Description
Hot-Swap Functionality for Quick Replacement
The hot-swap functionality of the HPE 600GB SAS hard drive means that the hard drive can be replaced while the system is still running. This allows for quick and easy replacement of a failed or defective hard drive, without the need to power down the system or take it offline.
In an enterprise-level environment, where downtime can be costly, hot-swapping is a critical feature that helps to minimize the time required to replace a failed component. It can also help to reduce the risk of data loss, since data can continue to be accessed from the remaining hard drives while the failed hard drive is being replaced.
The hot-swap feature works by allowing the system to detect when a hard drive has been removed or added, and to automatically reconfigure the system to account for the change. This means that the new hard drive can be added to the system without any manual configuration required.
It is important to note that not all systems support hot-swapping. To take advantage of this feature, the system must have the necessary hardware and software support in place. Additionally, it is recommended to follow proper hot-swapping procedures to avoid data loss or hardware damage.
Compatibility with HPE Servers and Storage Systems
The HPE 600GB SAS hard drive is designed to be compatible with a wide range of HPE servers and storage systems. It is specifically designed to work with HPE ProLiant Gen8 and Gen9 servers, HPE BladeSystems, HPE 3PAR StoreServ and StoreVirtual storage systems, and HPE MSA and HPE StoreEasy storage systems.
This level of compatibility is important for enterprise-level IT infrastructure, where a high degree of hardware interoperability and flexibility is required. IT administrators and system integrators can be assured that the HPE 600GB SAS hard drive will work seamlessly with the HPE servers and storage systems they are using, without the need for additional configuration or hardware changes.
In addition, the hard drive is designed to be hot-swappable, which further enhances its compatibility and ease of use. It allows for quick and easy replacement of a failed or defective hard drive, without the need to power down the system or take it offline.
It is worth noting that compatibility may also depend on the specific firmware and driver versions used in the system. It is recommended to check the HPE website or consult the HPE support team to ensure that the hard drive is fully compatible with the specific server or storage system being used.
Installation and Maintenance of the Hard Drive
Installing and maintaining the HPE 600GB SAS hard drive requires following a few basic steps. Here is a brief overview:
Installation:
- Ensure that the server or storage system is powered down and disconnected from the power source.
- Open the chassis of the system and locate the hard drive bays.
- Remove the drive bay blank or carrier from the desired drive bay.
- Insert the hard drive into the bay, making sure it is properly seated and secured.
- Connect the data and power cables to the hard drive.
- Replace the drive bay blank or carrier and close the chassis.
- Power on the system and ensure that the hard drive is detected by the system.
Maintenance:
- Regularly monitor the system logs and alerts for any indications of hard drive failure or errors.
- Use vendor-provided firmware and driver updates to keep the hard drive up-to-date and to ensure compatibility with the system.
- Regularly perform backups of critical data to minimize the risk of data loss in case of hard drive failure.
- If a hard drive failure is detected, follow the hot-swapping procedure to replace the failed hard drive with a new one.
It is important to note that proper handling and storage of the hard drive is also critical to its performance and lifespan. Hard drives should be kept in a cool, dry environment, and should be handled with care to avoid static discharge or physical damage.
Additionally, it is recommended to consult the manufacturer’s documentation or support team for specific instructions and best practices for installation and maintenance of the HPE 600GB SAS hard drive.
Product Information:
- Part Number : 713827-B21
- Type : Hard Drive (HDD)
- Sub-Type : 600GB 10K RPM SAS 6GBPS
- Manufacturer : Hewlett Packard Enterprise
- Brand Name : HPE
Technical Information
- Capacity : 600 GB
- Form Factor : 2.5 SFF
- Interface : SAS 6GB/S
- Data Transfer Rate : 600 MBPS
- Spindle Speed : 10000 RPM
Extended Specifications:
- Device Type : Hard Drive – Hot – Swap
- Capacity : 600 GB
- Form Factor : 2.5
- Interface : SAS 6GB/S
Performance
- Drive Transfer Rate : 600 MBPS
- Spindle Speed : 10000 RPM
