Description
Endurance and Reliability
The HPE 741230-001 200GB SAS-12GBPS High Endurance SSD is designed to provide high endurance and reliability for demanding enterprise workloads. Some of the key features that contribute to the endurance and reliability of this SSD include:
- Endurance: The HPE 741230-001 SSD is designed to provide high endurance for write-intensive workloads. It uses enterprise-grade NAND flash memory that is optimized for endurance, and features advanced wear-leveling and error-correction technologies to help ensure data integrity and longevity.
- Reliability: The HPE 741230-001 SSD is built with a robust design that includes features such as power loss protection, which helps prevent data loss in the event of a power failure, and advanced error-correction technologies, which help ensure data integrity.
- Performance: The HPE 741230-001 SSD is designed to deliver high performance for demanding enterprise workloads. It features fast read and write speeds, as well as low latency and high IOPS (input/output operations per second) performance.
- Compatibility: The HPE 741230-001 SSD is designed to be compatible with a wide range of enterprise server and storage systems, including HPE ProLiant servers and HPE 3PAR StoreServ Storage.
- Warranty: The HPE 741230-001 SSD comes with a warranty that covers the SSD for the specified endurance rating, which is typically several years or more. This provides additional peace of mind and ensures that the SSD is protected against defects and other issues.
Installation and Configuration
Here are the general steps for installing and configuring the HPE 741230-001 200GB SAS-12GBPS High Endurance SSD:
- Verify compatibility: Before installing the SSD, ensure that it is compatible with your server or storage system.
- Power down the system: Shut down the server or storage system and disconnect it from the power source.
- Install the SSD: Locate the empty drive bay or remove the existing hard drive (if applicable) and install the SSD in its place. Secure the SSD using the appropriate screws or mounting brackets.
- Connect cables: Connect the SAS cable to the SSD and to the SAS controller on the motherboard or storage system.
- Power up the system: Reconnect the power source and power on the server or storage system.
- Access the BIOS: Enter the system BIOS to verify that the system recognizes the SSD. If necessary, configure the BIOS to recognize the SSD as a boot device.
- Install the operating system: Install the operating system on the SSD, following the normal installation procedures. If the SSD is replacing an existing hard drive, you may need to transfer the operating system and data from the old drive to the new SSD.
- Configure the SSD: Once the operating system is installed, configure the SSD for optimal performance and reliability. This may involve updating the SSD firmware, configuring RAID settings, or adjusting other system settings.
- Test the SSD: Run diagnostic tests to verify that the SSD is working properly and that data is being written and read correctly.
Management and Maintenance
To ensure optimal performance and reliability of the HPE 741230-001 200GB SAS-12GBPS High Endurance SSD, it is important to perform regular management and maintenance tasks. Here are some best practices:
- Firmware updates: Keep the SSD firmware up-to-date with the latest releases from HPE. This will ensure that the SSD is functioning optimally and that any known issues or bugs are addressed.
- SMART monitoring: Monitor the SSD’s SMART (Self-Monitoring, Analysis and Reporting Technology) data to detect any potential issues or failures. HPE provides various tools and utilities to monitor and manage the SSD’s SMART data.
- Data backups: Regularly back up critical data to prevent data loss in case of a drive failure or other issues.
- Temperature and humidity control: Keep the server or storage system environment within the recommended temperature and humidity range specified by HPE. High temperatures and humidity can affect the SSD’s performance and longevity.
- Power management: Ensure that the server or storage system is configured to provide stable and clean power to the SSD. Sudden power outages or fluctuations can cause data loss or corruption.
- RAID configurations: If the SSD is used in a RAID configuration, regularly check the RAID configuration to ensure that it is operating correctly and that the data is being stored and retrieved correctly.
- Performance tuning: If necessary, adjust system settings to optimize the SSD’s performance. This may involve adjusting I/O block sizes, enabling caching, or configuring other system parameters.
- Diagnostic tests: Run diagnostic tests on the SSD periodically to verify that it is functioning correctly and that data is being written and read correctly.
Main Information
- Manufacturer: HPE
- Part Number or SKU#: 741230-001
- Type: Solid State Drive
- Interface: SAS 12GBPS
Key Feature
- Storage Capacity: 200GB
- Drive Dimension: 2.5 Inch
- Height: 15 Mm
Performance
- Random Reads: 84,000 Iops
- Random Writes: 66,000 Iops
- Sequential Reads: 960 Mbps
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
