Description
Large Storage Capacity (10TB) HDD
MB010000GWAYN HPE 10TB 7.2K RPM SATA 6GBPS 3.5inch LFF Helium 512e Hard Drive is a high-capacity hard drive designed for enterprise-level storage needs. It offers a large storage capacity of 10 terabytes, which is equivalent to 10,000 gigabytes or 10,000,000 megabytes. This large storage capacity is ideal for businesses and organizations that need to store large amounts of data, such as financial records, customer information, and media files.
The 10TB capacity of the hard drive means that it can store approximately:
- 2 million high-resolution photos
- 2,000 hours of HD video
- 4 million songs
- 1,000,000 documents (assuming an average document size of 10 MB)
The large storage capacity of the MB010000GWAYN hard drive makes it an ideal solution for businesses that need to store and manage large amounts of data in a single location. It can help improve operational efficiency by reducing the need for multiple hard drives and increasing the speed and ease of data access and retrieval.
The 512e format of the MB010000GWAYN hard drive allows it to maintain high storage capacity while maintaining compatibility with legacy systems that may not support larger sector sizes. This format enables the hard drive to use a combination of 512-byte and 4K-byte sector sizes, providing a balance between capacity and performance.
The large storage capacity of the MB010000GWAYN hard drive makes it an ideal solution for businesses and organizations that need to store and manage large amounts of data. It can help improve operational efficiency, reduce the need for multiple hard drives, and increase the speed and ease of data access and retrieval.
Maintenance and Troubleshooting Tips
Maintenance and troubleshooting tips for the HPE MB010000GWAYN hard drive can help improve the lifespan and performance of the device. Here are some tips to consider:
- Keep the hard drive clean: Dust and debris can accumulate inside the hard drive, causing it to overheat and malfunction. To prevent this, clean the hard drive regularly with a soft cloth or compressed air.
- Monitor the temperature: Hard drives operate best in cool environments, so it’s important to monitor the temperature regularly. If the hard drive temperature goes above 50°C, it could indicate a problem with ventilation or cooling, and action should be taken immediately.
- Use a surge protector: Power surges can damage the hard drive’s circuitry, so it’s essential to use a surge protector to prevent power fluctuations from damaging the device.
- Check for firmware updates: Firmware updates can improve the performance of the hard drive and address any known issues or bugs. Check for updates on HPE’s website or through the HPE Smart Update Manager.
- Perform regular backups: Regular backups of important data can prevent data loss in the event of a hard drive failure. Use backup software to automate the process and ensure that all critical data is backed up.
- Use diagnostic tools: HPE offers a variety of diagnostic tools to help troubleshoot issues with their hard drives. Use these tools to identify and resolve any problems with the hard drive.
- Check for bad sectors: Bad sectors can cause data loss and system crashes. Use disk scanning software to check for and repair any bad sectors on the hard drive.
- Replace the hard drive if necessary: If the hard drive is beyond repair or has reached the end of its lifespan, it’s important to replace it with a new one. HPE offers a variety of replacement options, and it’s recommended to consult with a professional if you’re unsure of how to replace the hard drive yourself.
By following these maintenance and troubleshooting tips, users can ensure that their HPE MB010000GWAYN hard drive operates at peak performance and stays in good working condition for as long as possible.
Energy Efficiency
The HPE MB010000GWAYN is a high-capacity 10TB hard drive with a 7.2K RPM spindle speed and a SATA 6Gbps interface. It uses a 3.5-inch LFF (Large Form Factor) design and utilizes helium technology to reduce power consumption and increase overall energy efficiency.
Helium technology is a newer innovation in hard drive design that replaces the traditional air-filled design with helium gas, which is less dense and lighter than air. This allows for more platters and read/write heads to be installed in the same amount of space, resulting in higher storage capacity and lower power consumption.
The HPE MB010000GWAYN’s helium technology results in lower power consumption and improved energy efficiency. Specifically, the hard drive consumes only 6.9 watts when idle and 9.1 watts when in use, making it a great option for energy-efficient data centers and other applications where power usage is a concern. Additionally, the lower power consumption helps to reduce the overall heat generated by the hard drive, resulting in a cooler and more reliable system.
Product Information
- Manufacturer Name: HPE
- Type: Hard Drive – Hot-Swap
- HDD Type: SATA 6GBPS
- MPN: MB010000GWAYN
- Option Part Number: 857650-B21
- Spare Part Number: 857968-001
- Model Number: MB010000GWAYN
- Assembly Number: 857643-002
- HPE GPN: 857653-002
- SKU: MB010000GWAYN
Technical Information
- Capacity: 10 TB
- Form Factor: 3.5 inch LFF
- Interface: SATA 6Gbps
- Bytes per Sector: 512
- Drive Technology (Fill): Helium
- Plug Type: Hot Plug
- Format Type: 512e
- Carrier Type: Low Profile Carrier
- Workload: Midline
- Features: Advanced format 512e, Digitally Signed Firmware
- Bundled with: HPE Low Profile Carrier
Extended Specifications
- Device Type : Hard Drive – Hot-swap
- Capacity : 10 TB
- Form Factor : 3.5 LFF
- Interface : SATA 6GB/S
Performance
- Drive Transfer Rate : 600 MBPS (external)
- Spindle Speed : 7200 RPM
- Interfaces : 1 X SATA 6 GB/S
- Compatible Bay : 3.5 Lff Hot Swap Hard Drive With Tray.
Dimension and Weight
- Width: 4 Inch
- Depth: 5.8 Inch
- Height: 1 Inch
- Weight: 1.52 LBS
Environmental Parameters
- Min Operating Temperature: 50 °F (10°C)
- Max Operating Temperature: 95 °F (35°C)
Compatibility Information
- Dell PowerEdge T-Series T20 T100 T105 T110 (Gen I,II) T300 T310-
- T320 T330 T410 T420 T430 T605 T610 T620 T630 T710 Servers.
- Dell PowerEdge R-Series R210 (Gen I, II) R220 R230 R300 R310 R320-
- R330 R410 R415 R420 R430 R510 R520 R530 R530XD
- Dell PowerEdge C-Series C1100 C2100 C6100 C6220 Servers.
- Dell PowerEdge M-Series M420 M510 M520 M610x M630 M710HD M830 M915 Blade Servers.
