Description
Data Protection and Security
The 695503-006 HPE 2TB 7.2K RPM SATA 6GBPS 3.5 Inch Internal Hard Disk Drive provides data protection and security features to ensure that your valuable data is safe and secure. Here are some of the key features that enable this protection:
- Self-Encrypting Drive (SED): This feature ensures that all data stored on the hard disk drive is automatically encrypted using the AES-256 standard, which provides a high level of security against unauthorized access.
- Secure Erase: This feature enables you to securely erase all data on the hard disk drive, making it virtually impossible for anyone to recover the data.
- Secure Boot: This feature ensures that only authorized software is allowed to boot up the system, providing protection against malware and other security threats.
- RAID Support: The HPE 2TB Internal Hard Disk Drive supports various RAID configurations, which provide additional levels of data protection and redundancy.
- Advanced Power Management: This feature enables the hard disk drive to conserve power when not in use, which helps to prolong its lifespan and reduce the risk of data loss due to hardware failure.
- SMART (Self-Monitoring, Analysis, and Reporting Technology): This feature constantly monitors the hard disk drive for potential issues, such as bad sectors or imminent hardware failure, and provides alerts to the user before any data loss occurs.
Energy Efficiency
The 695503-006 HPE 2TB 7.2K RPM SATA 6GBPS 3.5 Inch Internal Hard Disk Drive is designed with energy efficiency in mind. It has a low power consumption rate, which means it uses less energy to operate compared to other hard disk drives on the market. This is due to its advanced power management features that allow it to conserve energy when it’s not in use.
The drive also features a rotational speed of 7,200 RPM, which helps to reduce its power consumption. This is because the higher the RPM, the more energy is required to spin the disk. A lower RPM means less energy is required to operate the drive.
In addition, the HPE 2TB Internal Hard Disk Drive uses SATA 6Gbps technology, which is more energy efficient than previous SATA standards. This means that it is able to transfer data more quickly, which reduces the time it needs to be operational and therefore, lowers its energy consumption.
Installation Process of 2TB HDD
The installation process of the HPE 2TB 7.2K RPM SATA 6GBPS 3.5 Inch Internal Hard Disk Drive is relatively simple and can be completed in a few steps:
- Ensure that the computer or server is turned off and disconnected from any power source.
- Open the computer or server case by removing the screws or latches that hold the case in place. This may vary depending on the manufacturer and model.
- Locate an available drive bay that can accommodate a 3.5-inch drive. Most computer cases have multiple bays to choose from.
- Remove the drive caddy or mounting bracket from the bay by removing any screws or latches that hold it in place.
- Attach the HPE 2TB Internal Hard Disk Drive to the caddy or bracket using the screws provided. Make sure the drive is secured tightly and doesn’t move around.
- Slide the caddy or bracket with the HPE 2TB Internal Hard Disk Drive into the drive bay until it snaps into place. Make sure the connectors on the back of the drive line up with the connectors on the motherboard.
- Use the screws or latches to secure the caddy or bracket in place.
- Connect the SATA cable to the SATA port on the motherboard and the other end to the SATA port on the HPE 2TB Internal Hard Disk Drive.
- Connect the power cable to the power port on the HPE 2TB Internal Hard Disk Drive.
- Close the computer or server case and tighten the screws or latches to hold it in place.
- Turn on the computer or server and enter the BIOS settings to verify that the new drive is recognized by the system.
- Once the drive is recognized, you can format and partition it using the operating system’s disk management tools.
Following these steps, you should be able to install the HPE 2TB 7.2K RPM SATA 6GBPS 3.5 Inch Internal Hard Disk Drive and start using it for data storage and backup.
Detail Description
- Manufacturer: HPE
- MPN: 695503-006
- Type : Hard Disk Drive (HDD)
- HDD Type : SATA 6GBPS
- SKU: 695503-006
- Capacity: 2 TB
- Option Part Number: 659339-B21
- Spare Part Number: 659570-001
- Model Number: MB2000GCWDA
Performance
- Drive Transfer Rate: 600 MBps (external)
- Spindle Speed: 7200 RPM
Expansion & Connectivity
- Interfaces: 1 x SAS 6 Gb/s
- Compatible Bay: 3.5″ LFF
Dimension and Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 LBS
Compatibility Information
- HPE ProLiant DL Series: DL320e Gen8 (3.5 inch), DL320e Gen8 Base (3.5 inch), DL320e Gen8 Entry (3.5 inch), DL320e Gen8 Performance (3.5 inch)
- HPE ProLiant ML Series: ML310e Gen8 (3.5 inch), ML310e Gen8 Base (3.5 inch), ML310e Gen8 Entry (3.5 inch), ML310e Gen8 Performance (3.5 inch), ML350e Gen8 (3.5 inch), ML350e Gen8 Base (3.5 inch), ML350e Gen8 Entry (3.5 inch), ML350e Gen8 Performance (3.5 inch), ML350e Gen8 v2 (3.5 inch)
