Description
Compatibility with various Servers and Motherboard
HPE 64GB DDR4 RAM is generally compatible with servers and motherboards that support DDR4 memory. However, it’s important to check the specific specifications of the server or motherboard to ensure that it can support the amount of RAM and the type of memory slots (DIMM) required for this particular module.
For example, the server or motherboard should have enough memory slots and support for the right memory voltage and speed. It’s also important to check if the server or motherboard is compatible with HPE memory specifically, as some systems may have limitations or restrictions on the type of memory that can be used.
It’s also important to check if the server or motherboard support ECC (Error-Correcting Code) memory as HPE 64GB DDR4 RAM is ECC module. ECC memory helps to detect and correct errors that can occur in memory operations, which is important for systems that need to maintain data integrity and availability.
It’s recommended to check the server or motherboard manual or the vendor website for more information on memory compatibility.
Installation and Setup of HPE 64GB DDR4 RAM
Installing HPE 64GB DDR4 RAM in a server or motherboard involves the following general steps:
- Power off the system and unplug it from the electrical outlet.
- Remove the cover or access panel to access the memory slots.
- Locate the memory slots on the motherboard. They are typically located near the CPU and are labeled DIMM.
- Carefully release the locking tabs on the memory slots.
- Carefully align the HPE 64GB DDR4 RAM module with the memory slot and gently press down until the module is securely seated in the slot.
- Secure the locking tabs to hold the module in place.
- Replace the cover or access panel and plug the system back in.
- Turn on the system and enter the system BIOS or UEFI firmware settings to verify that the new RAM is recognized and that the system is configured to use it correctly.
It’s important to handle the memory modules with care, to avoid any damage and to wear an electrostatic discharge wrist strap when handling memory modules.
How HPE 64GB DDR4 RAM Improves System Performance
Increasing the amount of RAM in a computer system can improve performance by allowing the system to store more data in memory. This can lead to faster access times for frequently used data and reduce the need for the system to retrieve data from slower storage devices like hard drives or solid state drives. In the case of HPE 64GB DDR4 RAM specifically, it would provide a significant increase in memory capacity compared to a system with less RAM, potentially allowing the system to handle more demanding applications or larger data sets without experiencing performance bottlenecks. Additionally, DDR4 RAM is faster and more power-efficient than its predecessor DDR3.
General Information
- Brand: HPE
- Manufacturer Part Number: 809085-591
- Type: Memory (RAM)
- Sub-Type: PC4-19200
- Product Name: 64GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 64GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 64GB
- Bus Speed: 2400mhz DDR4-2400/PC4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl17
- Features: 4rx4
Physical Characteristics
- Form Factor: 288-Pin Lrdimm
Compatibility
- HPE Proliant Bl460c Gen9
- HPE Proliant Bl660c Gen9
- HPE Proliant Dl180 Gen9
- HPE Proliant Dl360 Gen9
- HPE Proliant Dl380 Gen9
- HPE Proliant Dl388 Gen9
- HPE Proliant Dl560 Gen9
- HPE Proliant Dl580 Gen9
- HPE Proliant Dl60 Gen9
- HPE Proliant Dl80 Gen9
- HPE Proliant Ml110 Gen9
- HPE Proliant Ml150 Gen9
- HPE Proliant Ml350 Gen9
- HPE Proliant Dl120 Gen9
- HPE Proliant Dl160 Gen9
- HPE Proliant Xl170r Gen9
- HPE Proliant Xl190r Gen9
- HPE Proliant Xl230a Gen9
- HPE Proliant Xl250a Gen9
- HPE Proliant 4xxl170r Gen9
- HPE Proliant Xl230b Gen9
- HPE Proliant Ws460c Gen9
- HPE Apollo 2000
- HPE Apollo 4200
- HPE Apollo 4500
- HPE Apollo 6000