Description
Product Specifications Of HPE J9150-69101 X132 10GbE SFP+ LC SR 10GBPS
The HPE J9150-69101 X132 10GbE SFP+ LC SR 10GBPS Transceiver Module is a networking component that enables communication between devices over a fiber optic network. It is a small, hot-pluggable transceiver that can be easily inserted and removed from a switch or router. The HPE J9150-69101 is designed to transmit data at a rate of 10 Gigabits per second (10Gbps) over a distance of up to 300 meters. In this article, we will provide a detailed explanation of the HPE J9150-69101 X132 10GbE SFP+ LC SR 10GBPS Transceiver Module, its features, and its applications.
Features
The HPE J9150-69101 X132 10GbE SFP+ LC SR 10GBPS Transceiver Module is designed to work with HPE networking equipment. It is a Small Form-factor Pluggable Plus (SFP+) module, which means that it can be easily inserted and removed from a switch or router. The HPE J9150-69101 uses LC fiber connectors, which are the most common type of fiber connector in use today.
The HPE J9150-69101 is designed to transmit data at a rate of 10 Gigabits per second (10Gbps) over a distance of up to 300 meters. It uses multi-mode fiber optic cables to transmit data over a short distance. The HPE J9150-69101 supports the 10GBASE-SR Ethernet standard, which is used for high-speed networking applications.
The HPE J9150-69101 also includes digital diagnostic monitoring capabilities, which allow network administrators to monitor the status of the transceiver and the fiber optic link. This information can be used to diagnose and troubleshoot network problems.
Applications
The HPE J9150-69101 X132 10GbE SFP+ LC SR 10GBPS Transceiver Module is used in a variety of networking applications where high-speed data transmission is required. It is commonly used in data center environments, where it is used to connect servers and storage devices to switches and routers. The HPE J9150-69101 can also be used in campus networks and metropolitan area networks (MANs) where high-speed connectivity is required over short distances.
One of the main advantages of the HPE J9150-69101 is its small form-factor. It can be easily inserted and removed from a switch or router, which makes it ideal for use in environments where space is limited. The HPE J9150-69101 can also be used in conjunction with other networking components to create a highly scalable network infrastructure.
Installation
The HPE J9150-69101 X132 10GbE SFP+ LC SR 10GBPS Transceiver Module is designed to be hot-pluggable, which means that it can be inserted and removed from a switch or router without the need to power down the device. To install the HPE J9150-69101, follow these steps:
- Ensure that the device is powered off and unplugged from the power source.
- Locate the SFP+ slot on the device. This is usually located on the front or rear of the device.
- Remove the dust cover from the SFP+ slot.
- Insert the HPE J9150-69101 into the SFP+ slot. Ensure that the transceiver is properly aligned with the slot.
- Gently push the HPE J9150-69101 into the slot until it clicks into place.
- Replace the dust cover on the SFP+ slot.
Main Specification about this HPE J9150-69101
- Manufacturer: HPE
- Part Number or SKU # J9150-69101
- Device Type : Transceiver Module
Networking
- Connectivity Technology : Wired
- Cabling Type : Ethernet 10Gbase-SR
- Data Link Protocol : 10 Gigabit Ethernet
- Max Transfer Distance : 1000 FT
- Optical Wave Length : 850 Nm
- Compliant Standards : IEEE 802.3AE
Expansion / Connectivity
- Interfaces : 1 X Network – Ethernet 10Gbase-SR – LC Multi-Mode
- Compatible Slots : 1 X SFP+
