Description
Compatibility
with Servers and Workstations
The HPE 128GB 2400Mhz DDR4 SDRAM memory module is designed to be compatible with a wide range of servers and workstations. The 288-pin DIMM form factor, which the module uses, is the standard for DDR4 memory and is widely adopted in servers and workstations. Additionally, the module’s ECC support, memory capacity and speed make it suitable for use in environments where high-speed data processing, large data sets, and high-demand applications are required.
However, it is important to check the memory compatibility with the system’s motherboard before installing this module. The system’s motherboard must support DDR4 memory, have enough memory slots, and the memory speed and CAS Latency must match with the module in order to work properly.
It is also important to note that some servers and workstations may have specific memory requirements, such as a specific memory capacity or speed, so it is important to consult the documentation for the system before installing the HPE 128GB 2400Mhz DDR4 SDRAM memory module.
Power Consumption and Reliability
The HPE 128GB 2400Mhz DDR4 SDRAM memory module is designed to consume less power than its predecessor DDR3 memory. DDR4 memory typically consumes 1.2 volts compared to DDR3’s 1.5 volts, this means that it will consume less power, generate less heat, and therefore require less cooling. This can result in energy savings for the system and can extend the life of the memory module.
The HPE 128GB 2400Mhz DDR4 SDRAM memory module is also designed to be highly reliable. The module uses ECC technology to detect and correct single-bit memory errors, which helps to prevent system crashes and data corruption. This memory module is also built to withstand the rigors of server and workstation environments, and it is rigorously tested to ensure that it can operate reliably in demanding conditions.
Upgrade and Installation Instruction
To upgrade or install the HPE 128GB 2400Mhz DDR4 SDRAM memory module, you will need to follow these basic steps:
- Make sure that the system is powered off and unplugged.
- Open the system’s case and locate the memory slots on the motherboard.
- Carefully remove any existing memory modules from the memory slots by pressing down on the tabs on either side of the module and then gently pulling the module out of the slot.
- Carefully align the notches on the HPE 128GB 2400Mhz DDR4 SDRAM memory module with the notches in the memory slot, then gently push the module into the slot. The tabs on either side of the module should lock into place to secure the module.
- Repeat the previous step for any additional memory modules you are installing.
- Close the system’s case and plug the system back in.
- Power on the system and check the BIOS or system configuration utility to ensure that the new memory is recognized and that the correct amount of memory is displayed.
It’s also important to check the memory compatibility with the system’s motherboard before installing this module. It’s also recommended to consult the system documentation or the manufacturer’s website for more detailed installation instructions.
Performance
Benefits of Using HPE 128GB DDR4 SDRA
The HPE 128GB 2400Mhz DDR4 SDRAM memory module provides several performance benefits for servers and workstations.
- Increased memory capacity: The HPE 128GB DDR4 SDRAM memory module provides a significant increase in memory capacity compared to smaller memory modules. This allows for larger data sets to be processed, and more applications to be run concurrently.
- Faster memory speed: The HPE 128GB DDR4 SDRAM memory module operates at a speed of 2400Mhz which is faster than DDR3 memory, this results in faster data access and processing.
- Improved energy efficiency: The HPE 128GB DDR4 SDRAM memory module consumes less power than DDR3 memory, this results in less heat generated, and therefore less cooling required. This can result in energy savings for the system.
- ECC support: The HPE 128GB DDR4 SDRAM memory module uses ECC technology to detect and correct single-bit memory errors, which helps to prevent system crashes and data corruption.
- Increased reliability: The HPE 128GB DDR4 SDRAM memory module is built to withstand the rigors of server and workstation environments and is rigorously tested to ensure that it can operate reliably in demanding conditions.
- Compatibility: The HPE 128GB DDR4 SDRAM memory module is designed to be compatible with a wide range of servers and workstations. The 288-pin DIMM form factor, which the module uses, is the standard for DDR4 memory and is widely adopted in servers and workstations.
General Information of this HPE 805353-128
- Brand Name: HPE
- Model Number or SKU# 805353-128
- Type: Memory (RAM)
- RAM Type: Pc4-19200
- Product Name: 128GB DDR4 SDRAM Memory Module
Technical Information about 128GB DDR4 Ram
- Storage Capacity: 128GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 4 X 32GB
- Bus Speed: 2400mhz DDR4-2400/PC4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl17
- Features: 2rx4
- Form Factor: 288-Pin Dimm
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility for 128GB DDR4 Ram
- HPE Proliant Bl460c Gen9
- HPE Proliant Bl660c Gen9
- HPE Proliant Dl180 Gen9
- HPE Proliant Dl360 Gen9
- HPE Proliant Dl380 Gen9
- HPE Proliant Dl388 Gen9
- HPE Proliant Dl560 Gen9
- HPE Proliant Dl580 Gen9
- HPE Proliant Dl60 Gen9
- HPE Proliant Dl80 Gen9
- HPE Proliant Ml110 Gen9
- HPE Proliant Ml150 Gen9
- HPE Proliant Ml350 Gen9
- HPE Proliant Dl120 Gen9
- HPE Proliant Dl160 Gen9
- HPE Proliant Xl170r Gen9
- HPE Proliant Xl190r Gen9
- HPE Proliant Xl230a Gen9
- HPE Proliant Xl250a Gen9
- HPE Proliant 4xxl170r Gen9
- HPE Proliant Xl230b Gen9
- HPE Proliant Ws460c Gen9
- HPE Apollo 2000
- HPE Apollo 4200
- HPE Apollo 4500
- HPE Apollo 6000
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.