Description
Comparison with similar products
The HPE 800GB SAS 12GBPS Smart Carrier SSD (part number 762750-001) is similar to other HPE SAS solid state drives like the HPE 1.6TB SAS 12GBPS Smart Carrier Hot-Swap SSD (762267-001) and HPE 800GB SAS 12GBPS Value Endurance SSD (762276-001) in terms of interface, speed, form factor, and hot-swap capabilities.
In terms of capacity, the HPE 800GB SAS 12GBPS Smart Carrier SSD has the same capacity as the HPE 800GB SAS 12GBPS Value Endurance SSD, but less capacity than the HPE 1.6TB SAS 12GBPS Smart Carrier Hot-Swap SSD. This means that it is more suitable for smaller workloads or as a boot drive, while the HPE 1.6TB SAS 12GBPS Smart Carrier Hot-Swap SSD is more suitable for larger workloads or as a data drive.
All three drives support the SAS interface and have a maximum transfer rate of 12 Gbps, which allows for fast data access and transfer. All three drives are hot-swappable, meaning that they can be easily removed and replaced without the need to power down the system.
The HPE 800GB SAS 12GBPS Value Endurance SSD is an enterprise SSD, which is designed for use in mission-critical applications and environments that require high performance, reliability, and data protection, with a higher endurance than the HPE 800GB SAS 12GBPS Smart Carrier SSD.
In summary, while all three drives are similar in terms of interface, speed, and form factor, the HPE 800GB SAS 12GBPS Smart Carrier SSD is intended for use in servers and storage systems, and the HPE 800GB SAS 12GBPS Value Endurance SSD is intended for use in more demanding and critical applications.
Installation and setup
The installation and setup of the HPE 800GB SAS 12GBPS Smart Carrier SSD (part number 762750-001) involves several steps to ensure proper functioning and compatibility with the system.
- Check compatibility: Verify that the system or configuration is compatible with the drive, by checking the system’s documentation for compatibility information and requirements, such as the number of supported drives, drive bay layout, power and cooling requirements, and any additional software or firmware that may be required.
- Perform a backup: Before installing the drive, it is important to perform a backup of the data stored on the older storage solution to ensure that it can be restored in case of any issues.
- Physical installation: The drive can be installed by following the manufacturer’s instructions for replacing a hot-swappable drive. You will need to remove the old drive from the drive bay and install the new drive into the same bay.
- Firmware and driver updates: Check the drive’s firmware version, compatibility, and update it if required. Some systems may require additional software or drivers to be installed to recognize the new drive.
- Configuration: The drive will need to be initialized and formatted before it can be used. This can typically be done using the system’s BIOS or RAID controller configuration utility.
- Data restoration: After the drive is configured, the data can be restored from the backup.
It is important to follow the manufacturer’s guidelines for usage and care, such as not exceeding the maximum operating temperature and not applying physical force to the drive. It is also important to check the drive’s firmware version, compatibility and update it if required.
Performance and reliability
The HPE 800GB SAS 12GBPS Smart Carrier SSD (part number 762750-001) is designed to provide high performance and reliability for use in servers and storage systems.
In terms of performance, the drive supports a maximum transfer rate of 12 Gbps, which allows for fast data access and transfer. With a capacity of 800GB, it provides ample storage space for small to medium-sized workloads. SAS interface is known for its high-performance capabilities and reliability.
In terms of reliability, the drive is built to withstand the rigors of a data center environment, with features such as hot-swap capabilities, which allows for easy replacement of a failed drive without the need to power down the system. It also has built-in error correction and data protection features to help prevent data loss in case of a drive failure. The drive also has a MTBF (mean time between failure) that is expected to be high.
It is worth noting that the HPE 800GB SAS 12GBPS Smart Carrier SSD is not an enterprise SSD, it is not intended for use in mission-critical applications and environments that require high performance, reliability, and data protection. Therefore, it might have lower endurance and advanced data protection features than an enterprise SSD.
As with any storage device, it is important to regularly backup your data and follow the manufacturer’s guidelines for usage and care, such as not exceeding the maximum operating temperature and not applying physical force to the drive.
Main Specifications about this HPE 762750-001
- Part Number or SKU# 762750-001
- Manufacturer: HPE
- Interface: SAS 12GBPS
- Type: Solid State Drive
Technical Information of 800GB Solid State Drive
- Capacity: 800GB SSD
- Form Factor: 3.5 inch LFF
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier Converter (SCC)
- Workload Type: Enterprise Value
- Features: Value Endurance
- Bundled with: HPE Smart Carrier Converter
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
Performance for SAS 12GBPS SSD
- Data Transfer Rate: 12 Gb/sec (External)
- 4KB Random Read: 91000 IOPS
- 4KB Random Write: 28000 IOPS
- Internal Data Rate (Read): 1000 MBPS
- Internal Data Rate (Write): 390 MBPS
Expansion & Connectivity
- Interfaces: 1 x SAS 12 Gb/s
- Compatible Bay: 3.5inch LFF
Product Dimensions & Weight
- Height: 5.63 inch
- Width: 3.75 inch
- Depth: 7.00 inch
- Weight: 1.35 lbs
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
