Description
Data Protection and Security Features
The 778179-001 HPE 480GB SAS 6GBPS 3Par StoreServ Non-Flash Capable Cmlc SSD is a solid-state drive designed for enterprise-level storage solutions. Here are some of the data protection and security features of this drive:
- Advanced Encryption: The drive supports hardware-based encryption using the AES 256-bit algorithm, which provides a high level of data security.
- End-to-End Data Protection: The SSD has built-in data integrity checks, including cyclic redundancy check (CRC), to ensure that data is not corrupted during transmission or storage.
- Power Loss Protection: The drive has built-in capacitors that provide enough power to the SSD to complete any ongoing operations in case of sudden power loss.
- Wear Leveling: The SSD has wear-leveling technology that evenly distributes write operations across all cells to ensure that the cells wear out at an even rate, thereby prolonging the life of the drive.
- S.M.A.R.T. Monitoring: The SSD supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) which monitors the drive’s health status, and alerts the user of any potential failures or issues.
- RAID Support: The drive supports RAID (Redundant Array of Independent Disks), which provides data redundancy and protects against data loss in case of drive failure.
Power Consumption and Energy Efficiency
The power consumption and energy efficiency of the 778179-001 HPE 480GB SAS 6GBPS 3Par StoreServ Non-Flash Capable CMLC SSD can vary depending on a number of factors such as workload, system configuration, and environmental conditions. However, here are some general information and specifications that can help provide an idea of the power consumption and energy efficiency of this drive:
- Power consumption: The maximum power consumption of the HPE 480GB SAS SSD is rated at 3.3 Watts when idle and up to 6.3 Watts under a typical workload.
- Energy efficiency: The HPE 480GB SAS SSD is designed to be highly energy-efficient, with a power usage effectiveness (PUE) rating of less than 1.5.
It’s worth noting that these figures represent the power consumption and energy efficiency of the drive alone and don’t take into account the power draw of other system components such as CPUs, memory, or storage controllers.
High Read/Write Speeds
The 778179-001 HPE 480GB SAS 6GBPS 3Par StoreServ Non-Flash Capable Cmlc SSD is designed to deliver high read/write speeds, making it suitable for use in enterprise-level storage solutions that require high performance and reliability. Here are some of the read/write speed specifications of this SSD:
- Sequential Read/Write Speeds: The 778179-001 HPE SSD has a sequential read speed of up to 500 MB/s and a sequential write speed of up to 460 MB/s. This means that the drive can read or write large files quickly and efficiently.
- Random Read/Write Speeds: The drive has a random read speed of up to 95,000 IOPS (Input/Output Operations Per Second) and a random write speed of up to 25,000 IOPS. This means that the SSD can handle a large number of small read/write operations, such as those commonly performed in databases or virtualized environments.
- Low Latency: The SSD has a low latency of less than 150 microseconds, which means that it can quickly respond to read/write requests, and deliver high performance in demanding environments.
- 6Gbps SAS Interface: The drive supports a 6Gbps SAS (Serial Attached SCSI) interface, which provides high data transfer rates and low latency.
General Information
- Manufacturer : HPE
- MPN: 778179-001
- Type: Solid State Drive (SSD)
Key Features
- Capacity : 480 GB
- Form Factor : 2.5 Sff
- Interface : SAS-6GBPS
- Data Transfer Rate : 600 MBPS
Dimensions & Weight
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
