Description
Installation Guide for the HPE 900GB
Here is a general installation guide for the HPE 900GB 15K RPM SAS 12GBPS SFF 512E Hot Swap Hard Drive:
- Ensure that the server is powered off and unplugged from the power source.
- Locate the hard drive bays in the server. Depending on the server model, the bays may be located in the front or rear of the server.
- Remove the hard drive bay cover by unscrewing any screws or pressing any release buttons, if present.
- Slide the hard drive into the empty bay, taking care to align the connectors on the hard drive with the corresponding connectors in the bay.
- Secure the hard drive in place using the screws provided or by using any locking mechanisms present.
- Replace the hard drive bay cover and secure it in place using any screws or locking mechanisms present.
- Connect the SAS cable from the hard drive to the server’s SAS controller.
- Turn on the server and verify that the new hard drive is recognized by the server.
- If necessary, configure the hard drive in the server’s RAID controller software or operating system.
It is important to consult the server’s user manual or manufacturer’s documentation for specific instructions on how to install and configure hard drives in your server, as the installation process may vary depending on the server model and configuration.
Compatibility of the HPE 900GB
The HPE 900GB 15K RPM SAS 12GBPS SFF 512E Hot Swap Hard Drive is compatible with a wide range of HPE servers and storage systems. Here are some of the server families that are compatible with this hard drive:
- HPE ProLiant Gen8 and Gen9 servers, including DL, ML, BL, and Apollo server families.
- HPE ProLiant Gen10 servers, including DL, ML, and Apollo server families.
- HPE Synergy 480 Gen10 Compute Module.
- HPE Synergy 660 Gen10 Compute Module.
- HPE SimpliVity 380 Gen10.
Additionally, the HPE 900GB 15K RPM SAS 12GBPS SFF 512E Hot Swap Hard Drive is also compatible with a variety of HPE storage systems, including HPE 3PAR StoreServ, HPE MSA, and HPE Nimble Storage.
It is important to note that while this hard drive is designed for use in HPE servers and storage systems, it may not be compatible with other brands or models of servers and storage systems. It is always recommended to consult the server or storage system’s user manual or manufacturer’s documentation to ensure compatibility before purchasing and installing any new hard drives or other components.
Maintenance and Troubleshooting
Maintenance and troubleshooting of the HPE 900GB 15K RPM SAS 12GBPS SFF 512E Hot Swap Hard Drive typically involve monitoring the drive’s health and performance, identifying and resolving any issues, and performing routine maintenance tasks to ensure optimal performance and longevity. Here are some tips for maintaining and troubleshooting this hard drive:
- Monitor drive health: Use the HPE Smart Storage Administrator or other monitoring tools to regularly check the health and performance of the hard drive. Look for any signs of degradation, such as high error rates, slow read/write speeds, or abnormal noise.
- Check firmware updates: Regularly check for and apply any firmware updates for the hard drive to ensure it is running the latest stable version.
- Replace faulty drives promptly: If a drive fails or shows signs of failure, replace it promptly to avoid data loss or further damage to the system.
- Perform routine maintenance: Regularly perform routine maintenance tasks, such as cleaning the server and checking cables and connections, to ensure optimal performance and prevent issues.
- Troubleshoot issues: If you encounter any issues with the hard drive, consult the server or storage system’s user manual or manufacturer’s documentation for troubleshooting steps. Common issues may include connection problems, drive failure, or performance issues.
- Seek technical support: If you are unable to resolve an issue or need assistance with maintenance or troubleshooting, contact HPE technical support for assistance.
By following these tips for maintenance and troubleshooting, you can help ensure optimal performance and longevity of your HPE 900GB 15K RPM SAS 12GBPS SFF 512E Hot Swap Hard Drive, and avoid data loss or other issues.
Product Information
- Manufacturer Name: HPE
- MPN: 867253-002
- Type: Hard Drive – Hot Swap
- HDD Type: 900GB-15K RPM
- SKU: 867253-002
Technical Information
- Capacity : 900 GB
- Form Factor : 2.5 SFF
- Interface : SAS 12GB/S
- Data Transfer Rate : 1.2 GBPS
- Spindle Speed : 15000 RPM
- Features : Advanced Format 512e, Digitally Signed Firmware
- Dimensions (Wxdxh) : 3 In X 4.7 In X 0.6 In
- Bundled With : HPE Smartdrive Carrier
Physical
- Width : 3 In
- Depth : 4.7 In
- Height : 0.6 In
- Bundled With : HPE Smartdrive Carrier
Performance
- Drive Transfer Rate : 1.2 GBPS (External)
- Seek Time : 2.72 MS (Average) / 5.36 MS (Max)
- Track-to-track Seek Time : 0.22 MS
- Spindle Speed : 15000 RPM
Expansion & Connectivity
- Interfaces : 1 X SAS 12 GB/S
- Compatible Bay : 2.5 SFF
Environmental Parameters
- Min Operating Temperature : 50 °F
- Max Operating Temperature : 95 °F
Compatibility
- Proliant Bl460c Gen10, Dl160 Gen9, Dl20 Gen9, Dl360 Gen10, Dl360 Gen9, Dl380 Gen10, Dl380 Gen9, Dl388 Gen9, Dl560 Gen10, Dl580 Gen9, Ml110 Gen10, Ml110 Gen9, Ml350 Gen10, Xl230k Gen10, Synergy 480 Gen10, 660 Gen10
