Description
Capacity and Memory Type
The “726719-64G” HPE memory module has a capacity of 64 GB, which means it can store 64 gigabytes of data. This is a large amount of memory and can be useful for running multiple programs at once or for storing large amounts of data, such as video or image files.
The memory type is DDR4. DDR4 is the latest generation of Double Data Rate (DDR) memory and it offers faster speeds, higher bandwidth and lower power consumption compared to DDR3 memory. It is also backwards compatible with previous DDR memory generations.
The memory is also specified as PC4-17000, which means it has a data transfer rate of 17000 MT/s (MegaTransfers per second). This is a measure of the memory’s speed and is one of the factors that determine how quickly data can be read from and written to the memory.
It also has a latency of CL15, which means it has a CAS latency of 15 clock cycles. CAS latency is the delay that occurs between the time a memory controller sends a request for data and the time the data is available.
The memory is also specified as ECC (Error Correction Code) memory. ECC memory is a type of memory that can detect and correct errors that occur during data transfer. This can help prevent data corruption and improve the overall stability of the system.
Finally, the memory is specified as “REG” which means it is a registered memory, also called buffered memory, which is designed for use in servers and workstations. This type of memory typically has a buffer or register between the memory controller and the DRAM, which can help to improve performance and stability in these types of systems.
ECC Technology and Pin Configuration
ECC technology, or Error Correction Code, is a feature of the “726719-64G” HPE memory module that helps to detect and correct errors that may occur during data transfer. ECC memory uses extra memory bits to store additional information that can be used to detect and correct errors. This can help to prevent data corruption and improve the overall stability of the system.
In terms of pin configuration, the memory module is specified as having a 288-pin configuration. The number of pins on a memory module corresponds to the number of electrical connections it has to the memory slot on the motherboard. DDR4 memory modules have 288 pins, which is an increase from the 240 pins used in DDR3 memory modules. This increased number of pins allows for higher data transfer rates and more efficient power consumption.
The 288-pin configuration is the current standard for DDR4 memory, and it is important to make sure that the memory module you are using is compatible with your system’s memory slot, which also has 288-pin configuration.
Installation and Setup
Installing and setting up the “726719-64G” HPE memory module involves physically inserting the module into a compatible memory slot on the motherboard and configuring the system to recognize and use the new memory.
The first step in installing the memory module is to locate the memory slots on the motherboard. These are typically located near the processor and are labeled as “DIMM” or “Memory”.
Next, you need to make sure that the memory module is properly aligned with the memory slot. To do this, you will need to line up the notches on the module with the notches on the memory slot. Once the module is aligned, you can gently press down on the module until it is fully seated in the slot. It’s important to handle the module carefully and not to use excessive force when installing it.
Once the module is installed, you will need to configure the system to recognize and use the new memory. This typically involves entering the system’s BIOS or UEFI settings and adjusting the memory configuration settings. This can include setting the memory speed, latency and other settings.
It’s important to refer to the user manual of the motherboard or the system to know the specific steps to access the bios settings and configuring the memory.
After the memory is installed and the system is configured to recognize it, you will need to reboot the system for the changes to take effect. Once the system has rebooted, you should be able to see the new memory listed in the system’s memory configuration settings.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 726719-64G
- Type: Memory (RAM)
- Sub-Type: Pc4-17000
- Product Name: 64GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 64GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 4 X 16GB
- Memory Speed: 2133mhz DDR4-2133/Pc4-17000
- Data Integrity Check: Ecc
- Features: Dual Rank, Ultra Low Voltage , Registered
- Cas Latency Timings: Cl15
- Platform Support: HP Proliant Gan9
Physical Characteristics
- Form Factor: 288-Pin Dimm
Compatibility Information
- HPE Proliant
- Bl460c Gen9, Bl460c Gen9 Base, Bl460c Gen9 Entry, Bl460c Gen9 Performance, Dl160 Gen9, Dl160 Gen9 Base, Dl160 Gen9 Entry, Dl180 Gen9, Dl180 Gen9 Base, Dl180 Gen9 Entry, Dl360 Gen9, Dl360 Gen9 Base, Dl360 Gen9 Entry, Dl360 Gen9 Performance, Dl380 Gen9, Dl380 Gen9 Base, Dl380 Gen9 Entry, Dl380 Gen9 Performance, Ml350 Gen9, Ml350 Gen9 Base, Ml350 Gen9 Entry, Ml350 Gen9 Performance, Xl230a Gen9
