805351-64G HPE 64GB Cas-17 DDR4 SDRAM 288-Pin 2400MHZ PC4-19200 Ram | Brand New 3 Years Warranty

Description

Comparison with Other Types of Memory

DDR4 SDRAM is one of several types of memory that are currently available. Here is a comparison of some of the main features of DDR4 SDRAM with other types of memory:

• DDR3 SDRAM: DDR4 SDRAM is the successor to DDR3 SDRAM and offers several performance benefits over it, including faster data transfer rates, lower power consumption, and improved reliability and durability.
• RDRAM (Rambus DRAM): RDRAM is a type of memory that uses a different technology than DDR SDRAM, and is generally considered to be faster than DDR3 but typically less available and more expensive.
• SDRAM (Synchronous DRAM): SDRAM is an older type of memory that is not as fast as DDR4 SDRAM, but it is still used in some older systems.
• SRAM (Static RAM): SRAM is a type of memory that is faster than DRAM, but it is also more expensive and typically used in smaller capacities, such as cache memory.
• NAND Flash: NAND flash is commonly used in solid state drives (SSD) and USB drives. It has better power consumption, faster read and write speeds than DRAM, but it is volatile, meaning that it loses data when power is shut down.

It’s important to note that different types of memory are suited for different applications and tasks, so it’s essential to carefully consider the specific requirements of your system when choosing a type of memory.

Installation and Setup Instructions for the HPE 64GB DDR4 SDRAM

THere are the general steps for installing and setting up the HPE 64GB DDR4 SDRAM in a computer:

1. Turn off the computer and unplug it from the power source.
2. Remove the computer’s case to access the motherboard.
3. Locate the memory slots on the motherboard. DDR4 memory typically uses a 288-pin DIMM (Dual In-line Memory Module) slot.
4. Carefully align the notches on the memory module with the notches in the memory slot, then firmly press the module into the slot.
5. Once the module is securely seated in the slot, press down on the tabs on either side of the module to lock it in place.
6. Repeat the process to install additional memory modules as needed.
7. Once all memory modules are installed, replace the computer’s case and plug it back in to the power source.
8. Turn on the computer and enter the BIOS or UEFI setup utility to check the memory configuration.
9. Ensure that the computer has recognized the new memory and that it is configured to use the correct memory speed and timings.
10. Save the changes and exit the BIOS or UEFI setup utility.
11. Boot the computer into the operating system and use system information utilities to confirm the total amount of installed memory.

It’s important to note that the installation process may vary depending on the specific model of computer you are using, so be sure to consult the computer’s documentation or the HPE website for specific instructions. Also, it’s always important to handle the memory modules with care to avoid any damage or static discharge.

Frequently Asked Questions About the HPE 64GB DDR4 SDRA

• What is the maximum amount of memory that my computer can support? The maximum amount of memory that a computer can support depends on the specific model of the computer and the motherboard. You can check the computer’s documentation or the HPE website for more information on the memory specifications.
• Is it necessary to install memory in pairs? It is not necessary to install memory in pairs, but it is recommended for optimal performance. When installing memory in pairs, it is important to ensure that the memory modules are the same capacity and have the same speed and timings.
• Can I mix different types of memory (DDR4 and DDR3) in the same computer? It is not recommended to mix different types of memory in the same computer as it may cause compatibility issues. It’s important to use memory modules that are the same type and have the same speed and timings.
• Can I use the HPE 64GB DDR4 SDRAM in a laptop? It depends on the specific model of laptop and the memory specifications. It’s important to check the laptop’s documentation or the HPE website to confirm compatibility before purchasing.
• Will installing more memory improve the performance of my computer? Installing more memory can help to improve the performance of a computer, particularly if the computer is frequently running low on memory. However, it’s not always the case that more memory equals better performance, as other factors such as CPU and storage speed play a role as well.
• How can I check the amount of memory installed in my computer? You can check the amount of memory installed in your computer by using system information utilities or by checking the BIOS or UEFI setup utility during startup.

General Information

• Manufacturer: HPE
• Manufacturer Part Number: 805351-64G
• Type: Memory (RAM)
• Sub-Type: PC4-19200
• Product Name: 64GB DDR4 SDRAM Memory Module

Technical Information

• Storage Capacity: 64GB
• Memory Technology: DDR4 SDRAM
• Number Of Modules: 2 X 32GB
• Bus Speed: 2400mhz DDR4-2400/PC4-19200
• Data Integrity Check: Ecc
• Signal Processing: Registered
• Cas Latency Timings: Cl17
• Features: 2rx4

Compatibility

• Apollo 2000/Apollo 4200/Apollo 45
• 00/Apollo 8000/Bl460c Gen9
• Dl60 Gen9/Dl80 Gen9/Dl120 Gen9/Dl160 Gen9/Dl180 Gen9
• Dl360 Gen9/Dl380 Gen9/Dl388 Gen9(Bto)/Ml110 Gen9
• Ml150 Gen9/Ml350 Gen9/
• Synergy 480 Gen9