Description
Performance and Reliability
The HPE 789157-B21 is a 960GB SATA 6GBPS Read Intensive SSD, which is optimized for workloads that involve a high proportion of read operations, such as data warehousing and online transaction processing.
In terms of performance, the drive has a sequential read speed of up to 540MB/s, which allows for quick access to large amounts of data. Sequential write speed is up to 500MB/s, which allows fast data transfer to the drive. This makes it a suitable choice for read-intensive workloads where fast data access is important.
In terms of reliability, the HPE 789157-B21 is built with advanced NAND flash memory, which is known for its high durability and reliability. The drive has a mean time between failures (MTBF) of 2 million hours, which means it is expected to function for a very long time without failure. This is important for maintaining the uptime of the system in which it is installed. Additionally, the drive also comes with a 3-year limited warranty which provides a peace of mind.
The HPE 789157-B21 also comes with advanced error correction and data retention technologies, which provide a high level of protection against data loss and corruption in the event of a power failure or other types of unexpected events. This is important for maintaining the integrity of the data stored on the drive.
Compatibility With HPE Servers and Storage Systems
The HPE 789157-B21 SSD is specifically designed for use in HPE ProLiant Gen9 servers and storage systems. This means that it has been tested and is fully compatible with these systems, and should work seamlessly with them. The drive interface is compatible with the 6GB/s SATA interface that is supported by the Gen9 servers and storage systems.
It’s important to note that while the HPE 789157-B21 may physically fit into servers and storage systems that are not Gen9, it may not be fully compatible and could lead to issues with performance and reliability. Therefore, it is important to confirm compatibility before installing this drive in any system. Additionally, you should also check the firmware version of your server or storage system, to ensure it’s compatible with the drive.
It’s recommended to check the HPE’s Product compatibility matrix to confirm the compatibility of the HPE 789157-B21 SSD with your specific server or storage system. This can usually be found on the HPE’s website or by contacting HPE’s support team.
Troubleshooting and Technical Support
HPE 789157-B21 is a 960GB SATA 6GBPS Read Intensive SSD. If you are experiencing issues with this SSD, there are a few things you can try for troubleshooting and technical support:
- Check the device’s connection to the motherboard or controller. Make sure it is securely seated and that the cables are properly connected.
- Check the device’s firmware and driver versions. Make sure they are up-to-date and compatible with your system.
- Check the device’s SMART status. This will give you information on the health of the SSD, such as its temperature, wear level, and error counts.
- Check the system’s event logs for any error messages related to the SSD.
- Run a diagnostic test on the SSD.
If none of these steps resolve the issue, it may be necessary to contact HPE technical support for further assistance. They may ask for the serial number of the SSD and any error messages or log files you have collected.
Product Information about this HPE 789157-B21
- Manufacturer: HPE
- Part Number or SKU# 789157-B21
- Type: Solid State Drive (SSD)
- SSD Type: SATA-6GBPS
Key Feature of 960GB Solid State Drive
- Device Type: Hot Swap Solid State Drive
- Nand Flash Memory Type: Multi level Cell (MLC)
- Form Factor: 3.5 Inch
- Capacity: 960GB Storage Drive
- Plug Type: Hot Pluggable
- Workload Type: Read Intensive
Product Dimensions & Weight for SATA 6GBPS SSD
- Height: 5.63 inch
- Width: 3.75 inch
- Depth: 7.00 inch
- Weight: 1.35 lbs
Compatibility
- HPE ProLiant DL Series: DL20 (Gen9) DL60 (Gen9) DL80 (Gen9) DL120 (Gen8 Gen9) DL160 (Gen8 Gen9) DL180 (Gen8 Gen9) DL320e (Gen8 Gen9) DL360e (Gen8 Gen9) DL360p (Gen8 Gen9) DL380e (Gen8 Gen9) DL380p (Gen8 Gen9) DL388 (Gen9)
- HPE ProLiant ML Series: ML110 (Gen8 Gen9) ML150 (Gen8 Gen9) ML310e (Gen8 Gen9) ML350 (Gen8 Gen9) ML350e (Gen8 Gen9)
- HPE ProLiant SL Series: SL200t (Gen8 Gen9) SL230s (Gen8 Gen9) SL250s (Gen8 Gen9) SL2500 SL4550 (Gen8 Gen9) SL4545 (Gen8 Gen9) SL454x
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
