Description
Overview of the HPE 32GB 2133Mhz RAM
The HPE 32GB 2133Mhz Pc4-17000 DDR4 SDRAM Ecc Reg 288-Pin Ram is a type of memory module specifically designed for use in server environments. It has a capacity of 32GB and a speed of 2133 MHz, which is the standard speed for DDR4 memory. It also conforms to the PC4-17000 standard, which specifies the maximum transfer rate of the memory.
The module is also an ECC (Error Correction Code) RAM, which means it has built-in error detection and correction capabilities. This is important in server environments, where data integrity and reliability are crucial. ECC RAM is able to detect and correct single-bit errors, which can occur due to factors such as electromagnetic interference.
The module also has 288 pins, which is the standard number of pins for DDR4 memory modules. The 288-pin design allows for higher memory densities and improved signaling, which results in better performance and stability.
Benefits of Using ECC RAM in Server Environments
There are several benefits to using ECC (Error Correction Code) RAM in server environments, such as the HPE 32GB 2133Mhz Pc4-17000 DDR4 SDRAM Ecc Reg 288-Pin Ram. These include:
- Data integrity: ECC RAM has built-in error detection and correction capabilities, which can detect and correct single-bit errors that may occur due to factors such as electromagnetic interference. This ensures that data stored in memory is accurate and reliable, which is crucial in server environments where data integrity is of the utmost importance.
- Improved system stability: ECC RAM can detect and correct errors before they cause system crashes or data corruption, which can improve system stability and reduce the likelihood of downtime.
- Enhanced performance: ECC RAM can correct errors on-the-fly, which can improve system performance by reducing the need for retries and workarounds.
- Better memory protection: ECC RAM uses extra bits to store parity information, which can be used to detect and correct errors. This provides an additional layer of protection for memory, which can reduce the likelihood of data loss or corruption.
- Increased reliability: ECC RAM can detect and correct errors that non-ECC RAM would not be able to detect, which can increase the overall reliability of the system. This can be especially important in server environments, where data loss or corruption can have severe consequences.
Installation and Setup Guide
Installing and setting up the HPE 32GB 2133Mhz Pc4-17000 DDR4 SDRAM Ecc Reg 288-Pin Ram requires a few basic steps, which include:
- Power off the server and unplug it from the electrical outlet.
- Open the server’s memory compartment. This can typically be done by releasing a latch or removing a cover.
- Carefully remove any existing memory modules that are already installed in the server.
- Carefully align the HPE 32GB 2133Mhz Pc4-17000 DDR4 SDRAM Ecc Reg 288-Pin Ram with the memory slots, making sure that the notches on the module align with the keys in the slot.
- Gently press down on the module until it snaps securely into place.
- Close the server’s memory compartment and plug the server back into the electrical outlet.
- Power on the server and enter the BIOS or system setup to verify that the new memory is recognized and that the correct amount of memory is displayed.
- Set the memory timing and voltage settings according to the memory module’s specifications.
- Save the new settings and exit the BIOS or system setup.
- Check if the server is recognizing the new RAM and if the amount of RAM is correct.
It is important to follow the server manufacturer’s instructions for installing and setting up memory, as the process may vary depending on the specific server model. Additionally, it is important to handle the memory modules carefully to avoid damaging them.
It is also important to note that when adding memory to a server, it is important to use memory that is compatible with the server’s memory architecture and that the new memory must be of the same type, speed, and capacity as the existing memory.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 753225-201
- Type: Memory (RAM)
- Sub-Type: PC4-17000
- Product Name: 32GB DDR4 SDRAM Memory Module
Technical Information
- Type: Dram
- Storage Capacity: 32GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 32GB
- Memory Speed: 2133mhz DDR4-2133/PC4-17000
- Data Integrity Check: Ecc
- Signal Processing: Registered, Quad Rank
- Voltage: 1.2v
- Cas Latency Timings: Cl15
Compatibility
- HPE Proliant Bl460c Gen9
- HPE Proliant Dl160 Gen9
- HPE Proliant Dl180 Gen9
- HPE Proliant Dl360 Gen9
- HPE Proliant Dl380 Gen9
- HPE Proliant Ml350 Gen9