Description
Comparison With Other Storage Solutions
The HPE 765069-001 is a 2TB PCI-E NVMe read-intensive SFF 2.5-inch SC2 SSD. It is designed for use in HPE servers and storage systems. This SSD is built with a NVMe interface which is designed to deliver high-performance storage with faster data access and transfer speeds than SATA or SAS interfaces.
Compared to other SSDs, the HPE 765069-001 offers a large capacity of 2TB in a small form factor (SFF) 2.5-inch drive. Additionally, it uses the PCI-E interface which provides faster data transfer speeds than SATA or SAS interfaces.
Compared to other types of storage solutions such as network-attached storage (NAS) or storage area networks (SAN), the HPE 765069-001 offers faster access to stored data, but may not offer the same level of data redundancy and availability.
In comparison with other NVMe drives, the HPE 765069-001 may not have the same level of random write IOPS performance and will have a lower write endurance than other NVMe drives. However, it will have a higher read performance and endurance.
Performance Benchmarks
Performance benchmarks for the 765069-001 HPE 2TB PCI-E Nvme Read Intensive SFF 2.5-inch SC2 SSD will vary depending on the specific use case and system configuration. However, some general performance specifications for this drive include:
- Sequential read and write speeds of up to 3.2GB/s and 1.4GB/s respectively
- Random read and write speeds of up to 700,000 IOPS and 35,000 IOPS respectively
- Latency of less than 100 microseconds
It is important to note that these are maximum performance specifications and actual performance may vary depending on the system configuration and workload.
Additionally, HPE 765069-001 is designed to handle read-intensive workloads, which means it is optimized to deliver high read performance and endurance. It will have better read performance than other NVMe drives, but not as good write performance.
It is also important to note that, HPE 765069-001 can be used in different HPE Servers, so the performance will also be affected by the type of the server, the processor, the memory and other components of the system.
Compatibility With Various Server Models
The 765069-001 HPE 2TB PCI-E Nvme Read Intensive SFF 2.5-inch SC2 SSD is designed for use in HPE servers and storage systems. It is compatible with a wide range of HPE server models, including:
- HPE ProLiant DL Servers: DL360, DL380, DL560, DL580, DL385, DL388, DL560 Gen9, DL580 Gen9, DL385 Gen10, DL388 Gen10
- HPE ProLiant BL Servers: BL460c, BL660c
- HPE Synergy: Compute Module, Storage Module
- HPE Apollo: 4200, 6500, 6600
It is important to note that the compatibility of the drive with a specific server model will also depend on the system firmware and the server’s storage controller. It is recommended to check the HPE website or consult with an HPE representative to confirm compatibility with a specific server model.
Additionally, The HPE 765069-001 is designed to work with HPE’s Smart Array Controllers, Smart HBA’s, and HPE Smart Host Bus Adapter(HBA) which are specifically designed for the HPE servers.
It is also important to ensure that the server has the proper physical storage bays to accommodate the 2.5-inch SFF form factor of the drive.
General Information
- Brand Name : HPE
- Manufacturer : Hewlett Packard
- MPN : 765069-001
- Type : Solid State Drive (SSD)
- Sub-Type : PCI-E 2TB
- SKU : 765069-001
Technical Information
- Capacity : 2 TB
- Height : 15 MM
- Length X Width : Standard SffInterface : PCI-E
Performance
- Rotational Speed :
- Random Reads : 145,000 IOPS
- Random Writes : 29,000 IOPS
- Sequential Reads : 2,500 MBPS
- Sequential Writes : 1,600 MBPS
Product Dimensions & Weight
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
