Description
Upgrade and Installation Instructions
The HPE 192GB 2400Mhz DDR4 SDRAM memory module requires specific upgrade and installation instructions to ensure that it is installed correctly and functions properly. Below are some general steps for installing the HPE 192GB DDR4 SDRAM memory module in a server or workstation.
- Check for compatibility: Before installing the HPE 192GB DDR4 SDRAM memory module, ensure that it is compatible with the server or workstation. Check the system’s documentation or specifications to confirm that it can support DDR4 memory and that it has enough free memory slots to accommodate the additional memory.
- Power off the system: Before installing the HPE 192GB DDR4 SDRAM memory module, shut down the server or workstation and unplug it from the power source.
- Open the system: Locate the memory compartment and remove the cover to access the memory slots.
- Insert the memory module: Align the memory module with the memory slot and press down firmly to seat the module securely in the slot. Make sure the module is fully seated and that the locking tabs are securely in place.
- Repeat the process for additional memory modules: If the system has multiple memory slots, repeat the process for each additional memory module.
- Close the system: Replace the cover and secure it in place.
- Power on the system: Plug the server or workstation back in and turn it on.
- Verify the memory installation: Once the system is up and running, check the system properties or use a diagnostic tool to verify that the new memory has been recognized and is functioning properly.
It is important to note that these are general instructions and the specific instructions may vary depending on the server or workstation model. It is recommended to consult the system’s documentation or consult with a qualified technician before upgrading the memory.
Performance Benefits of Using HPE 192GB DDR4 SDRAM
HPE 192GB DDR4 SDRAM (Synchronous Dynamic Random Access Memory) offers several performance benefits over earlier generations of memory such as DDR3. Some of these benefits include:
- Higher Data Transfer Rates: DDR4 operates at faster speeds than DDR3, resulting in improved performance when transferring data between the memory and the CPU.
- Increased Bandwidth: DDR4 has a wider memory bus than DDR3, which allows for more data to be transferred at a time. This results in higher performance when using multiple data-intensive applications at the same time.
- Reduced Power Consumption: DDR4 uses less power than DDR3, which can help to reduce operating costs and extend the life of the memory.
- Increased Capacity: DDR4 can support higher memory densities than DDR3, which means that more memory can be installed in a single system. This can be particularly beneficial for high-performance computing applications that require large amounts of memory.
Comparison with Other Types of Memory
In addition to comparing DDR4 to DDR3, it is also useful to compare it to other types of memory. Some other types of memory that are commonly used in computing include:
- SRAM (Static Random Access Memory): SRAM is faster and more expensive than DRAM (Dynamic Random Access Memory) such as DDR4, but it is also less dense and therefore requires more physical space to store the same amount of data. SRAM is often used in cache memory, which acts as a buffer between the CPU and main memory.
- NAND Flash: NAND flash is a type of non-volatile memory that is commonly used in solid-state drives (SSDs). NAND flash offers faster access times than traditional hard disk drives (HDDs), but it is also more expensive and has a limited number of write cycles.
- DRAM: DDR4 is a type of DRAM. It is the most common type of memory used in PCs, laptops, and servers. It is relatively inexpensive and widely available, but it is also slower than SRAM and has a limited lifespan.
General Information of this HPE 805353-192
- Brand Name: HPE
- Model Number or SKU# 805353-192
- Type: Memory (RAM)
- RAM Type: Pc4-19200
- Product Name: 192GB DDR4 SDRAM Memory Module
Technical Information about 192GB DDR4 Ram
- Storage Capacity: 192GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 6 X 32GB
- Bus Speed: 2400mhz DDR4-2400/PC4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl17
- Features: 2rx4
- Form Factor: 288-Pin Dimm
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility for 192GB DDR4 Ram
- Apollo 4520 Gen9, Proliant Dl120 Gen9, Dl160 Gen9, Dl180 Gen9, Dl360 Gen9, Dl380 Gen9, Dl388 Gen9, Dl60 Gen9, Dl80 Gen9, Ml110 Gen9, Ml150 Gen9, Ml350 Gen9, Ws460c Gen9, Xl190r Gen9, Xl230a Gen9, Xl250a Gen9, Synergy 660 Gen9
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.