Description
Key Features and Specifications
J4858-61201 is a transceiver module manufactured by Hewlett Packard Enterprise (HPE) that enables the transmission and reception of data over Gigabit Ethernet networks. This module is designed for use with HPE Procurve switches and is compatible with various models, including the X121 and X131.
The key features and specifications of the J4858-61201 transceiver module are as follows:
- Data Rate: The module is capable of transmitting and receiving data at a rate of 1 Gbps.
- Interface: The module supports a duplex LC connector interface for connection with the fiber optic cable.
- Compatibility: The module is compatible with both single-mode and multi-mode fiber optic cables.
- Maximum Cable Distance: The module supports a maximum cable distance of up to 550m on multi-mode fiber and up to 10 km on single-mode fiber.
- Wavelength: The module operates at a wavelength of 1310 nm.
- Duplexing: The module supports full-duplex communication, allowing for simultaneous transmission and reception of data.
- Hot-Swappable: The module is hot-swappable, allowing it to be installed or removed from a switch without the need for powering off the switch.
- Standards Compliance: The module complies with IEEE 802.3z standards for Gigabit Ethernet transmission.
Deployment Scenarios and Use Cases
J4858-61201 is an HPE Procurve X121 1 Gbps Gigabit Ethernet full-duplex transceiver, which is a small form-factor pluggable (SFP) transceiver designed for use with HPE networking equipment. This transceiver supports gigabit Ethernet speeds and full-duplex communication, making it suitable for a variety of deployment scenarios and use cases.
Some possible deployment scenarios and use cases for J4858-61201 transceivers include:
- Building-to-building connectivity: If you need to connect two or more buildings on a campus or in a business park, J4858-61201 transceivers can be used with HPE switches to provide high-speed, reliable connectivity over fiber optic cables.
- Server connectivity: J4858-61201 transceivers can be used to connect servers to switches or other networking equipment. This can help to improve network performance and reduce latency, which is especially important in applications such as database servers or high-performance computing clusters.
- Data center connectivity: J4858-61201 transceivers are often used in data center environments to provide connectivity between switches and other networking equipment. They can help to reduce cabling clutter and simplify network management, which is important in high-density data center environments.
- Network aggregation: J4858-61201 transceivers can be used to aggregate multiple network connections into a single high-bandwidth link. This can help to improve network performance and reduce the number of cables required, which can be especially important in situations where space is at a premium.
- Telecommunications: J4858-61201 transceivers can be used in telecommunications applications to provide high-speed, reliable connectivity over fiber optic cables. This can be useful in situations where long-distance communication is required, such as connecting remote offices or providing internet connectivity to rural areas.
Physical Design and Installation Process
The J4858-61201 HPE Procurve X121 1 GBps Gigabit Ethernet Full-Duplex Transceiver is a small form-factor pluggable (SFP) transceiver designed for use in HPE Procurve switches and other compatible devices. The physical design and installation process for this transceiver is relatively straightforward and can be completed with the following steps:
- Ensure that the switch or device you will be installing the transceiver in is powered off and unplugged from the electrical outlet.
- Locate the SFP slot on the device. This is typically found on the front or back panel of the switch, and is usually labeled as such.
- Remove the protective cover from the SFP slot by gently pressing down on the release latch and sliding the cover off.
- Take the J4858-61201 transceiver and ensure that the connectors are clean and free of any debris or dust. If necessary, use a lint-free cloth or compressed air to clean the connectors.
- Insert the transceiver into the SFP slot, making sure to align the connectors with the corresponding slots in the device.
- Gently push the transceiver into the slot until it clicks into place. The latch on the transceiver should snap into the slot on the device.
- If necessary, repeat steps 3-6 for additional transceivers.
- Power on the switch or device and wait for it to initialize. The switch should automatically detect the transceiver and configure it for use.
- Verify that the transceiver is functioning correctly by checking the device’s status indicators or by running diagnostic tests.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: J4858-61201
- Type: Networking
- Sub-Type: GBIC-SFP
- Device Type : Transceiver Module
- Form Factor : Plug-In Module
- Interface (Bus) Type : Sfp (Mini-Gbic)
Networking
- Connectivity Technology : Wired
- Cabling Type : Ethernet 1000base-Sx
- Data Link Protocol : Gigabit Ethernet
- Data Transfer Rate : 1 GBPS
- Features : Full Duplex Capability
- Compliant Standards : IEEE 802.3z
Expansion / Connectivity
- Interfaces : 1 X Network – Ethernet 1000base-Sx – Lc Multi-Mode X 2
- Compatible Slots : 1 X Sfp (Mini-Gbic)
