- Interfaces : 32 X 40gbit Lan – Qsfp+ 1 X Serial (Console) – Rj-45 1 X Management (Lan) – Rj-45 1 X Usb 2.0
Power
- Power Device : Internal Power Supply
- Installed Qty : 0 (Installed) / 2 (Max)
- Power Redundancy : Optional
- Power Redundancy Scheme : 1+1 (With Optional Power Supply)
- Power Consumption Operational : 409 Watt
