Description
Overview of SAS HDD
High Compatibility
When using the HPE 1TB 7.2K RPM SAS-6GBPS 2 Port Midline Hard Drive (part number 606228-001), it is important to ensure that it is compatible with the system it is being used in. Here are some factors to consider when determining compatibility:
- Interface: The hard drive uses a SAS interface, so the system must have a SAS controller or SAS backplane that is compatible with the hard drive.
- Form factor: The hard drive has a 3.5-inch form factor, so it must be installed in a system that can accommodate a 3.5-inch hard drive.
- Power requirements: The hard drive requires a 12V power supply, so the system must have a power supply that can provide the appropriate voltage and current.
- Operating system: The hard drive should be compatible with the operating system of the system it is being used in. It is recommended to check the hard drive’s compatibility with your operating system before installing it.
- System specifications: The system should meet the minimum specifications required by the hard drive. This can be found on the hard drive’s technical specifications.
It is important to check the compatibility list provided by the manufacturer, HPE in this case, and consult the system documentation before installing the hard drive. It is also recommended to contact the manufacturer or a qualified technician if you have any questions about compatibility.
It is also recommended to implement regular backups, RAID and monitoring system health to ensure data reliability and availability.
Installation and setup
Installing and setting up the HPE 1TB 7.2K RPM SAS-6GBPS 2 Port Midline Hard Drive (part number 606228-001) will vary depending on the specific system it is being installed in. However, here are some general steps that may be followed:
- Verify that the system is compatible with the hard drive and that all necessary cables and connectors are available.
- Turn off the system and disconnect all power cables before installing the hard drive.
- Install the hard drive into the appropriate drive bay or backplane in the system. This may involve screwing the hard drive into place or sliding it into a tray.
- Connect the hard drive to the SAS controller and/or SAS backplane using the appropriate cables and connectors.
- Turn on the system and enter the system’s BIOS or UEFI settings. Configure the system to recognize the new hard drive.
- Boot the system into the operating system and use disk management tools to format the hard drive and create partitions if necessary.
It is important to read the manufacturer’s documentation for the specific system and the hard drive for detailed instructions on how to install and set up the hard drive. It is also recommended to seek the help of a qualified technician if you are not experienced with installing hard drives.
Additionally, it is important to ensure that the hard drive is securely fastened and properly connected to the system. Improper installation can cause damage to the hard drive and result in data loss.
Product Information:
Manufacturer Name: HPE
MPN: 606228-001
Type: Hard Drive – Hot-Swap – NearLine
HDD Type: SAS 6GBPS
Option Part Number: AP861A
Spare Part Number: 604080-001
Spare Part Number: 605474-001
Assembly Number: 719770-001
Assembly Number: 658427-001
SKU: 606228-001
Technical Information
Capacity: 1TB
Interface: SAS 6GBPS
Form Factor: 3.5 Inch LFF
Workload Type: Midline
Plug Type: Hot Plug
Features: Dual Port
Buffer: 16 MB
Performance
Data Transfer Rate: 6GB/Sec (External)
Spindle Speed: 7200 RPM
Expansion & Connectivity
Compatible Bay: 3.5 Inch LFF
Interfaces: 1 x SAS 6GB/S
Dimension and Weight
Width: 4 Inch
Depth: 5.8 Inch
Height: 1 Inch
Weight: 1.52 LBS
Miscellaneous
Included Accessories: 3.5 Inch LFF Hard Drive Tray
Compatibility:
HPE Modular Smart Array P2000 G3 10GbE iSCSI Dual Controller LFF Array System, P2000 G3 FC Dual Controller LFF Modular Smart Array System, P2000 G3 FC Dual Controller Small Business SAN Starter Kit, P2000 G3 FC/iSCSI Dual Combo Controller LFF Array System, P2000 G3 iSCSI Dual Controller LFF Array System, P2000 G3 SAS Dual Controller LFF Array, P2000 G3 SAS Dual Controller LFF Array System, P2000 G3 SAS MSA Dual Controller LFF Array System
HPE StorageWorks Modular Smart Array P2000 G3 10GbE iSCSI MSA Dual Controller LFF Array, P2000 G3 FC Dual Controller LFF Array, P2000 G3 FC/iSCSI Dual Combo Controller LFF Array, P2000 G3 iSCSI MSA Dual Controller LFF Array, P2000 G3 MSA FC Dual Controller LFF Modular Smart Array System, P2000 G3 SAS Dual Controller LFF Array
