Description
Endurance and Reliability
Endurance refers to the ability of an SSD to withstand a certain amount of write cycles before its performance begins to degrade. The HPE 800GB SAS 6Gbps Hot Plug Power Loss Protection Light Endurance SSD (792227-B21) is designed for use in write-intensive applications and has a higher endurance level than standard endurance SSDs, meaning it can withstand a greater number of write cycles before its performance begins to degrade.
Reliability refers to the ability of an SSD to perform as expected and to retain data without failure. The Power Loss Protection feature of the 792227-B21 SSD helps protect against data loss in the event of a power outage by preserving the integrity of data in the SSD’s cache. This feature along with the build quality and the testing done by HPE before shipment make this drive to have a very high reliability level.
Operating Temperature and Humidity
The operating temperature range for the HPE 800GB SAS 6Gbps Hot Plug Power Loss Protection Light Endurance SSD (792227-B21) is between 0 and 60 degrees Celsius (32 and 140 degrees Fahrenheit). This means that the SSD should be used in environments where the ambient temperature falls within this range.
The operating humidity range for this SSD is between 8 and 90% relative humidity, non-condensing. This means that the SSD should be used in environments where the relative humidity falls within this range and no condensation occurs.
It’s important to note that these are the recommended operating temperature and humidity ranges for the SSD and operating outside of these ranges could result in decreased performance or even damage to the SSD.
Hot Plugging Capabilities
Hot plugging refers to the ability to connect or disconnect a device while the system is powered on, without causing any interruption or damage to the system or the device. The HPE 800GB SAS 6Gbps Hot Plug Power Loss Protection Light Endurance SSD (792227-B21) is designed with hot plugging capabilities, meaning it can be connected or disconnected while the system is powered on, without causing any interruption or damage to the system or the device.
This allows for easy maintenance and upgrades in data center environments, where downtime needs to be minimized. It also allows for easy replacement of faulty or failing drives without the need to power off the system.
It’s important to note that the system and the backplane must also support hot plugging in order to use this feature, and the proper procedures for hot plugging must be followed to prevent any damage to the system or the device.
General Information
- Manufacturer: Hewlett Packard Enterprise (HPE)
- MPN : 792227-B21
- Type : Solid State Drive (SSD)
- Sub Type : SAS-6GBPS
- SKU : 792227-B21
Technical Information
- Storage Capacity: 800 GB
- Drive Interface: SAS 6GBPS
- Compatible Drive Bay: 2.5inch SSF
Dimensions & Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
