Description
Endurance and Reliability
The HPE 730051-B21 100GB SATA 6GBPS Mainstream Endurance SSD is designed to be a reliable and durable storage solution for enterprise applications. Its endurance and reliability are determined by several factors.
Endurance: The endurance of an SSD refers to the amount of data that can be written to it over its lifetime. The HPE 730051-B21 SSD is rated for up to 1 Drive Writes Per Day (DWPD) for five years. This means that the SSD can handle up to 1 full drive write per day for five years without experiencing any failures. This level of endurance makes it suitable for write-intensive workloads that require frequent updates or modifications to data.
Reliability: The reliability of an SSD is determined by the quality of its components, the design of its firmware, and the effectiveness of its error-correction mechanisms. The HPE 730051-B21 SSD uses Multi-Level Cell (MLC) flash memory, which provides a balance of cost-effectiveness and performance. It also incorporates advanced firmware algorithms that help to prevent data loss and ensure data integrity. The SSD also features power loss protection that helps to prevent data loss in the event of a power failure.
Additionally, the HPE 730051-B21 SSD undergoes rigorous testing and validation processes to ensure its reliability. It is tested for compatibility with HPE servers and storage systems, and it is subjected to rigorous stress and performance testing to ensure that it can withstand the demands of enterprise workloads. The SSD also comes with a 3-year warranty, which provides additional peace of mind for users.
Design and Construction
The HPE 730051-B21 100GB SATA 6GBPS Mainstream Endurance SSD is a solid-state drive designed for high-performance computing and storage systems. The following are the design and construction details of the drive:
- Form Factor: The HPE 730051-B21 100GB SATA SSD is designed in a 2.5-inch form factor that can fit into standard drive bays. It has a slim profile and a thickness of 7mm, making it suitable for use in small form factor systems.
- Interface: The SSD uses a SATA 6Gbps interface, which offers high-speed data transfer rates of up to 600MB/s. The interface is backward compatible with older SATA interfaces, ensuring compatibility with a wide range of systems.
- Storage Capacity: The drive has a storage capacity of 100GB, which is suitable for storing operating systems, applications, and data.
- NAND Flash Technology: The SSD uses 3D NAND flash technology, which allows for high-density storage in a small form factor. The technology enables faster read and write speeds, lower power consumption, and improved endurance.
- Endurance: The HPE 730051-B21 100GB SATA SSD has a mainstream endurance rating of up to 3 drive writes per day (DWPD), which makes it suitable for read-intensive workloads.
- Reliability: The drive has a mean time between failures (MTBF) of 2 million hours, which indicates high reliability and durability.
- Power Consumption: The SSD has a low power consumption of 1.56W during active use, making it energy efficient and suitable for use in systems that require low power consumption.
- Encryption: The drive supports self-encrypting drive (SED) technology, which enables data encryption without sacrificing performance.
- Operating Temperature: The SSD has an operating temperature range of 0°C to 70°C, which ensures reliable operation in a wide range of environments.
- Warranty: The HPE 730051-B21 100GB SATA SSD comes with a standard 3-year warranty, ensuring peace of mind for users.
Installation and Configuration
To install and configure the HPE 730051-B21 100GB SATA 6GBPS Mainstream Endurance SSD, follow the steps below:
- Turn off your server and unplug it from the power source.
- Open the server case and locate the drive bay where you want to install the SSD.
- Mount the SSD in the drive bay using the appropriate screws.
- Connect the SATA data cable to the SSD and the motherboard. Connect the SATA power cable to the SSD and the power supply unit.
- Close the server case and plug it back into the power source.
- Turn on the server and enter the BIOS setup.
- In the BIOS setup, configure the boot order to include the SSD as a boot device.
- Save the changes and exit the BIOS setup.
- Install the operating system on the SSD and configure it as required.
Main Information
- Manufacturer: HPE
- Part Number or SKU#: 730051-B21
- Type: Solid State Drive(SSD)
- Interface: SATA 6GBPS
Technical Information
- Storage Capacity: 100 GB
- Height: 15 Mm
- Length X Width: Standard Sff
Performance
- Random Reads : 63000 Iops
- Random Writes : 19200 Iops
- Sequential Reads : 480 Mbps
- Sequential Writes : 185 Mbps
Physical Configuration
- Logical Blocks : 512 Bytes
- Power : 9w
- Operating Temperature : 0-60°c
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
