Description
Enterprise Grade Features and Reliability
The HPE 873367-X21 is a 3.2TB SAS 12GBPS Mixed Use Small Form Factor (SFF) Smart Carrier solid state drive (SSD). SAS (Serial Attached SCSI) is a high-speed data storage interface designed for use in enterprise environments. The SAS-12GB/s interface provides fast data transfer speeds and improved performance compared to earlier SAS versions. The Smart Carrier technology provides improved reliability and management of the SSD, making it easier to monitor, upgrade, and replace as needed. The mixed use design of the HPE 873367-X21 SSD makes it a cost-effective solution for businesses and organizations looking to upgrade their storage systems with improved performance and reliability. The use of NAND flash memory, rather than mechanical spinning disks, provides faster access times, improved reliability, and reduced power consumption. The combination of these features makes the HPE 873367-X21 SSD an enterprise-grade storage solution for businesses and organizations with demanding storage needs.
Data Storage Technology
The HPE 873367-X21 is a 3.2TB SAS 12Gbps mixed-use small form factor (SFF) Smart Carrier solid-state drive (SSD) that utilizes NAND flash memory technology to store data. NAND flash is a type of non-volatile memory that retains data even when the power is turned off. The use of NAND flash in solid-state drives provides several benefits over traditional hard disk drives (HDDs), including:
- Faster read and write speeds: NAND flash memory can access and transfer data much faster than HDDs, which can result in improved performance for storage-intensive applications.
- Low power consumption: NAND flash memory requires less power to operate than HDDs, which can help to reduce energy costs and extend battery life in mobile devices.
- Improved durability: NAND flash memory has no moving parts, which makes it less susceptible to physical damage than HDDs.
- Higher reliability: NAND flash memory has a lower failure rate than HDDs, which can result in reduced downtime and improved reliability for users.
HPE 873367-X21 also features a SAS-12Gbps interface, which provides fast data transfer speeds and supports multiple data transfer protocols. The drive also uses Smart Carrier technology, which helps to improve the performance, reliability, and management of the drive.
Maximize Storage Performance
The HPE 873367-X21 is a 3.2TB SAS-12GBPS solid-state drive (SSD) designed for mixed use cases in small form factor (SFF) systems. It uses the SAS interface for connectivity, which is a high-speed data transfer standard designed for use in data centers and enterprise storage systems. SAS offers improved performance, reliability, and scalability compared to SATA, the more common interface used in consumer-level systems.
To maximize storage performance, it is recommended to use the HPE 873367-X21 SSD in a system that is optimized for SAS connectivity and performance. This may include the use of a high-performance SAS controller, as well as adequate system resources, such as CPU, memory, and I/O bandwidth.
General Information about this HPE 873367-X21
- Manufacturer: HPE
- Part Number or SKU# 873367-X21
- Product Type : Solid State Drive
- Product Name : SAS-12GBPS
- Spare Part Number: 873571-001
- Model Number: MO003200JWDLB
- Assembly Number: 868650-004
- HPE GPN: 873370-010
Technical Information of 2TB Hard Disk Drive
- Device Capacity: 3.2 TB
- Workload Type: Mixed-Use
- Form Factor: 2.5 Inch SFF
- Plug Type: Hot Plug
- Carrier Type: Smart Carrier
- NAND Flash Memory Type: Multi-Level Cell (MLC)
- Bytes per Sector: 512
- Features: Digitally Signed Firmware (DS)
- Bundled With: HPE Smart Drive Carrier
Performance Information for SAS-12GBPS HDD
- Life Time Writes: 17500
- Endurance DWPD (Drive Writes Per Day): 3
- Drive Transfer Rate: 12 GB/Sec (External)
- MAX Seq Reads Throughput (MiB/s): 1050
- Max Seq Writes Throughput (MiB/s): 1010
- Throughput Random Read Avg. Latency uSec (4KiB, Q1): 105
- Throughput Random Write Avg. Latency uSec (4KiB, Q1): 35
- Random Read IOPS (4KiB, Q=16): 130000
- Random Writes IOPS (4KiB, Q=16): 100000
- MAX Random Read IOPS (4KiB): 170000@Q64
- MAX Random Write IOPS (4KiB): 100000@Q16
Power Consumption
- Power Idle Time: 4.24 Watt
- Power Random Read: 8.74 Watt
- Power Random Write: 8.74 Watt
- Power Sequential Read: 6.51 Watt
- Power Sequential Write: 9.93 Watt
- Power Random R/W: 8.74 Watt
Dimension and Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Compatibility
- HPE ProLiant DL Series: DL120 Gen9 (2.5 Inch), DL120 Gen9 Entry (2.5 Inch), DL160 Gen9 (2.5 Inch), DL160 Gen9 Base (2.5 Inch), DL160 Gen9 Entry (2.5 Inch), DL160 Gen9 Performance (2.5 Inch), DL160 Gen9 Thoughtspot Server (2.5 Inch), DL180 Gen9 (2.5 Inch), DL180 Gen9 Base (2.5 Inch), DL180 Gen9 Entry (2.5 Inch), DL180 Gen9 Storage (2.5 Inch), DL20 Gen9 (2.5 Inch), DL20 Gen9 Base (2.5 Inch), DL20 Gen9 Entry (2.5 Inch), DL20 Gen9 Performance (2.5 Inch), DL20 Gen9 Solution (2.5 Inch), DL20 Gen9 Special Server (2.5 Inch), DL360 Gen9 (2.5 Inch), DL360 Gen9 Base (2.5 Inch), DL360 Gen9 CMS (2.5 Inch), DL360 Gen9 Entry (2.5 Inch), DL360 Gen9 Performance (2.5 Inch), DL360 Gen9 Special Server (2.5 Inch), DL380 Gen9 (2.5 Inch), DL380 Gen9 Base (2.5 Inch), DL380 Gen9 Entry (2.5 Inch), DL380 Gen9 High Performance (2.5 Inch),
- DL380 Gen9 Performance (2.5 Inch), DL380 Gen9 Scale-up SAP HANA Tailored Datacenter Integration Compute Block (2.5 Inch), DL380 Gen9 Special (2.5 Inch), DL385 Gen10 (2.5 Inch), DL385 Gen10 Base (2.5 Inch), DL385 Gen10 Entry (2.5 Inch), DL385 Gen10 High-Performance (2.5 Inch), DL385 Gen10 Performance (2.5 Inch), DL385 Gen10 Solution (2.5 Inch), DL580 Gen10 (2.5 Inch), DL580 Gen10 Base (2.5 Inch), DL580 Gen10 Entry (2.5 Inch), DL580 Gen10 Performance (2.5 Inch) Servers
- HPE ProLiant ML Series: ML110 Gen10 (2.5 Inch), ML110 Gen10 Entry (2.5 Inch), ML110 Gen10 Performance (2.5 Inch), ML110 Gen10 Solution (2.5 Inch), ML110 Gen9 (2.5 Inch), ML110 Gen9 Base (2.5 Inch), ML110 Gen9 Entry (2.5 Inch), ML150 Gen9 (2.5 Inch), ML150 Gen9 Base (2.5 Inch), ML150 Gen9 Entry (2.5 Inch), ML150 Gen9 Performance (2.5 Inch), ML350 Gen10 (2.5 Inch), ML350 Gen10 Base (2.5 Inch), ML350 Gen10 Entry (2.5 Inch), ML350 Gen10 Performance (2.5 Inch), ML350 Gen10 Solution (2.5 Inch), ML350 Gen10 Sub-Entry (2.5 Inch), ML350 Gen9 (2.5 Inch), ML350 Gen9 Base (2.5 Inch), ML350 Gen9 Entry (2.5 Inch), ML350 Gen9 Performance (2.5 Inch) Servers
- HPE ProLiant XL Series: XL170r Gen10 (2.5 Inch) and XL450 Gen10 (2.5 Inch) Servers
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
