654752-001 HPE Dual-rotor Enhanced Fan Assembly for Proliant DL360P GEN8 | Refurbished

The 654752-001 HPE Dual-rotor Enhanced Fan Assembly for Proliant DL360P GEN8 has several key features and benefits:

• Enhanced cooling performance: The dual-rotor design of the fan assembly increases airflow, providing better cooling for the server and helping to prolong the life of the hardware.
• Hot-swappable design: The fan assembly can be easily replaced without having to power down the server, minimizing downtime.
• Low noise level: The fan assembly is designed to operate quietly, making it suitable for use in environments where noise levels need to be kept to a minimum.
• Quality and reliability: The fan assembly is manufactured by HPE, a leading provider of server hardware, ensuring a high level of quality and reliability.
• Easy installation: The fan assembly is designed to be easy to install, with clear instructions and minimal required tools.
• Increased power efficiency: The fan assembly is designed to consume less power, which results in cost savings and reduce the environmental impact.
• Compatible with Proliant DL360P Gen8: The fan assembly is specifically designed for use with the Proliant DL360P Gen8 server, ensuring a perfect fit and optimal performance.

Troubleshooting and Maintenance Tips

Here are some troubleshooting and maintenance tips for the 654752-001 HPE Dual-rotor Enhanced Fan Assembly for Proliant DL360P Gen8:

• Check the airflow: If the server is running hot, check the airflow to ensure that the fan assembly is functioning properly. Make sure that there is no dust or debris blocking the air intake or exhaust.
• Monitor the noise level: If the fan assembly is making excessive noise, check for any loose parts or debris that may be causing the noise.
• Check the power consumption: If the fan assembly is consuming more power than normal, check for any issues with the power supply or connections.
• Keep the fan assembly clean: To prolong the life of the fan assembly, make sure to keep it clean by regularly removing dust and debris.
• Check the firmware: Ensure that the server’s firmware is up to date to ensure compatibility with the fan assembly.
• Check the server’s temperature: If the server’s temperature is higher than normal, check the fan assembly to ensure that it is working properly.
• Regularly check the fan assembly: It’s important to regularly check the fan assembly to ensure that it is functioning properly and to identify any potential issues before they become a problem.
• Replace fan assembly if needed: If the fan assembly is not functioning properly or has reached the end of its lifespan, it should be replaced.

It’s important to keep in mind that these are general troubleshooting and maintenance tips and it’s always best to consult the user manual of the Proliant DL360P Gen8 server for specific instructions and guidelines.

Installation Instructions

Here are some general installation instructions for the 654752-001 HPE Dual-rotor Enhanced Fan Assembly for Proliant DL360P Gen8:

• Before beginning the installation process, make sure that the server is powered off and unplugged from the electrical outlet.
• Open the server’s access panel and locate the existing fan assembly.
• Carefully remove the existing fan assembly by releasing the tabs or levers that hold it in place.
• Take the new fan assembly and insert it into the fan assembly bay, making sure that it is properly aligned and seated.
• Secure the new fan assembly in place by engaging the tabs or levers.
• Close the server’s access panel.
• Plug the server back in and power it on.
• Check the server’s system management software to ensure that the new fan assembly is properly recognized and functioning.