Description
Physical dimensions and weight of the hard disk drive
The HPE 619288-001 hard disk drive has a 2.5-inch Small Form Factor (SFF) and measures 7.0 x 10.0 x 2.0 cm (2.76 x 3.94 x 0.79 in) in physical dimensions. It has a weight of approximately 227 grams (0.5 lbs). The small form factor and lightweight design of the hard disk drive make it suitable for use in high-density storage systems that require a large number of drives in a small space. The hard disk drive also comes with a tray that enables hot swapping and easy installation and removal from a server system.
Capacity and performance of the hard disk drive
The HPE 619288-001 hard disk drive has a capacity of 450GB and a rotational speed of 10,000 RPM. It supports a data transfer rate of 6Gbps and uses a Dual Port SAS interface, which provides high-speed connectivity and redundancy in case of failure. The hard disk drive has an average seek time of 3.5 ms and a buffer size of 64MB, which helps to improve its performance. It also features hot-swapping capability, allowing for easy replacement without shutting down the server. Overall, the HPE 619288-001 hard disk drive is designed for enterprise-level applications that require high performance and reliability.
Interface and transfer rate of the hard disk drive
The HPE 619288-001 hard disk drive uses a Dual Port SAS (Serial Attached SCSI) interface with a data transfer rate of 6Gbps. SAS is a popular interface for enterprise-level storage systems because of its high speed and reliability. The Dual Port feature provides redundancy and failover capability in case one of the ports fails. This interface allows for fast data transfer and improved performance. The SAS interface also supports more devices per controller than SATA interfaces, making it suitable for high-density storage systems. The HPE 619288-001 hard disk drive is a good choice for enterprise storage applications that require high-speed data access and transfer.
Power consumption and cooling requirements
The HPE 619288-001 hard disk drive has a power consumption of approximately 7 watts when idle and 11 watts when operating. The actual power consumption can vary depending on the workload and the server configuration. The hard disk drive is designed to operate within a specific temperature range and requires adequate cooling to prevent overheating. It is important to ensure that the server system has sufficient airflow and cooling to maintain the operating temperature of the hard disk drive within the specified range. Proper cooling also helps to extend the lifespan of the hard disk drive and prevent data loss due to overheating.
General Information
- Manufacture: HPE
- MPN: 619288-001
- Type : Hard Drive (HDD)
- Sub-Type : 450GB 10K RPM SAS 6GBPS
- SKU: 619288-001
Technical Information
- Device Type : Hard Drive – Hot-swap
- Capacity : 450 GB
- Form Factor : 2.5 SFF
- Interface : SAS 6GB/S
- Data Transfer Rate : 600 MBPS
- Spindle Speed : 10000 RPM
- Bytes Per Sector : 512
Physical
- Width : 3.1 In
- Depth : 5.4 In
- Height : 0.6 In
Expansion & Connectivity
- Interfaces : 1 X SAS 6 GB/S
- Seek Time : 4 MS (average) / 8 MS (max)
- Compatible Bays : 2.5 SFF
Environmental Parameters
- Min Operating Temperature : 50 °F
- Max Operating Temperature : 95 °F
Compatibility
- Integrity Bl860c I4, Proliant Bl460c G6, Bl460c G7, Bl465c G6, Bl465c G7, Bl620c G7, Bl680c G7, Bl685c G6, Bl685c G7, Dl120 G7, Dl160 G6, Dl160se G6, Dl165 G7, Dl180 G6, Dl320 G6, Dl360 G6, Dl360 G7, Dl370 G6, Dl380 G6, Dl380 G7, Dl385 G6, Dl385 G7, Dl580 G7, Dl585 G6, Dl585 G7, Dl785 G6, Dl980 G7, Ml350 G6, Ml370 G6, Ws460c G6
