Description
Overview of HPE 512GB DDR4 RAM
The HPE 726722-512 is a high-performance RAM module designed for use in servers and high-end desktop computers. It has a capacity of 512GB, which is large enough to handle demanding applications and workloads. The RAM is built using PC4-17000 DDR4 memory technology, which allows for fast data transfer speeds of 2133MHz.
One of the key features of this RAM module is that it uses Error Correction Code (ECC) technology to detect and correct any errors that may occur during data transfer, ensuring data integrity and reliability. Additionally, it is a registered RAM, which means that it has a buffer chip that improves signal integrity and allows for better performance in multi-CPU systems.
The 288-pin design of the RAM module ensures compatibility with a wide range of motherboards and systems, and its high-speed DDR4 technology can help improve overall system performance. This RAM is suitable for use in servers, workstations, high-end gaming PCs and other demanding applications.
Error Correction and Data Integrity
Error Correction Code (ECC) is a feature that is built into the HPE 726722-512 RAM module to detect and correct any errors that may occur during data transfer. ECC works by adding extra bits of information, called parity bits, to the data being stored in memory. These parity bits are used to detect and correct errors that may occur when data is read or written to memory.
This feature is particularly important in server and enterprise environments where data integrity and reliability are critical. ECC can help prevent data corruption and ensure that the system continues to function properly even in the event of a memory error.
The HPE 726722-512 RAM is also registered RAM, which means that it has a buffer chip that improves signal integrity and allows for better performance in multi-CPU systems. This extra buffer chip also helps to improve the data integrity by reducing noise on the memory bus and allowing for more reliable data transfer.
Installation and Setup
Installing and setting up the HPE 726722-512 RAM module is a relatively straightforward process that can usually be completed in just a few minutes. Here are the general steps for installing the RAM:
- Turn off your computer and unplug it from the power source.
- Open the computer case and locate the RAM slots on the motherboard.
- Carefully remove any existing RAM modules from the slots, if necessary.
- Align the notches on the RAM module with the notches on the RAM slot, and gently press the module down into the slot until it clicks into place.
- Repeat the process for any additional RAM modules you are installing.
- Close the computer case and plug the computer back in.
- Turn on the computer and check the system properties or BIOS to verify that the RAM has been recognized and is functioning properly.
It is important to follow the proper procedures and ensure that the RAM is inserted correctly to avoid any damage to the module or the motherboard. It is also a good idea to check the motherboard’s manual or the system’s documentation to confirm the slot configuration and the maximum supported memory.
It is also important to note that some servers, workstations and high-end motherboards have specific requirements for installing RAM such as population rules, i.e. installing RAM in specific slots, and sometimes you might need to configure the memory configuration in the BIOS, but in general installing ECC RAM is the same as non-ECC memory, just pay attention to the population rules and maximum supported memory.
General Information of this HPE 726722-512
- Brand Name: HPE
- Model Number or SKU# 726722-512
- Type: Memory (RAM)
- RAM Type: Pc4-17000
- Product Name: 512GB DDR4 SDRAM Memory Module
Technical Information about 512GB DDR4 Ram
- Memory Size: 512GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 16 X 32GB
- Chip Organization: X4
- Memory Speed: 2133 Mhz
- Memory Standard: DDR4-2133/Pc4-17000
- Signal Processing: Registered, Load Reduced
- Error Checking: Ecc
- Cas Latency: Cl15
- Pin Count: 288-Pin
- Voltage: 1.2v
- Form Factor: Lrdim
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility for 512GB DDR4 Ram
- HPE Proliant Bl460c Gen9
- HPE Proliant Bl660c Gen9
- HPE Proliant Dl180 Gen9
- HPE Proliant Dl360 Gen9
- HPE Proliant Dl380 Gen9
- HPE Proliant Dl388 Gen9
- HPE Proliant Dl560 Gen9
- HPE Proliant Dl580 Gen9
- HPE Proliant Dl60 Gen9
- HPE Proliant Dl80 Gen9
- HPE Proliant Ml110 Gen9
- HPE Proliant Ml150 Gen9
- HPE Proliant Ml350 Gen9
- HPE Proliant Dl120 Gen9
- HPE Proliant Dl160 Gen9
- HPE Proliant Xl170r Gen9
- HPE Proliant Xl190r Gen9
- HPE Proliant Xl230a Gen9
- HPE Proliant Xl250a Gen9
- HPE Proliant 4xxl170r Gen9
- HPE Proliant Xl230b Gen9
- HPE Proliant Ws460c Gen9
- HPE Apollo 4200
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
