Description
Product Description and Features
The 661530-B21 HPE Dual Rotor Enhanced Fan Assembly for Proliant DL360P GEN8 servers features a dual rotor design, which provides several benefits over standard fan assemblies.
- Increased airflow: The dual rotor design allows for a higher airflow rate, which helps to improve the cooling of the server components and prevents overheating.
- Greater static pressure: The dual rotor design allows for a higher static pressure, which helps to push air through the server’s heat sinks and other cooling components, improving the overall cooling efficiency.
- Lower noise level: The dual rotor design allows for a lower noise level, as the fans can operate at a slower speed while still providing the necessary airflow. This makes the server quieter and more suitable for use in a work environment.
- Increased reliability: The dual rotor design allows for increased reliability, as the fans can operate at a lower speed, which reduces wear and tear on the fan bearings and increases the mean time between failure (MTBF).
- Improved serviceability: The dual rotor design allows for improved serviceability, as the fans can be replaced individually in case of failure, rather than having to replace the entire fan assembly.
- Redundancy: The dual rotor design allows for redundancy, as if one fan fails, the other one can still operate, this can prevent complete server shut down.
- Energy-Efficiency: The dual rotor design allows for energy-efficiency, as the fans can operate at a lower speed, this can reduce energy consumption and lower the server’s overall power usage.
Installation Process
The installation process for the HPE Dual Rotor Enhanced Fan Assembly for Proliant DL360P GEN8 servers is relatively straightforward, but it should be performed by a qualified technician to ensure proper installation and to avoid damage to the server or the fan assembly.
- Power off the server and disconnect all cables before proceeding with the installation.
- Locate the fan assembly in the server and remove the old fan assembly by releasing the retention clips and carefully pulling it out of the server.
- Carefully align the new fan assembly with the retention clips and slide it into place in the server.
- Secure the new fan assembly by engaging the retention clips.
- Reconnect all cables and power on the server.
- Verify that the fan assembly is properly installed and that the fans are operating correctly.
- Check the server’s temperature, noise level and airflow to ensure that the new fan assembly is properly working.
- Finally, update the server’s firmware and the BIOS to ensure that the new fan assembly is properly recognized and that it can be configured and monitored by the server’s management software.
It is important to note that the installation process may vary slightly depending on the specific model and configuration of the server. It is recommended to consult the manufacturer’s documentation or consult with the technical support team for more information on the installation process for the HPE Dual Rotor Enhanced Fan Assembly for Proliant DL360P GEN8 servers.
Dual Rotor Enhanced Fan Assembly
The 661530-B21 HPE Dual Rotor Enhanced Fan Assembly for Proliant DL360P GEN8 servers is a high-performance cooling solution designed to improve the cooling efficiency and reliability of the server.
This fan assembly features a dual rotor design, which provides several benefits over standard fan assemblies. The dual rotor design allows for a higher airflow rate, which helps to improve the cooling of the server components and prevents overheating. Additionally, the dual rotor design allows for a higher static pressure, which helps to push air through the server’s heat sinks and other cooling components, improving the overall cooling efficiency.
The dual rotor design also allows for a lower noise level, as the fans can operate at a slower speed while still providing the necessary airflow. This makes the server quieter and more suitable for use in a work environment. Additionally, the dual rotor design allows for increased reliability, as the fans can operate at a lower speed, which reduces wear and tear on the fan bearings and increases the mean time between failure (MTBF).
The fan assembly is also designed for improved serviceability, as the fans can be replaced individually in case of failure, rather than having to replace the entire fan assembly. The Dual Rotor design allows for redundancy, as if one fan fails, the other one can still operate, this can prevent complete server shut down. The dual rotor design also allows for energy-efficiency, as the fans can operate at a lower speed, this can reduce energy consumption and lower the server’s overall power usage.
Specification
- Part Number : 661530-B21
- Sub-Type : Proliant
- Type : Accessories
- Brand Name : HPE
Technical Specifications
- Application/Usage : Server
- Product Type : Cooling Fan
Compatibility
- HPE ProLiant Gen8 DL360e Servers
- Weight (Approximate) : 1.76 oz
- Fan Height : 11.37″
- Fan Width : 7.87″
- Fan Depth : 13.85″
