Description
Overview of the HPE 192GB DDR4 RAM
The 726722-192 HPE 192GB 2133Mhz Pc4-17000 Cl15 Ecc Reg DDR4 SDRAM 288-Pin Ram is a high-performance memory module that is specifically designed for use in HPE servers. It has a capacity of 192GB, which allows for large amounts of data to be stored and processed quickly. The RAM operates at a speed of 2133Mhz, which is the standard speed for DDR4 memory and provides fast data transfer rates. It also has a 288-pin form factor, which is the standard for DDR4 RAM. Additionally, it is built with PC4-17000 standard that allows for a high-bandwidth communication between the memory and processor.
This memory module also features Error-Correcting Code (ECC) technology, which detects and corrects any errors that may occur during data transfer, ensuring the integrity and reliability of the data. It also has a feature called “Registered” (Reg) which provide a buffer between the memory controller and DRAM modules which allows the memory controller to communicate with multiple memory modules at the same time, this improves the memory scalability and stability.
The memory module has a CAS Latency (CL) of 15, which refers to the delay time between the moment a command is sent to the memory and the moment data is made available. A lower CL value indicates faster memory performance.
This memory module is ideal for enterprise-level applications that require high-performance, reliability and large memory capacity.
ECC and Registers Features
The ECC (Error-Correcting Code) feature in the 726722-192 HPE 192GB 2133Mhz Pc4-17000 Cl15 Ecc Reg DDR4 SDRAM 288-Pin Ram is a technology that detects and corrects any errors that may occur during data transfer, ensuring the integrity and reliability of the data. This is particularly important in enterprise-level applications where data integrity is critical and even a small error can have significant consequences.
ECC memory works by adding an extra bit for each byte of memory, which allows the memory controller to detect and correct any errors that occur. This is done through a process called “error detection and correction” (EDAC), which compares the data being read from the memory to the ECC code and corrects any errors that are found.
The “Registered” (Reg) feature in this memory module is a feature that provides a buffer between the memory controller and DRAM modules. This buffer allows the memory controller to communicate with multiple memory modules at the same time, improving the memory scalability and stability. The registered memory helps to reduce the loading on memory controller and allows to have more memory in the system.
Installation and Setup Guide
The installation and setup guide for the 726722-192 HPE 192GB 2133Mhz Pc4-17000 Cl15 Ecc Reg DDR4 SDRAM 288-Pin Ram involves a few simple steps that are specific to the HPE servers that it is designed to work with. The following is a general outline of the process:
- Before installing the RAM, ensure that the server is powered off and unplugged from the power source.
- Locate the memory slots on the server motherboard, they are typically located near the CPU.
- Carefully remove the protective cover from the memory slot, if there is any.
- Align the RAM with the memory slot, making sure that the notches on the RAM match up with the notches on the memory slot.
- Gently press down on the RAM until it clicks into place, ensuring that it is securely seated.
- Replace the protective cover on the memory slot, if applicable.
- Power on the server and check the memory configuration in the BIOS/UEFI setup to ensure that the new RAM is recognized and configured correctly.
- Boot up the operating system and check the memory status in system information, it should reflect the new installed memory.
It’s important to note that the above instructions are a general guide, specific instructions may vary depending on the model of the HPE server you are using. It’s always recommended to check the server manual or the HPE website for detailed instructions specific to the server you are working on.
In addition to the above, it’s always recommended to check the compatibility of the RAM with the server before purchasing, this can be done by checking the server manual or the HPE website for the supported memory specifications.
General Information of this HPE 726722-192
- Brand Name: HPE
- Model Number or SKU# 726722-192
- Type: Memory (RAM)
- RAM Type: Pc4-17000
- Product Name: 192GB DDR4 SDRAM Memory Module
Technical Information about 192GB DDR4 Ram
- Storage Capacity: 192GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 6 X 32GB
- Memory Speed: 2133mhz DDR4-2133/PC4-17000
- Data Integrity Check: Ecc
- Features: Dual Rank, Registered
- Cas Latency Timings: Cl15
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility for 192GB DDR4 Ram
- HPE Proliant Bl460c Gen9
- HPE Proliant Bl660c Gen9
- HPE Proliant Dl180 Gen9
- HPE Proliant Dl360 Gen9
- HPE Proliant Dl380 Gen9
- HPE Proliant Dl388 Gen9
- HPE Proliant Dl560 Gen9
- HPE Proliant Dl580 Gen9
- HPE Proliant Dl60 Gen9
- HPE Proliant Dl80 Gen9
- HPE Proliant Ml110 Gen9
- HPE Proliant Ml150 Gen9
- HPE Proliant Ml350 Gen9
- HPE Proliant Dl120 Gen9
- HPE Proliant Dl160 Gen9
- HPE Proliant Xl170r Gen9
- HPE Proliant Xl190r Gen9
- HPE Proliant Xl230a Gen9
- HPE Proliant Xl250a Gen9
- HPE Proliant 4xxl170r Gen9
- HPE Proliant Xl230b Gen9
- HPE Proliant Ws460c Gen9
- HPE Apollo 4200
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
