Description
Introduction to the HPE 128GB 2400Mhz DDR4 SDRAM
The HPE 128GB 2400Mhz DDR4 SDRAM (part number 805353-128) is a high-performance memory module designed for use in servers and workstations. It offers a large memory capacity of 128GB, allowing for high-demand applications to run smoothly with adequate memory resources. The memory module operates at a speed of 2400Mhz, which is faster than the previous generation DDR3 memory, providing faster data transfer rates and improved overall system performance. The module uses the 288-pin DIMM form factor, which is the standard for DDR4 memory modules and is compatible with a wide range of servers and workstations. Additionally, it utilizes ECC (Error Correcting Code) technology which detects and corrects single-bit memory errors to ensure data integrity and stability.
Memory Capacity and Speed
The HPE 128GB 2400Mhz DDR4 SDRAM memory module has a large memory capacity of 128GB, providing ample resources for high-demand applications and large data sets. This allows for smoother multitasking and improves the overall performance of the system.
The memory module operates at a speed of 2400Mhz, which is faster than the previous generation DDR3 memory. This higher speed allows for faster data transfer rates and improved overall system performance. The faster data transfer rates of DDR4 memory allows the system to process and access information more quickly, resulting in faster application load times and improved system responsiveness. The faster memory speed also allows for better performance in applications that require high memory bandwidth such as video editing, rendering, and scientific simulations.
CAS Latency and ECC Support
The HPE 128GB 2400Mhz DDR4 SDRAM memory module has a CAS latency of 17, which refers to the number of clock cycles that pass before data is available to the system after a memory command is issued. A lower CAS latency means that the memory can access data more quickly, resulting in improved performance. A CAS latency of 17 is considered standard for DDR4 memory and is similar to that of other DDR4 memory modules.
The memory module also supports ECC (Error Correcting Code) technology, which detects and corrects single-bit memory errors. This ensures that data integrity is maintained and helps to prevent system crashes and data corruption. ECC memory is commonly used in servers and workstations where data integrity and reliability are of the utmost importance.
288-Pin DIMM Form Factor
The HPE 128GB 2400Mhz DDR4 SDRAM memory module uses the 288-pin DIMM (Dual In-line Memory Module) form factor. This is the standard form factor for DDR4 memory modules and is designed to be compatible with a wide range of servers and workstations. The 288-pin DIMM form factor is an improvement over the previous generation DDR3 memory, which used the 240-pin DIMM form factor. The 288-pin form factor allows for increased memory bandwidth and higher memory speeds, which results in improved performance.
The 288-pin DIMM form factor also features a key notch and a notch, which are used to ensure that the memory module is inserted in the correct orientation and to prevent damage to the module or the system.
The 288-pin DIMM form factor is widely adopted, this allows for easy upgrade and replacement of memory in servers and workstations. It is important to check the memory compatibility with the system’s motherboard before installing this module.
General Information of this HPE 805353-128
- Brand Name: HPE
- Model Number or SKU# 805353-128
- Type: Memory (RAM)
- RAM Type: Pc4-19200
- Product Name: 128GB DDR4 SDRAM Memory Module
Technical Information about 128GB DDR4 Ram
- Storage Capacity: 128GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 4 X 32GB
- Bus Speed: 2400mhz DDR4-2400/PC4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl17
- Features: 2rx4
- Form Factor: 288-Pin Dimm
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility for 128GB DDR4 Ram
- HPE Proliant Bl460c Gen9
- HPE Proliant Bl660c Gen9
- HPE Proliant Dl180 Gen9
- HPE Proliant Dl360 Gen9
- HPE Proliant Dl380 Gen9
- HPE Proliant Dl388 Gen9
- HPE Proliant Dl560 Gen9
- HPE Proliant Dl580 Gen9
- HPE Proliant Dl60 Gen9
- HPE Proliant Dl80 Gen9
- HPE Proliant Ml110 Gen9
- HPE Proliant Ml150 Gen9
- HPE Proliant Ml350 Gen9
- HPE Proliant Dl120 Gen9
- HPE Proliant Dl160 Gen9
- HPE Proliant Xl170r Gen9
- HPE Proliant Xl190r Gen9
- HPE Proliant Xl230a Gen9
- HPE Proliant Xl250a Gen9
- HPE Proliant 4xxl170r Gen9
- HPE Proliant Xl230b Gen9
- HPE Proliant Ws460c Gen9
- HPE Apollo 2000
- HPE Apollo 4200
- HPE Apollo 4500
- HPE Apollo 6000
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.