Description
Speed and Performance
The HPE 868830-K21 is a read-intensive solid state drive (SSD) that uses the SATA interface, which supports a data transfer rate of 6 gigabits per second (6 Gbps).
The read performance of the drive can vary depending on the specific workload and configuration, but in general, it should be able to deliver high read throughput and low latency.
The drive is designed for read-intensive workloads such as data warehousing, analytics, and content delivery networks. It’s expected to have high IOPS (Input Output operations per second) for read operations and moderate IOPS for write operations.
It’s worth noting that the drive does not support NVMe protocol, which is designed for high-performance, low-latency SSDs, and delivers significantly faster performance than SATA. So if you need a higher-performance SSD, you may want to consider other options such as NVMe or PCIe SSDs.
Connectivity & Compatibility
868830-K21 is a model number for a hard disk drive (HDD) manufactured by Hewlett Packard Enterprise (HPE). The drive has a storage capacity of 3.84 terabytes (TB) and uses the SATA 6GB/s interface for data transfer. The drive is designed to be used in small form factor (SFF) equipment, which means that it has a 2.5-inch form factor.
The drive is optimized for read-intensive workloads, which means that it is designed to perform well when reading data, but may not perform as well when writing data. This makes it well-suited for use cases such as data warehousing, business intelligence, and online transaction processing.
The drive uses a SAS interface for connectivity, which stands for Serial Attached SCSI. SAS is a high-speed data transfer interface that is commonly used in enterprise storage systems. This drive is compatible with HPE ProLiant Gen10 and Gen9 servers, which are server models from HPE.
Maintenance and Troubleshooting
The 868830-K21 HPE 3.84TB SATA 6GBPS 2.5 Inch SFF SC Read Intensive DS SSD is a solid-state drive (SSD) designed for use in HPE server systems. It is a read-intensive drive, which means it is optimized for frequent read operations and is suitable for use in applications such as databases and virtualization.
Maintenance:
- Regularly check the drive’s SMART status to ensure it is functioning properly.
- Keep the drive firmware updated to the latest version to ensure optimal performance and compatibility with the host system.
- It is recommended to use HPE Smart Storage Administrator (SSA) to monitor the drive’s health and update the firmware
Troubleshooting:
- Check the host system’s event logs for any error messages related to the drive.
- Check the drive’s SMART status for any reported errors.
- If the drive is not being detected by the host system, check the system’s BIOS settings to ensure the drive is configured correctly.
- If the drive is not performing as expected, check the system’s performance metrics to see if there are any bottlenecks.
- If the drive is producing a high number of errors, it might be necessary to replace it.
Note: Always follow the manufacturer’s instructions and guidelines when performing maintenance or troubleshooting on any hardware component.
General Information
- Manufacture: Hewlett Packard Enterprise (HPE)
- MPN: 868830-K21
- Spare Part Number: 868932-001
- Model Number: VK003840GWCFK
- Assembly Number: 866615-005
- SKU: 868830-K21
- Type: Hot-Swap Solid State Drive (SSD)
- SSD Type: SATA 6GBPS
Technical Information
- Device Capacity: 3.84 TB
- Form Factor: 2.5 Inch SFF
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier (SC)
- Workload Type: Read Intensive
- Features: Digitally Signed Firmware
- Bundled With: HPE Smart Drive Carrier
Performance
- Life Time Writes: 6512
- Endurance DWPD (Drive Writes Per Day): 0.8
- Drive Transfer Rate (External): 6 GB/Sec
- Internal Data Rate (Read): 530 MBPS
- Internal Data Rate (Write): 490 MBPS
- Random Read IOPS (4KiB, Q=16): 63500
- Max Random Read IOPS (4KiB): 75500@Q32
- Random Write IOPS (4KiB, Q=16): 27500
- Max Random Write IOPS (4KiB): 27500@Q1
- Random Read Latency: 120
- Random Write Latency: 36
Power
- Power Consumption: 9 Watt
Miscellaneous
- Compliant Standards: WEEE
Environmental Parameters
- Min Operating Temperature: 32 °F
- Max Operating Temperature: 140 °F
Dimension and Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Compatibility Information
- HPE ProLiant BL Series: BL460c Gen10 (2.5 Inch)
- HPE ProLiant DL Series: DL360 Gen10 (2.5 Inch), DL360 Gen10 Base (2.5 Inch), DL360 Gen10 Entry (2.5 Inch), DL360 Gen10 High Performance (2.5 Inch), DL360 Gen10 Low (2.5 Inch), DL360 Gen10 Performance (2.5 Inch), DL360 Gen10 Solution (2.5 Inch), DL388 Gen9 (2.5 Inch), DL388 Gen9 Base (2.5 Inch), DL560 Gen10 (2.5 Inch), DL560 Gen10 Base (2.5 Inch), DL560 Gen10 Entry (2.5 Inch), DL560 Gen10 Performance (2.5 Inch), DL580 Gen10 (2.5 Inch), DL580 Gen10 Base (2.5 Inch), DL580 Gen10 Entry (2.5 Inch), DL580 Gen10 Performance (2.5 Inch)
- HPE ProLiant ML Series: ML350 Gen10 (2.5 Inch), ML350 Gen10 Base (2.5 Inch), ML350 Gen10 Entry (2.5 Inch), ML350 Gen10 Performance (2.5 Inch), ML350 Gen10 Solution (2.5 Inch), ML350 Gen10 Sub-Entry (2.5 Inch)
- HPE ProLiant XL Series: XL190r Gen9 (2.5 Inch)
- HPE Synergy 480 Gen10 Base Compute Module (2.5 Inch), 480 Gen10 Entry Compute Module (2.5 Inch), 480 Gen10 Performance Compute Module (2.5 Inch), 480 Gen10 Premium Backplane Compute Module (2.5 Inch), 480 Gen10 Standard BackPlane Compute Module (2.5 Inch), 480 Gen10 w/o Drives Compute Module (2.5 Inch), 660 Gen10 Base Compute Module (2.5 Inch), 660 Gen10 Compute Module (2.5 Inch), 660 Gen10 Entry Compute Module (2.5 Inch), 660 Gen10 Performance Compute Module (2.5 Inch), 660 Gen10 Premium Compute Module (2.5 Inch)