Description
TLC (Triple-Level Cell) NAND Flash Memory
TLC (Triple-Level Cell) NAND flash memory is a type of NAND flash memory technology that stores three bits of data in each memory cell. This means that each memory cell can store more data than SLC (Single-Level Cell) or MLC (Multi-Level Cell) NAND flash memory cells.
In the case of HPE P04474R-X21 480GB SATA-6GBPS SC Read Intensive TLC solid state drive, TLC NAND flash memory is used to provide high-capacity storage in a cost-effective way. The triple-level cells used in this SSD can store three bits of data per cell, which means that the SSD can store more data than an SLC or MLC SSD with the same number of cells.
However, the downside of using TLC NAND flash memory is that it can be less reliable than SLC or MLC NAND flash memory. This is because each cell is being used to store more bits of data, which can lead to a shorter lifespan and increased risk of data corruption or loss. To mitigate these risks, HPE has implemented advanced error correction techniques and wear-leveling algorithms in the P04474R-X21 SSD.
Read-Intensive SSDs and Their Applications
Read-intensive solid-state drives (SSDs) are designed to handle workloads that are primarily focused on reading data, rather than writing or overwriting it. These types of SSDs are optimized for fast read speeds, low latency, and high endurance to meet the demands of applications that require high throughput with minimal write activity.
HPE P04474R-X21 480GB SATA-6GBPS SC Read Intensive TLC solid-state drive is specifically designed for read-intensive workloads, such as data analytics, content delivery, and media streaming. It is built with Triple-Level Cell (TLC) NAND flash memory, which provides a balance between performance and cost, making it an ideal choice for cost-sensitive applications.
The drive is also equipped with advanced features such as HPE SmartSSD Wear Gauge technology, which enables predictive maintenance, allowing administrators to detect potential failures and replace the drive before it fails. This technology can also extend the lifespan of the SSD, ensuring that it lasts longer than other SSDs designed for similar applications.
Enhanced SSD Performance and Reliability
HPE P04474R-X21 480GB SATA-6GBPS SC Read Intensive TLC Solid State Drive is designed to offer enhanced performance and reliability to meet the needs of modern data-intensive applications. HPE has included several features that enhance the SSD’s performance and reliability, some of which include:
- End-to-End Data Protection: The SSD is equipped with a suite of data protection features that ensure data integrity throughout its lifespan. These features include parity checking, error correction, and wear leveling.
- HPE SmartSSD Wear Gauge Technology: This technology allows users to monitor the health of their SSD in real-time. It predicts the remaining lifespan of the drive based on its usage and workload, allowing for proactive maintenance and replacement.
- Dynamic Power Management: The SSD has a built-in power management feature that optimizes power consumption to reduce energy costs while maintaining high performance.
- Advanced Encryption: The SSD supports AES-256 encryption, which helps to secure data at rest.
- High Performance: With read speeds of up to 555 MB/s and write speeds of up to 520 MB/s, the HPE P04474R-X21 480GB SATA-6GBPS SC Read Intensive TLC Solid State Drive delivers high-performance levels for data-intensive workloads.
- Reliability: The SSD’s Mean Time Between Failure (MTBF) is up to 1.6 million hours, ensuring that the drive will continue to operate reliably for extended periods.
Product Information about this HPE SSD
- Manufacture: HPE
- Part Number or SKU# P04474R-X21
- Type: Solid State Drive – Hot-Swap
- SSD Type: SATA 6GBPS
- Spare Part Number: P05312-001
- Model Number: VK000480GWSXF
- Assembly Number: P03483-001
Technical Information of HPE 480GB Solid State Drive
- Capacity: 480GB
- Form Factor: 2.5 inch SFF
- Interface: SATA 6Gbps
- NAND Flash Memory Type: Triple-level cell (TLC)
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier (SC)
- Workload Type: Read Intensive
- Bundled with: HPE SmartDrive Carrier (SC)
- Features: Digitally Signed Firmware (DS)
Product Dimensions & Weight for this HPE 2.5 inch SFF SSD
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Environmental Parameters of HPE Solid State Drive
- Min Operating Temperature: 32 °F
- Max Operating Temperature: 140 °F
Compatibility
- HPE ProLiant DL Series: DL20 Gen10 (2.5 inch), DL20 Gen10 Entry (2.5 inch), DL20 Gen10 Performance (2.5 inch), DL20 Gen10 solution (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Plus (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch),
- DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 Server for CTERA (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL385 Gen10 (2.5 inch), DL385 Gen10 Base (2.5 inch), DL385 Gen10 Entry (2.5 inch), DL385 Gen10 High-Performance (2.5 inch), DL385 Gen10 Performance (2.5 inch), DL385 Gen10 Plus (2.5 inch), DL385 Gen10 Plus Entry (2.5 inch), DL385 Gen10 SMB (2.5 inch), DL385 Gen10 Solution (2.5 inch), DL388 Gen10 (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
- HPE ProLiant ML Series: ML110 Gen10 (2.5 inch), ML110 Gen10 Entry (2.5 inch), ML110 Gen10 Performance (2.5 inch), ML110 Gen10 Solution (2.5 inch), ML30 Gen10 (2.5 inch), ML30 Gen10 Entry (2.5 inch), ML30 Gen10 Performance (2.5 inch), ML30 Gen10 Solution (2.5 inch), ML350 Gen10 (2.5 inch), ML350 Gen10 Base (2.5 inch), ML350 Gen10 Entry (2.5 inch), ML350 Gen10 High Performance (2.5 inch), ML350 Gen10 Performance (2.5 inch), ML350 Gen10 SMB (2.5 inch), ML350 Gen10 Solution (2.5 inch), ML350 Gen10 Special Server (2.5 inch), ML350 Gen10 Sub-Entry (2.5 inch)
- HPE Synergy Series: 480 Gen10 Compute Module (2.5 inch), 480 Gen10 Premium Backplane Compute Module (2.5 inch), 480 Gen10 Standard BackPlane Compute Module (2.5 inch), 480 Gen10 w/o Drives Compute Module (2.5 inch), 660 Gen10 Compute Module (2.5 inch), 660 Gen10 Premium Compute Module (2.5 inch), 680 Gen9 4S-EX Compute Module (2.5 inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
