Description
System Requirements for HPE 192GB DDR4 SDRA
In order to use HPE 192GB DDR4 SDRAM in a computer system, there are certain requirements that must be met:
- Motherboard Compatibility: The motherboard must have DDR4 memory slots and be compatible with the memory’s speed and voltage specifications.
- BIOS/UEFI: The system’s BIOS or UEFI firmware must be updated to support DDR4 memory.
- CPU: The CPU must support DDR4 memory.
- Operating System: The operating system must be compatible with the memory’s speed and capacity.
- Power Supply: The power supply must be able to provide enough power to support the additional memory.
It is also important to note that some systems may have a maximum amount of memory that can be installed, and that adding more memory than the maximum supported by the system may result in decreased performance. It’s always a good idea to consult the system’s documentation or contact the manufacturer for specific memory requirements and compatibility information.
Once all the above requirements are met, the HPE 192GB DDR4 SDRAM can be installed and configured in the system for optimal performance.
Technical
Specification of HPE 192GB DDR4 SDRAM
The technical specifications of HPE 192GB DDR4 SDRAM can vary depending on the specific model and manufacturer, but some common specifications for DDR4 memory include:
- Memory Type: DDR4 SDRAM
- Capacity: 192GB
- Form Factor: DIMM (Dual In-line Memory Module)
- Memory Speed: 2133 MHz, 2400 MHz, 2666 MHz, 2933 MHz, 3200 MHz or higher
- Error Correction Code (ECC): ECC or Non-ECC
- CAS Latency: CL15, CL16, CL17, CL19 or higher
- Voltage: 1.2V or 1.35V
- Data Transfer Rate: The data transfer rate of DDR4 is measured in MT/s (Mega Transfers per second) or Gb/s (Gigabits per second).
- Registered or Unbuffered: Registered (also known as buffered) memory has a register between the DRAM modules and the memory controller, which helps to improve signal integrity and allows for more memory modules to be used. Unbuffered memory does not have a register, which makes it less expensive but also less stable in certain configurations.
Keep in mind that these specs may vary depending on the specific memory kit and the manufacturer. It’s always recommended to check the product’s documentation or consult the manufacturer for the most accurate specifications.
Tips
for Optimizing Performance with HPE 192GB DDR4 SDRA
There are several steps that can be taken to optimize performance when using HPE 192GB DDR4 SDRAM in a computer system:
- Ensure proper compatibility: Make sure that the memory is compatible with the motherboard, CPU, and operating system.
- Update firmware and drivers: Keep the system’s firmware and drivers up-to-date to ensure that the memory is being used to its full potential.
- Use matching memory modules: Use memory modules of the same speed, capacity, and type to ensure that they can work together in dual-channel or quad-channel mode.
- Set the correct memory speed: Make sure that the memory speed is set correctly in the system’s BIOS or UEFI firmware.
- Overclock with caution: Overclocking memory can result in improved performance, but it can also cause system instability and may void the warranty. Overclock only if you have proper cooling and know what you are doing.
- Monitor memory usage: Use system monitoring tools to keep an eye on memory usage, and close any unnecessary programs or processes that are consuming large amounts of memory.
- Optimize the system: Optimize the system by disabling unnecessary services and programs, and by installing software that can improve memory management.
- Keep your system clean and cool: Keep your system clean and cool, as high temperatures can cause memory errors and system crashes.
By following these tips, you can help to ensure that your system is running at its best with HPE 192GB DDR4 SDRAM.
General Information of this HPE 805353-192
- Brand Name: HPE
- Model Number or SKU# 805353-192
- Type: Memory (RAM)
- RAM Type: Pc4-19200
- Product Name: 192GB DDR4 SDRAM Memory Module
Technical Information about 192GB DDR4 Ram
- Storage Capacity: 192GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 6 X 32GB
- Bus Speed: 2400mhz DDR4-2400/PC4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl17
- Features: 2rx4
- Form Factor: 288-Pin Dimm
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility for 192GB DDR4 Ram
- Apollo 4520 Gen9, Proliant Dl120 Gen9, Dl160 Gen9, Dl180 Gen9, Dl360 Gen9, Dl380 Gen9, Dl388 Gen9, Dl60 Gen9, Dl80 Gen9, Ml110 Gen9, Ml150 Gen9, Ml350 Gen9, Ws460c Gen9, Xl190r Gen9, Xl230a Gen9, Xl250a Gen9, Synergy 660 Gen9
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
