Description
Installation and Configuration Process
The installation and configuration process for the 816551-001 HPE 1GB 4Port Network Adapter involves several steps, including:
- Hardware Installation: The first step is to physically install the network adapter into the available PCI Express slot on the HPE server. The adapter should be properly seated in the slot, and any necessary power cables should be connected.
- Driver Installation: After the hardware installation, the next step is to install the appropriate driver for the adapter. The driver can be downloaded from the HPE website or included with the operating system.
- Configuration: Once the driver is installed, the adapter can be configured. This involves setting up network settings, such as IP address, subnet mask, and default gateway.
- Teaming and Load Balancing: If desired, the adapter can be configured for teaming and load balancing. This involves grouping multiple adapters together to improve network performance and redundancy.
- Quality of Service (QoS): The adapter can also be configured for Quality of Service (QoS), which prioritizes certain types of network traffic to ensure a consistent level of service.
- Testing: Finally, the adapter should be tested to ensure that it is functioning properly and providing the expected level of network performance. This can involve running network throughput tests or other diagnostic tools.
The installation and configuration process for the 816551-001 HPE 1GB 4Port Network Adapter is relatively straightforward and can typically be completed with minimal technical expertise. However, it is important to follow the manufacturer’s instructions carefully and ensure that the adapter is configured correctly to avoid potential network issues.
Network Connectivity and Topology
The 816551-001 HPE 1GB 4Port Network Adapter provides four Gigabit Ethernet ports for network connectivity. Each port supports a maximum data transfer rate of 1 Gbps, providing a total of 4 Gbps of bandwidth for the adapter.
The network topology for the adapter can vary depending on the specific use case and network configuration. However, the adapter is designed to support a wide range of network topologies, including:
- Switched Ethernet: The adapter can be connected to a network switch using standard Ethernet cables, allowing for connectivity to other network devices such as servers, workstations, and storage systems.
- VLANs: The adapter can also be configured to support Virtual Local Area Networks (VLANs), allowing for logical network segmentation and improved network performance.
- Trunking: The adapter supports link aggregation, or trunking, which allows multiple physical connections to be combined into a single logical connection for increased bandwidth and redundancy.
- Jumbo Frames: The adapter also supports jumbo frames, which allow for larger data packets to be transmitted over the network, reducing the overhead associated with smaller packet sizes and improving network performance.
The 816551-001 HPE 1GB 4Port Network Adapter is a flexible and versatile solution for network connectivity, supporting a wide range of network topologies and configurations.
Network Speed and Performance
The 816551-001 HPE 1GB 4Port Network Adapter provides a maximum data transfer rate of 1 Gbps per port, for a total of 4 Gbps of bandwidth for the adapter. This level of bandwidth is suitable for a wide range of network applications, including file sharing, email, web browsing, and basic video streaming.
The performance of the adapter is also influenced by factors such as the network topology, the type of network traffic being transmitted, and the performance of other network components such as switches and routers.
To optimize the performance of the adapter, it is important to ensure that the network is properly configured and that all network components are operating at their maximum performance levels. This may involve configuring switches and routers to support link aggregation or other advanced network features, as well as ensuring that network cables are properly installed and terminated.
The 816551-001 HPE 1GB 4Port Network Adapter provides a reliable and high-performance solution for network connectivity, with plenty of bandwidth for most network applications. However, to achieve optimal performance, it is important to ensure that the network is properly configured and that all network components are operating at their maximum performance levels.
Specifications
- Brand: HPE
- MPN: 816551-001
- Type: Networking
- Adapter-Type: Network adapter 4 Ports
- Option Part Number: 811546-B21
- Form Factor: Plug-in card – low profile
- Interface (Bus) Type: PCI Express 2.1 x4
- PCI Specification Revision: PCIe 2.1
Networking
- Ports: Gigabit Ethernet x 4
- Connectivity Technology: Wired
- Data Link Protocol: GIGE
- Data Transfer Rate: 1 GBPS
- Remote Management Protocol: SNMP
- Status Indicators: Link activity, port transmission speed
- Features: Fault tolerance, load balancing, Jumbo Frames support, PXE support, Large Send Offload (LSO), Extended Message-Signaled Interrupts (MSI-X)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1as, IEEE 802.3az
Processor / Memory
- Processor: 1 x I350 – Intel
Expansion / Connectivity
- Interfaces: 4 x Ethernet 1000 – RJ-45
- Compliant Standards: UL, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, WEEE, RoHS, FCC Part 15 A, ICES, VCCI V-3 Class A ITE
Software / System Requirements:
- OS Required: SuSE Linux Enterprise Server 11 for x86/AMD64/Intel EM64T, SuSE Linux Enterprise Server 10 for x86/AMD64/Intel EM64T, Microsoft Windows Server 2008, Microsoft Windows Server 2008 Enterprise, Microsoft Windows Server 2008 Standard, Microsoft Windows HPC Server 2008, Oracle Solaris 10, Microsoft Windows Small Business Server 2011, Red Hat Enterprise Linux 6.1, Red Hat Enterprise Linux 5.7, Citrix XenServer 6.0, VMware vSphere 5.0, VMware vSphere 4.1
Dimensions & Weight
- Depth: 5.3 inch
- Height: 2.7 inch
- Weight: 1 Ibs
Environmental Parameters
- Min Operating Temperature: 32 °F
- Max Operating Temperature: 131 °F
- Humidity Range Operating: 10 – 90% (non-condensing)
Compatibility Information
- HPE ProLiant DL Series: DL180 Gen9, DL560 Gen9, DL560 Gen9 Base, DL560 Gen9 Entry, DL560 Gen9 Performance
- HPE ProLiant ML Series: ML110 Gen9, ML110 Gen9 Base
